ページ1に含まれる内容の要旨
Grow-With-Me Trike
Model Number: 72667
Instructions
Please keep these instructions for future reference.
Adult assembly is required.
Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood.
If you have any questions about this product, or are missing a part, please call us toll-free
at 1-800-432-KIDS, rather than return this product to the store.
Age: 2 - 6 years.
Weight Limit: 60 lbs.
ページ2に含まれる内容の要旨
WARNING Message to Parents ® • Adult supervision is required. Thank you for purchasing the Fisher-Price Grow-With-Me Trike for your child. The Grow-With-Me Trike starts off as a • Never use near steps, sloped driveways, hills, regular tricycle for the youngest riders and then converts to a ditches, roadways, alleys, swimming pool low rider as your child grows. areas or other bodies of water. The Grow-With-Me Trike requires adult assembly. Please set aside at least 30 minutes for assembly. Please
ページ3に含まれる内容の要旨
Parts • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • If you are missing a part, please call us toll-free at 1-800-432-KIDS, rather than return this product to the store. • Please wipe each part with a clean, dry cloth before assembly. 11 9 10 12 14 6 7 13 13 7 8 15 5 16 5 3 4 2 4 1 17 2 Illustration Illustration Number Part Description Quantity Number Part Description Quantity 1 Front Wheel 1 11 Seat 1 2 Pedal Hub 4 12 Seat Retainer 1 3 P
ページ4に含まれる内容の要旨
Assembly 1 3 Frame Axle Hole Axle Hole Straight Axle Straight Axle Cap Nut • Turn the frame upside down. • Insert the straight axle through the axle holes in the rear of the frame. Cap Nut Assembly Tool 4 Indented Cap Nut Side Up • Place a scrap block of wood on a flat surface. Hubcap • Fit a cap nut into the cap nut assembly tool. • Place one end of the straight axle into the cap nut. Rear Wheel • Tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to the
ページ5に含まれる内容の要旨
Assembly 9 5 Pedal Hub Metal Tab Pedal Hubs Pedal Axle Metal Tab Slot Pedal Hub • Push the pedal hubs in until they are flush with the surface of the front wheel. • Place two pedal hubs on the pedal axle so that the metal tabs on the pedal axle fit into the slots inside each pedal hub. 10 Lock Washer 6 Pedal Hubs Raised Tabs Pedal Axle Pedal Slot Front Wheel Rectangular Hole Closed End • While holding the pedal hubs on the pedal axle, insert the assembly into the rectangular hole in the front w
ページ6に含まれる内容の要旨
Assembly 12 14 Fork Arms Gas Cap Pedal Axle Cover Groove 3 Pedal Axle #8 x /4" Screw – 4 SHOWN ACTUAL SIZE • Place the front wheel assembly between the fork arms so that the pedal axle fits into the groove at the bottom of • Insert and snap the gas cap into the hole in the frame. each fork arm. • Place a pedal axle cover over the pedal axle on one fork arm. 15 3 Seat Retainer • Insert two #8 x /4" screws into the pedal axle cover and tighten with a Phillips screwdriver. Do not over-tighten.
ページ7に含まれる内容の要旨
Label Decoration Attaching the Seat Helpful Hint: The seat can be attached to the frame in any of three positions, depending on the size of your child. 1 Check your child’s fit on the Grow-With-Me Trike by observ- ing the seat to pedal distance, as it is being ridden. If the pedals seem too far away or too close for your child, move 2 the seat up or down. 5 4 Seat Tabs Seat Retainer 3 6 6 Proper label application will help to keep the labels looking their best! • Wash your hands before applying
ページ8に含まれる内容の要旨
Removing the Seat Maintenance • Check the plastic parts regularly and if broken or cracked, Seat dispose of them properly. • Check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. • To clean the Grow-With-Me Trike, use a mild soap and water solution and a clean cloth. Rinse clean with water to remove soap residue. Seat Retainer Tab Frame Seat Retainer Tab • Turn the frame on it’s side. • Squeeze the seat retainer tabs toward one anothe
