ページ1に含まれる内容の要旨
® ®
CUS C CUST USTO TO OM EDITION M EDITIO M EDITION
Please read this manual and save it Please read this manual and save it Please read this manual and save it
with your original sales receipt. with your original sales receipt. with your original sales receipt.
T T Tools needed for assembly: Phillips Screwdriver o ools needed for assembly: Phillips Screwdriver ols needed for assembly: Phillips Screwdriver
(not included); (not included); (not included); A Assembly Assembly ssembly T T To ool
ページ2に含まれる内容の要旨
T TA ABLE OF CONTENTS BLE OF CONTENTS A A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 B Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 C Parts . . . . . . . . . . . . .
ページ3に含まれる内容の要旨
WARNINGS AND CAUTIONS B ELECTRICAL HAZARD WARNING Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. PREVENT FIRE - Ne ver modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type batter y or charger could cause a fire or explosion resulting in serious injury. ® ® - Use of P ower Wheels components in products other than Power Wheels vehicles could
ページ4に含まれる内容の要旨
PARTS C If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. 2 Doors (Left and Right) Vehicle Seat Front End Windshield/Dash Bumper Hood Grille 4 H0440pr-0920 H4433pr-0920
ページ5に含まれる内容の要旨
PARTS C Steering Column 2 Front Wheels (Left and Right) Steering Wheel 2 Wheel Covers Speaker Box Assembly 2 Wings (Left and Right) 2 Headlights (Left and Right) 2 Door Plates 2 Bushings 2 Hubcaps 2 Taillights (Left and Right) H0440pr-0920 5
ページ6に含まれる内容の要旨
PARTS C 12 Volt Battery 2 Short Seat Belts 12 Volt Charger 7 3 / " Washer – 2 / " -16 Lock Nut – 2 16 8 Long Seat Belt 3 #8-32 Lock Nut – 1 #8-32 x / " Screw – 1 4 1 3 #6 x 1 / " Screw – 1 #8 x / " Screw – 36 2 4 Assembly Tool 1 1 / x 1 / " Screw – 2 4 4 For your convenience, we included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. Key Assembly Fasteners Shown Actual Size 6 H0440pr-0920
ページ7に含まれる内容の要旨
PARTS DIAGRAM D Note: Some parts shown are assembled on both sides of the vehicle. 11 11 10 12 19 13 25 8 20 22 7 9 2 6 1 18 17 3 14 16 15 21 4 5 23 26 24 Parts Not Shown 1 Vehicle 10 Seat 19 Speaker Box Assembly 3 1 1 2 Front End 11 Short Seat Belts - 2 20 Steering Wheel / "-16 Lock Nuts - 2 / " x 1 / " Screws - 2 8 4 4 3 3 3 Bumper 12 Long Seat Belt 21 Steering Column #8-32 x / " Screw - 1 #8 x / " Screws - 36 4 4 4 Grille 13 Wings - 2 22 Taillight - 2 #8-32 Lock Nut - 1 Label Sheet 1 5
ページ8に含まれる内容の要旨
BATTERY CHARGING E ELECTRICAL HAZARD CAUTION WARNING Battery can fall out and injure a child Use the charger in dry locations only. if vehicle tips over. Always use battery retainer. About Thermal Fuses PREVENT FIRE Your Power Wheels 12 volt battery is equipped with a built-in - Never modify the electrical system. thermal fuse. The thermal fuse is a self-resetting safety device which Alterations could cause a fire resulting automatically “trips” and shuts down operation of the vehicl
ページ9に含まれる内容の要旨
BATTERY CHARGING ASSEMBLY E F WARNING Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical B Battery items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. A Charger Connector A Plug the charger connector into the battery . B Plug the charger into a standard wall outlet . Note: If power flow to the wall outle
ページ10に含まれる内容の要旨
ASSEMBLY F 3 /8" -16 Lock Nut Front Axle Front Wheel 4 Assembly Tool 2 3 Place a /8" -16 lock nut (rounded side out) onto a front axle. Hint: There is a right and a left front wheel. Place the right wheel IMPORTANT: Tighten the lock nut firmly using the closed end of the (marked R) on the passenger side of the vehicle, and the left wheel assembly tool. (marked L) on the driver side of the vehicle. Repeat this procedure to fasten the other front wheel assembly with Place a front wheel o
ページ11に含まれる内容の要旨
ASSEMBLY F Front End Battery Compartment 8 TOP VIEW Vehicle 1 1 " " Insert two /4 x 1 /4 screws inside of the battery compartment and into the front end of the vehicle. Tighten the screws. 6 Fit the front end onto the vehicle. Insert the tabs on the back edge of the front end into the slots in the vehicle. Front End Front End Bumper 9 RIGHT SIDE VIEW Fit the bumper onto the front end. 7 3 " Insert two #8 x /4 screws through the front end and into the vehicle. Tighten the screws. H0
ページ12に含まれる内容の要旨
ASSEMBLY F Bumper 10 Grille 3 " Insert seven #8 x /4 screws into the bumper and tighten. 12 3 " Insert two #8 x /4 screws the top of the grille. Tighten the screws. Grille 25 Bumper 24 11 13 Fit the grille onto the bumper. Push down to fit the tabs on the grille into the slots in the bumper. Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. Place the labels exactly as shown in the illustration. For best results, avoid
ページ13に含まれる内容の要旨
ASSEMBLY F Doors Headlights 14 16 Fit the headlights (left and right) onto the bumper. Fit the door pegs onto the holes near the front end of the vehicle. Hint: There is a left and right door. They are designed to be assembled one way. Plates Headlights 15 3 " Insert two #8 x /4 screws into the top edge of each headlight. Tighten the screws. 17 Fit the large hole on the plates to the door posts. Align the holes in the plates with the holes in the top side of the vehicle. H0440pr-0920
ページ14に含まれる内容の要旨
ASSEMBLY F Windshield/Dash Dash Connectors Radio Connectors 18 20 3 " Insert three #8 x /4 screws into each plate and tighten. Open the doors on the vehicle. Place the windshield/dash on top of the front end of the vehicle. Plug both dash connectors together. Plug both radio connectors together. Motor Harness Hint: If the connectors do not fit together, do not force them. Simply Connector Dash turn one of them over and try again! Connector Front Windshield/ Dash Radio Connector 1
ページ15に含まれる内容の要旨
ASSEMBLY F A B Steering Metal Vehicle Column Bar Hole Hole 22 24 BOTTOM VIEW 3 " Insert four #8 x /4 screws into the base of the windshield/dash. Tighten the screws. Turn the vehicle over. Wipe the steering column with a paper towel to remove any excess lubricant. First, insert the straight end of the steering column down through the hole in the metal bar A ; then through the hole in the vehicle Dash floor B ; and finally, out through the hole in the dash. Steering Column Steering
ページ16に含まれる内容の要旨
ASSEMBLY F Assembly Tool 26 28 DASH VIEW 3 " Insert a #8-32 x / screw through the hole in the end of the 4 steering column. 1 " Insert a #6 x 1 /2 screw into the hole in the base of the steering Attach a #8-32 lock nut (rounded side out) on the end of the screw. wheel. Tighten the screw. While holding the lock nut with the open end of the assembly tool, tighten the screw with a Phillips screwdriver. Turn the vehicle upright. Steering Wheel Steering Column Key Assembly 29 27 BACK
ページ17に含まれる内容の要旨
ASSEMBLY F Hood Loosen These Screws DASH VIEW Locate the FM Radio/Simulated CD Player/Digital Clock on the dash. Loosen both screws in the battery compartment door. Remove the battery compartment door. Insert four, new "C" (LR14) alkaline batteries. 30 Hint: We recommend using alkaline batteries for longer life. Replace the battery compartment door and tighten the screws. Fit the long tabs on the hood into the slots in the front end of When sounds become faint or stop, it’s time
ページ18に含まれる内容の要旨
ASSEMBLY F TOP VIEW Seat Short Seat Belts Seat Long Seat Belt Slots 33 Insert the two tabs on the front edge of the seat into the slots in 32 the vehicle. Insert the fastener end of a short seat belt strap through the slot near the outer edge of the seat. Make sure the side of the seat belt with the fastener faces the outer edge of the seat. Pull the short seat belt strap completely through the slot until the last T-loop at the opposite end of the belt catches against the slot. Seat Yo
ページ19に含まれる内容の要旨
ASSEMBLY F Wings 11 12 35 Taillight Tabs Before applying the labels, wipe the surface of the vehicle with a 37 clean, dry cloth to remove any dust or oils. First apply the inside edge of a label to the back end of the Fit the wing tabs into the slots in the top edge near the rear of vehicle. Next, apply the outside edge of the label to the side of the vehicle. the vehicle. Then, smooth the center of the label. (The edges will Hints: overlap slightly.) There is a left and right wing. T
ページ20に含まれる内容の要旨
ASSEMBLY F Speaker Box Assembly Speaker Connector Speaker Connector 39 41 Position the speaker box assembly over the back end of the vehicle. Plug both speaker connectors together. 3 " Insert three #8 x /4 screws into the top of the speaker assembly. Hint: If the connectors do not fit together, do not force them. Simply Tighten the screws. turn one of them over and try again! Assembly is now complete. Speaker Box Assembly 40 Fit the speaker box assembly onto the vehicle. 20 H0440pr-092
