ページ1に含まれる内容の要旨
Tough Trike
Instructions
Model Numbers: 72643, 72644
Model Number: 72643 Model Number: 72644
Please keep these instructions for future reference.
Adult assembly is required.
Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood.
If you have any questions about this product, or are missing a part, please call
®
Fisher-Price toll-free at 1-800-432-KIDS, rather than return this product to the store.
Age: 2-5 years.
Weight Limit: 55 lbs.
WARNING
• Adult supervision is require
ページ2に含まれる内容の要旨
Parts • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • Wipe each part with a clean dry cloth before assembly. ® • If you are missing a part, please call Fisher-Price toll-free at 1-800-432-KIDS rather than return this product to the store. 8 21 21 Lock Washer - 2 9 6 22 7 # 5 " 8 x /8 Screw - 6 5 # 1 " 8 x 1 /4 Screw - 6 1 10 (ALL SHOWN ACTUAL SIZE) 11 12 22 Cap Nut - 2 13 4 3 2 16 22 17 20 15 14 21 23 18 19 Illustration Illustration Numb
ページ3に含まれる内容の要旨
Assembly IMPORTANT! Remove the cap nut assembly tools from the rear axle and save them. The cap nut assembly tools will be used for assembly steps - and then discarded when Frame the rear wheel assembly is complete. Axle Holes Rear Axle • Turn the frame on its side. • Insert the rear axle through the four axle holes in the rear of the frame. Cap Nut Cap Nut Assembly Tool Scrap Block of Wood Cap Nut Assembly Tool • Place a scrap block of wood on a flat surface. • Fit a cap nut into a c
ページ4に含まれる内容の要旨
Assembly Post Front Front Axle Wheel Assembly Rear Wheel Cover Post Front Wheel Cover • Snap a rear wheel cover into the recessed area in each • Insert the front axle assembly into the front wheel. Make rear wheel. sure the two posts on the front wheel cover fit into the corners of the square opening in the front wheel. Front Axle Pedal Hubs Metal Tab Front Wheel Cover • Fit the slots in the pedal hubs onto the metal tabs on the front axle. • Snap the pedal hubs together securely. • Slide the
ページ5に含まれる内容の要旨
Assembly Front Wheel Assembly Pedal Fork Arm Front Axle Front Axle Groove • Place a scrap block of wood under the front wheel assembly. • Place the front wheel assembly between the fork arms so the front axle rests in the groove on each fork arm. • Fit a pedal onto one end of the front axle. • With the lock washer centered over the front axle end, tap the pedal until it is secure. • Repeat this procedure to attach the other pedal to the other end of the front axle. Fender Pointed End Fork Front
ページ6に含まれる内容の要旨
Assembly Handlebar Fork Post Frame Cover Frame Wider Side Faces Forward • Snap the frame cover (wider side facing forward) on the underside of the frame. • Fit the handlebar onto the fork post. Pointed End Fork Post Key Console Frame Handlebar • Place the key console on the center of the handlebar, so that the key faces the rear. • Insert the fork post through the frame hole making sure the • Align the key console holes with the handlebar holes and pointed end of the fender faces forward. 1 " i
ページ7に含まれる内容の要旨
Assembly Helpful Hint: Check your child's fit on the Tough Trike by observing the seat to pedal distance as it is being ridden. Tank If the pedals seem too far away for your child, attach the booster seat. Back Tab Frame Front Tabs • Place the tank on the frame, as shown. • Align the hole in the tank with the hole in the frame. 5 " • Insert one /8 screw through the tank and into the frame. Tighten the screw with a Phillips screwdriver. Do not over-tighten. Attach Seat Peg Front Slots Frame Rem
ページ8に含まれる内容の要旨
Assembly Maintenance • Check the plastic parts regularly and if broken or cracked, 22A Model Number 72643 dispose of them properly. • Check all fasteners regularly to be sure they are tight. If the 3 fasteners are not tight, tighten them as necessary. 7 5 •To clean the Tough Trike, use a mild soap and water 4 2 solution and clean cloth. Rinse clean with water to remove soap residue. Three (3) Year Limited Warranty 4 8 Fisher-Price, Inc., 636 Girard Avenue, East Aurora, New York 14052, warrant