ページ1に含まれる内容の要旨
Warranty Conditions
Australia & New Zealand Only
Owners Manual
Rover Mowers Limited warrant that this machine This warranty excludes fair wear and tear, or any damage
is free from defects in material and workmanship. caused by misuse or abuse. Parts such as blades, blade
This warranty is limited to making good or replacing bolts, v-belts and spark plugs, which can be subjected
any part which appears upon inspection by the to use beyond their normal intended working capacity
manufacturer o
ページ2に含まれる内容の要旨
TM Rover Mowers Limited Chip ‘N’ Shred COMPOSTING Handle 5.1 Mulch 600mm. The compost heap should be covered to keep it Baffle from becoming water logged or drying out completely. Mulch is a mixture of broken down vegetable and organic To aid in the decomposition of the mulch, the compost materials which is used in the creation of compost or heap should be turned over regularly. 2 used as a covering in a garden bed. 3 Right Compost Bin 5 Hand 5.2 Compost These either take the form of a dr
ページ3に含まれる内容の要旨
TM Rover Mowers Limited Chip ‘N’ Shred MAINTENANCE R-Clip Engaged 4.5 Chipper blade removal and fitting 4.8 Flail removal Chipper blade removal 1. Remove the hopper assembly. 2. Remove the belt guard. TM 1. Stop the Chip ‘N’ Shred and remove the spark plug 3. Remove the chipper tube assembly. Disengaged lead from the spark plug, or remove the power cord 4. Rotate the rotor assembly until the flail bar to be from the power supply. removed is opposite the pilot hole in th
ページ4に含まれる内容の要旨
TM TM Rover Mowers Limited Chip ‘N’ Shred PREFACE Rover Mowers Limited Chip ‘N’ Shred OPERATION Congratulations on your purchase of a quality Australian made and owned ROVER product. 3.8 Screens 3.10 Screen fitting TM This manual covers the operation of the petrol and electric powered Rover Chip ‘N’ Shred TM Two screens are supplied with the Chip ‘N’ Shred , the 1. Switch the engine off and remove the spark plug lead Please read and understand this Owners Manual, and the accompanying Engine
ページ5に含まれる内容の要旨
TM TM Rover Mowers Limited Chip ‘N’ Shred SETTING UP Rover Mowers Limited Chip ‘N’ Shred SAFETY INSTRUCTIONS 2.7 Fuel 3. Using a clean funnel fill the fuel tank with clean fresh Training * If the cutting mechanism strikes any foreign objects unleaded petrol. or if the machine should make any unusual noise TM 1. Position the Chip ‘N’ Shred on a level surface in a 4. Replace the fuel tank cap. * Become familiar with the Owner’s Manual before or vibration, immediately switch off the engine and
ページ6に含まれる内容の要旨
TM TM Rover Mowers Limited Chip ‘N’ Shred SAFETY INSTRUCTIONS Rover Mowers Limited Chip ‘N’ Shred 2. SETTING UP General Electrical Safety Rules 7. Make sure the extension cord is in good condition. A 2.2 Hopper handle and baffle assembly 2.4 Chipper tube to body cord with cracked or broken insulation is hazardous, 1. Avoid dangerous environments such as damp particularly in the presence of moisture or combustible The feed hopper as supplied with the Chip ‘N’ WARNING locations. material. It
ページ7に含まれる内容の要旨
TM TM Rover Mowers Limited Chip ‘N’ Shred SAFETY INSTRUCTIONS Rover Mowers Limited Chip ‘N’ Shred 2. SETTING UP General Electrical Safety Rules 7. Make sure the extension cord is in good condition. A 2.2 Hopper handle and baffle assembly 2.4 Chipper tube to body cord with cracked or broken insulation is hazardous, 1. Avoid dangerous environments such as damp particularly in the presence of moisture or combustible The feed hopper as supplied with the Chip ‘N’ WARNING locations. material. It
ページ8に含まれる内容の要旨
TM TM Rover Mowers Limited Chip ‘N’ Shred SETTING UP Rover Mowers Limited Chip ‘N’ Shred SAFETY INSTRUCTIONS 2.7 Fuel 3. Using a clean funnel fill the fuel tank with clean fresh Training * If the cutting mechanism strikes any foreign objects unleaded petrol. or if the machine should make any unusual noise TM 1. Position the Chip ‘N’ Shred on a level surface in a 4. Replace the fuel tank cap. * Become familiar with the Owner’s Manual before or vibration, immediately switch off the engine and
ページ9に含まれる内容の要旨
TM TM Rover Mowers Limited Chip ‘N’ Shred PREFACE Rover Mowers Limited Chip ‘N’ Shred OPERATION Congratulations on your purchase of a quality Australian made and owned ROVER product. 3.8 Screens 3.10 Screen fitting TM This manual covers the operation of the petrol and electric powered Rover Chip ‘N’ Shred TM Two screens are supplied with the Chip ‘N’ Shred , the 1. Switch the engine off and remove the spark plug lead Please read and understand this Owners Manual, and the accompanying Engine
ページ10に含まれる内容の要旨
TM Rover Mowers Limited Chip ‘N’ Shred MAINTENANCE R-Clip Engaged 4.5 Chipper blade removal and fitting 4.8 Flail removal Chipper blade removal 1. Remove the hopper assembly. 2. Remove the belt guard. TM 1. Stop the Chip ‘N’ Shred and remove the spark plug 3. Remove the chipper tube assembly. Disengaged lead from the spark plug, or remove the power cord 4. Rotate the rotor assembly until the flail bar to be from the power supply. removed is opposite the pilot hole in th
ページ11に含まれる内容の要旨
TM Rover Mowers Limited Chip ‘N’ Shred COMPOSTING Handle 5.1 Mulch 600mm. The compost heap should be covered to keep it Baffle from becoming water logged or drying out completely. Mulch is a mixture of broken down vegetable and organic To aid in the decomposition of the mulch, the compost materials which is used in the creation of compost or heap should be turned over regularly. 2 used as a covering in a garden bed. 3 Right Compost Bin 5 Hand 5.2 Compost These either take the form of a dr
ページ12に含まれる内容の要旨
Warranty Conditions Australia & New Zealand Only Owners Manual Rover Mowers Limited warrant that this machine This warranty excludes fair wear and tear, or any damage is free from defects in material and workmanship. caused by misuse or abuse. Parts such as blades, blade This warranty is limited to making good or replacing bolts, v-belts and spark plugs, which can be subjected any part which appears upon inspection by the to use beyond their normal intended working capacity manufacturer o
