FMI PFS US GWRP16Cの取扱説明書

デバイスFMI PFS US GWRP16Cの取扱説明書

デバイス: FMI PFS US GWRP16C
カテゴリ: ガス暖房
メーカー: FMI
サイズ: 1.82 MB
追加した日付: 9/13/2013
ページ数: 28
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスFMI PFS US GWRP16Cの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、FMI PFS US GWRP16Cに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書FMI PFS US GWRP16Cをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書FMI PFS US GWRP16Cのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - FMI PFS US GWRP16Cの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
FMI PFS US GWRP16C 取扱説明書 - Online PDF
Advertisement
« Page 1 of 28 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書FMI PFS US GWRP16Cを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書FMI PFS US GWRP16Cの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

UNVENTED (VENT-FREE) INFRARED GAS HEATER
SAFETY INFORMATION AND INSTALLATION MANUAL
PFS
®
US
MODELS
GWRP16C, GWRN18C, GWRP26C, GWRN30C,
GWRP16TC, GWRN18TC, GWRP26TC, GWRN30TC
VSHRP16M, VSHRP16T, VSHRN18M, VSHRN18T,
VSHRP26M, VSHRP26T, VSHRN30M, AND VSHRN30T
WARNING: If the information in this manual is not
followed exactly, a fire or explosion may result causing
property damage, personal injury or loss of life.
— Do not store or use gasoline or other flammable
vapors and liquids in the vi

ページ2に含まれる内容の要旨

TABLE OF CONTENTS Safety .................................................................. 2 Specifications .................................................... 18 Local Codes......................................................... 4 Troubleshooting ................................................. 19 Product Identification ........................................... 4 Parts .................................................................. 22 Unpacking.........................................

ページ3に含まれる内容の要旨

SAFETY Continued Natural and Propane/LP Gas: Natural and Keep the appliance area clear propane/LP gases are odorless. An odor- and free from combustible ma- making agent is added to these gases. The terials, gasoline and other flam- odor helps you detect a gas leak. However, the odor added to the gas can fade. Gas may be mable vapors and liquids. present even though no odor exists. 1. This appliance is only for use with the type Make certain you read and understand all of gas indicated on

ページ4に含まれる内容の要旨

SAFETY Continued 11. Turn off and unplug heater and let cool 14. Before using furniture polish, wax, carpet before servicing. Only a qualified service cleaner or similar products, turn heater off. person should service and repair heater. If heated, the vapors from these products may create a white powder residue within 12. Operating heater above elevations of burner box or on adjacent walls or furni- 4,500 feet (1,371 m) could cause pilot ture. outage. 15. Provide adequate clearances aro

ページ5に含まれる内容の要旨

AIR FOR COMBUSTION AND VENTILATION Unusually Tight Construction WARNING: This heater shall The air that leaks around doors and windows may provide enough fresh air for combustion not be installed in a room or space and ventilation. However, in buildings of un- unless the required volume of in- usually tight construction, you must provide door combustion air is provided additional fresh air. by the method described in the Unusually tight construction is defined as National Fuel Gas Code,

ページ6に含まれる内容の要旨

AIR FOR COMBUSTION AND VENTILATION Continued The space in the example is a confined space DETERMINING FRESH-AIR FLOW because the actual Btu/Hr used is more than the FOR HEATER LOCATION maximum Btu/Hr the space can support. You Determining if You Have a Confined or must provide additional fresh air. Your options Unconfined Space are as follows: Use this work sheet to determine if you have A. Rework worksheet, adding the space of an a confined or unconfined space. adjoining room. If the ex

ページ7に含まれる内容の要旨

AIR FOR COMBUSTION AND VENTILATION Continued ing and one within 12" (30.5 cm) of the floor. Connect these items directly to the outdoors 12" or spaces open to the outdoors. These spaces include attics and crawl spaces. Follow the Na- tional Fuel Gas Code, ANSI Z223.1/NFPA 54, Ventilation Grills Into Adjoining Room, Air for Combustion and Ventilation for required Ventilation Option 2 Grills into Or size of ventilation grills or ducts. Adjoining Remove Room, Door into Option 1 IMP

ページ8に含まれる内容の要旨

INSTALLATION Continued IMPORTANT: Vent-free heaters add moisture LOCATING HEATER to the air. Although this is beneficial, installing This heater is designed to be mounted on a wall. heater in rooms without enough ventilation air may cause mildew to form from too much WARNING: Maintain the moisture. See Air for Combustion and Ventila- minimum clearances shown tion, page 5. If high humidity is experienced, in Figure 4. If you can, provide a dehumidifier may be used to help lower the gre

ページ9に含まれる内容の要旨

INSTALLATION Continued INSTALLING HEATER TO WALL MARKING SCREW LOCATIONS 1. Tape mounting bracket to wall where Mounting Bracket heater will be located. Make sure mount- Locate mounting bracket in heater carton. Re- ing bracket is level. move mounting bracket from heater carton. WARNING: Maintain minimum clearances shown in Figure 8. If you can, provide greater clearanc- es from floor and joining wall. Figure 6 - Mounting Bracket 2. Mark screw locations on wall (see Figure 8). Removing Fr

ページ10に含まれる内容の要旨

INSTALLATION Continued Attaching To Wall Anchor Method 3. Remove heater from mounting bracket. For attaching mounting bracket to hollow 4. If installing bottom mounting screws into walls (wall areas between studs) or solid walls hollow or solid wall, install wall anchors. (concrete or masonry) Follow steps 1 through 4 under Attaching 1. Drill holes at marked locations using To Wall Anchor Method. 5/16" drill bit. For solid walls (concrete or If installing bottom mounting screw into ma

ページ11に含まれる内容の要旨

INSTALLATION Continued 3. Align holes in base foot with mounting holes IMPORTANT: For natural gas, check gas line on bottom of cabinet (see Figure 13). pressure before connecting heater to gas line. 4. Secure base foot to heater using sheet Gas line pressure must be no greater than metal screws. 10.5" W.C.. If gas line pressure is higher, 5. Repeat for other side. heater regulator damage could occur. Wood CAUTION: For propane/LP Screw gas, never connect heater di- rectly to the propan

ページ12に含まれる内容の要旨

INSTALLATION Continued IMPORTANT: Install an equipment shutoff WARNING: Use pipe joint valve in an accessible location. The equip- ment shutoff valve is for turning on or shutting sealant that is resistant to liquid off the gas to the appliance. petroleum (LP) gas. Check your building codes for an special Install sediment trap in supply line as shown requirements for locating equipment shutoff in Figure 15. Locate sediment trap where it valve to heater. is within reach for cleaning. Loc

ページ13に含まれる内容の要旨

INSTALLATION Continued 2. Cap off open end of gas pipe where equip- 2. For natural gas, open main gas valve lo- ment shutoff valve was connected. cated on or near gas meter. For propane/ LP gas, open propane/LP supply tank 3. Pressurize supply piping system by either valve. opening propane/LP supply tank valve for propane/LP gas or opening main gas 3. Make sure control knob of heater is in the valve located on or near gas meter for OFF position. natural gas or using compressed air. 4. Check

ページ14に含まれる内容の要旨

OPERATION FOR YOUR SAFETY in the safety information, column 1. If you don’t smell gas, go to the next step. READ BEFORE LIGHTING 6. Thermostat Models: Turn control knob counterclockwise to the PILOT WARNING: If you do not fol- position. Press in control knob for five (5) low these instructions exactly, seconds. a fire or explosion may result Manual Models: Press in and turn control causing property damage, per- knob counterclockwise to the PILOT sonal injury or loss of life. positi

ページ15に含まれる内容の要旨

OPERATION Continued 10. To shut off burners only and leave pilot Control 16,000 & 26,000 & lit, turn control knob clockwise to Knob 18,000 Btu/Hr 30,000 Btu/Hr the PILOT position. WARNING: Always operate manual control heaters at the HI HI locked positions. Operation between these positions may create a possible health hazard MED MED if used in a poorly ventilated room. Read owner’s manual for complete instructions. LOW LOW CAUTION: Do not try to ad- just heating levels by usin

ページ16に含まれる内容の要旨

OPERATION Continued THERMOSTAT CONTROL CAUTION: Label all wires OPERATION prior to disconnection when The thermostatic control used on these servicing controls. Wiring errors models differs from standard thermostats. can cause improper and danger- Standard thermostats simply turn on and off the burner. The thermostat used on this heater ous operation. senses the room temperature. At times the room may exceed the set temperature. If so, CAUTION: Do not plug power the burner will sh

ページ17に含まれる内容の要旨

INSPECTING HEATERS Check pilot flame pattern and burner flame BURNER FLAME PATTERN patterns often. Figure 28 shows a correct burner flame pat- tern. Figure 29 shows an incorrect burner PILOT FLAME PATTERN flame pattern. Figure 26 shows a correct pilot flame pattern. Figure 27 shows an incorrect pilot flame pat- If burner flame pattern is incorrect, as shown in Figure 29 tern. The incorrect pilot flame is not touching the thermocouple. This will cause the thermocouple • turn heater off (see

ページ18に含まれる内容の要旨

CLEANING AND MAINTENANCE Continued We also recommend that you keep the burner assembly. There is a small pilot air inlet hole tube and pilot assembly clean and free of dust about 2" from where the pilot flame comes out and dirt. To clean these parts we recommend of the pilot assembly (see Figure 30). With the using compressed air no greater than 30 PSI. unit off, lightly blow air through the air inlet Your local computer store, hardware store or hole. You may blow through a drinking straw h

ページ19に含まれる内容の要旨

TROUBLESHOOTING WARNING: Turn off and unplug heater and let cool before servicing. Only a qualified service person should service and repair heater. CAUTION: Never use a wire, needle or similar object to clean ODS/pilot. This can damage ODS/pilot unit. Note: All troubleshooting items are listed in order of operation. OBSERvED PROBLEM POSSIBLE CAUSE REMEDY When ignitor button is 1. Ignitor electrode positioned 1. Replace pilot assembly pressed in, there is no spark wrong at ODS/pilot 2. Ign

ページ20に含まれる内容の要旨

TROUBLESHOOTING Continued OBSERvED PROBLEM POSSIBLE CAUSE REMEDY ODS/pilot lights but flame 1. Control knob not fully 1. Press in control knob fully goes out when control knob pressed in is released 2. Control knob not pressed in 2. After ODS/pilot lights, keep long enough control knob pressed in 30 seconds 3. Equipment shutoff valve not 3. Fully open equipment shut- fully open off valve 4. Pilot flame not touching 4. A) Contact local natural or thermocouple, which al- propane/LP gas company


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 FMI FVF24P 取扱説明書 ガス暖房 0
2 FMI FVF30P 取扱説明書 ガス暖房 0
3 FMI GL36ST 取扱説明書 ガス暖房 2
4 FMI FVF18PW 取扱説明書 ガス暖房 0
5 FMI CCL3924PTA/NTA 取扱説明書 ガス暖房 2
6 FMI GL36STEP 取扱説明書 ガス暖房 1
7 FMI FVF30PW 取扱説明書 ガス暖房 0
8 FMI FLAME-MAX FVFM27NR 取扱説明書 ガス暖房 0
9 FMI FVF24PW 取扱説明書 ガス暖房 0
10 FMI FVF18P 取扱説明書 ガス暖房 0
11 FMI GL36STP 取扱説明書 ガス暖房 0
12 FMI GL36STE 取扱説明書 ガス暖房 0
13 FMI PFS US GWRN18TC 取扱説明書 ガス暖房 0
14 FMI PFS US GWRN18C 取扱説明書 ガス暖房 0
15 FMI PFS US GWRN30TC 取扱説明書 ガス暖房 0
16 Allied Air Enterprises 506271-01 取扱説明書 ガス暖房 0
17 Blue Rhino ALL WEATHER WOVEN HEATER GWU9850F / 35554 取扱説明書 ガス暖房 2
18 Breckwell ECONOMY P22FSL 取扱説明書 ガス暖房 0
19 Breckwell ECONOMY P22FSA 取扱説明書 ガス暖房 0
20 Breckwell ECONOMY P22I 取扱説明書 ガス暖房 1