ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
Hammer Drill
GTX1850K,
• Melbourne • Perth • Auckland • Hong Kong • Shanghai GTX2450K
050531 ED6 JJ
• Taipei • New York • Verona • London • Paris
1
ページ2に含まれる内容の要旨
Contents Warranty 2 Description of symbols 3 Full 2 Years Home Use Warranty Specifications 3 Whilst every effort is made to ensure your complete Safety instructions 4 satisfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live up to our Additional safety instructions for drills 5 required level of performance and you may need the Additional safety instructions for the charger 6 assistance of our service department. Additional safety instructions f
ページ3に含まれる内容の要旨
Description of symbols Dear Customer The rating plate on your tool may show symbols. These If you require any help with your product, whether it represent important information about the product or is a Warranty claim, spare part or user information, instructions on its use. please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in Wear hearing protection. New Zealand. Wear eye protection. Wear breathing protection. Introduction Double insula
ページ4に含まれる内容の要旨
Personal safety Safety instructions • Stay alert, watch what you are doing and use WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in common sense when operating a power tool. Do not use a power tool while you are tired or under the electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your influence of drugs, alcohol, or medication. A moment of inattention while operating power t
ページ5に含まれる内容の要旨
• Do not use the power tool if the switch does not Additional safety instructions for drills turn it on and off. Any power tool that cannot be Wear ear protectors with impact drills. controlled with the switch is dangerous and must Exposure to noise can cause hearing loss. be repaired. Use auxiliary handles supplied with the tool. • Disconnect the plug from the power source before Loss of control can cause personal injury. making any adjustments, changing accessories, or • If possible,
ページ6に含まれる内容の要旨
If in doubt, do not plug in the tool. Using a power source • W ARNING. Do not allow any liquid to come into contact with a voltage less than the nameplate rating is harmful with the charger. There is a danger of electric shock. to the motor. • To allow the battery pack to cool down after charging, The tool must be used only for its prescribed purpose. do not place it in a hot environment such as a metal Any use other than those mentioned in this Manual will shed or open trailer left in the s
ページ7に含まれる内容の要旨
• Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 104°F (40°C) such as alongside sheds or metal structures in the summer. • The charger is designed for use from a standard household electrical supply (230–240 volts). Do not attempt to connect the charger to a supply with a different supply. • If you wish to charge a second battery pack, unplug the charger from the mains supply and leave it for at least 15 minutes. After this time
ページ8に含まれる内容の要旨
Know your product This drill is mainly used for drilling in wood or metal sheet and screwdriving. Use the tool and 6 14 accessories only for intended applications. All other applications are expressly ruled out. 1. Keyless chuck 2. Torque adjustment/hammer selection collar 3. Trigger with variable speed control 4. F orward/reverse switch 4 5. Side handle 6. Side handle clamp knob 5 7. Battery pack release tabs 2 8. R echargeable battery pack 3 1 9. Slim line adaptor 10. Charger 13 11 12
ページ9に含まれる内容の要旨
3. Plug in the charger and switch Unpacking on. The red LED indicator will Due to modern mass production techniques, it is unlikely show power to the adaptor and that your GMC Power Tool is faulty or that a part is that charging is missing. If you find anything wrong, do not operate the taking place. tool until the parts have been replaced or the fault has 4. The battery charging time is been rectified. Failure to do so could result in serious approximately 3–5 hours. The personal in
ページ10に含まれる内容の要旨
LED Work area light Drilling positions The drill has 3 LED lights (11) This symbol indicates the DRILLING MODE. Used for to illuminate the work area and all normal drilling (Wood, Aluminium, and Steel) in improve vision when drilling in this mode the clutch is deactivated. areas with insufficient light. This symbol indicates the HAMMER MODE. This mode To turn the LED lights on and will activate hammer action, whilst drilling. For best off depress the LED light switch results in hamme
ページ11に含まれる内容の要旨
application and tighten the side handle clamp knob (6) Inserting and removing bits to secure it in place. The drill is fitted with auto spindle lock which means if you try and rotate the chuck by hand the spindle of the drill Drilling will automatically lock. This means you only need to grasp the chuck and rotate the chuck housing to remove or fit Drilling metals accessories. • For maximum performance, use high speed steel bits for metal or steel drilling. This drill has a keyless chuck,
ページ12に含まれる内容の要旨
Drilling wood Chuck installation • F or maximum performance, use high speed steel bits for 1. S crew the chuck on wood drilling. by hand as far as it will go and insert • Ensure that the mode selector is in normal drilling mode. screw (LH thread). • B egin drilling at a very low speed to prevent the bit from 2. T ighten the chuck slipping off the starting point. Increase the speed as the around the shorter drill bites into the material. end of hex key (not • When drilling through hol
ページ13に含まれる内容の要旨
13
ページ14に含まれる内容の要旨
14
ページ15に含まれる内容の要旨
15
ページ16に含まれる内容の要旨
Carefully read the entire Instruction Manual before using this product. With continuing product development changes may Before returning this product for a have occurred which render the product received Warranty Claim or any other reason slightly different to that shown in this instruction Please Call 1300 880 001 (Australia) manual. The manufacturer reserves the right to or 0800 445 721 (New Zealand) change specifications without notice. Note: Specifications may differ from country to
