ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
Cordless
Drill/Driver
GTX18250,
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
GTX24250
• Taipei • New York • Verona • London • Paris
050531 ED5 JJ
1
ページ2に含まれる内容の要旨
Contents Warranty 2 Full 2 Years Home Use Warranty Description of symbols 3 Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass Specifications 3 manufacturing techniques, a tool may not live up to our Safety instructions 4 required level of performance and you may need the Additional safety instructions for drills 6 assistance of our service department. Additional safety instructions for the charger 6 This product is warranted for a
ページ3に含まれる内容の要旨
Description of symbols Dear Customer The rating plate on your tool may show symbols. These If you require any help with your product, whether it represent important information about the product or is a Warranty claim, spare part or user information, instructions on its use. please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in Wear hearing protection. New Zealand. Wear eye protection. Wear breathing protection. Introduction Double insula
ページ4に含まれる内容の要旨
Personal safety Safety instructions • Stay alert, watch what you are doing and use WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in common sense when operating a power tool. Do not use a power tool while you are tired or under the electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your influence of drugs, alcohol, or medication. A moment of inattention while operating power t
ページ5に含まれる内容の要旨
• Do not use the power tool if the switch does not Additional safety instructions for drills turn it on and off. Any power tool that cannot be Wear ear protectors with impact drills. controlled with the switch is dangerous and must be Exposure to noise can cause hearing loss. repaired. Use auxiliary handles supplied with the tool. • Disconnect the plug from the power source before Loss of control can cause personal injury. making any adjustments, changing accessories, or • If possible,
ページ6に含まれる内容の要旨
If in doubt, do not plug in the tool. Using a power source • D ANGER. If the battery pack is cracked or damaged in with a voltage less than the nameplate rating is harmful any other way, do not insert it in the charger. There is to the motor. a danger of electric shock or electrocution. The tool must be used only for its prescribed purpose. • WARNING. Do not allow any liquid to come into Any use other than those mentioned in this Manual will contact with the charger. There is a danger of el
ページ7に含まれる内容の要旨
• To reduce the risk of an electric shock, unplug the • T he battery pack utilizes nickel-cadmium cells. charger from the power supply before attempting to Cadmium is considered to be a toxic material. Use an clean it. Removing the battery alone does not reduce environmentally safe disposal unit at a municipal the risk. waste disposal centre to dispose of a damaged or worn out battery. • Never attempt to connect two chargers together. • D o not store or use the tool and battery pack in U
ページ8に含まれる内容の要旨
Know your product 6 This drill is mainly used for drilling in wood or metal sheet and 5 screwdriving. Use the tool and accessories only for intended applications. All other applications are expressly ruled out. 1. Keyless chuck 1 2. Torque collar 2 3. Trigger with variable speed control 4. F orward/reverse switch 5. Side handle 4 6. Side handle clamp knob 3 7. Battery pack release tabs 8. Rechargeable battery pack 9. Charger 10. LED Lights 11. Battery indicator button 12. LED Light swi
ページ9に含まれる内容の要旨
3. The red light (b), should Fitting and removing the battery pack begin to glow continuously, To remove the battery pack from the drill firmly press the indicating that the battery battery release tabs (7) at either side of the battery pack, pack is receiving a “Fast and slide the battery backward out of the tool. Charge”. To install the battery pack, align rails, on the tool with the tabs on the battery pack and slide the battery pack on to the drill. Ensure the battery pack is si
ページ10に含まれる内容の要旨
Always unplug the charger when not in use and store in a dry secure place. Avoid charging or storing your battery in temperatures below 0ºC and above 40ºC. Battery indicator To activate the battery indicator feature first pull the trigger switch (3) then press Note. You can only change the direction of rotation of the the battery indicator button drill using the forward/reverse switch when the trigger is (11), this will display the level NOT depressed. of charge remaining in the For
ページ11に含まれる内容の要旨
Inserting and removing bits Drilling This drill has a keyless chuck, which means that a chuck Drilling metals key is not needed to secure a bit in the drill. • Always clamp sheet metal. 1. Open the chuck by holding • Support thin metal with a block of wood to avoid the rear section of the chuck distorting it. firm and rotating the front • Use a punch to mark the centre of the hole. section in a anti-clockwise direction, sufficiently enough • Use a suitable lubricant for the material you
ページ12に含まれる内容の要旨
Chuck replacement The chucks of reversible drills are always fixed by a screw with a left-hand thread. The screw, which is located in the centre of the chuck, must be removed before the chuck can be removed. To remove the screw, turn it in a clockwise direction. The chuck can now be removed by unscrewing it anti-clockwise. If you have trouble removing the chuck take the drill to your nearest authorised service centre for chuck replacement. Caution. Always ensure that the drill is switched
ページ13に含まれる内容の要旨
Carefully read the entire Instruction Manual before using this product. With continuing product development changes may Before returning this product for a have occurred which render the product received Warranty Claim or any other reason slightly different to that shown in this instruction Please Call 1300 880 001 (Australia) manual. The manufacturer reserves the right to or 0800 445 721 (New Zealand) change specifications without notice. Note: Specifications may differ from country to
