ページ1に含まれる内容の要旨
Please read this manual and save it with
your original sales receipt.
Tools needed for assembly: Phillips Screwdriver, Adjustable
Wrench (both not included) and Assembly Wrenches (included).
®
Use only with a Power Wheels Super 6 Volt Rechargeable
®
Battery with built in thermal fuse and a Power Wheels Super 6
Volt charger with A-style connector (both included).
Product features may vary
from the picture above.
Owner's Manual
with Assembly Instructions
For Model R1502
ページ2に含まれる内容の要旨
A TABLE OF CONTENTS TABLE OF CONTENTS Important Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Parts Picture . . . . . . . . . . . . . . . . . . . . .
ページ3に含まれる内容の要旨
IMPORTANT INFORMATION ELECTRICAL HAZARD DANGER • To prevent electric shock, do not immerse in water; wipe clean with a damp cloth. WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fi re resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fi re or explosion resulting in serious injury. ®
ページ4に含まれる内容の要旨
PARTS • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • Some parts were placed under the seat for shipment. Press the tab under the back of the seat and lift to access the battery compartment. • Metal parts have been coated with a lubricant to pr
ページ5に含まれる内容の要旨
A TABLE OF CONTENTS PARTS 3 /8" x 16 Lock Nut - 3 Super 6 Volt Battery Foam Spacer 7 /16" Washer - 8 6 Volt Charger Steering Column Cap #10 Lock Nut - 3 Steering Bushing 2 Round Bushings 3 3 #8 x /4" Screw - 1 #10 x /4" Screw - 1 2 Assembly Wrenches 1 #6 x 1" Screw - 6 #6 x /2" Screw - 2 Steering Column 5 #10 x 1 /8" Screw - 2 Note: Tighten and loosen all screws with a Phillips Rear Axle screwdriver. Do not over-tighten the screws. Part Not Shown: Label Sheet Fasteners Shown Actual Size R1502
ページ6に含まれる内容の要旨
A TP ABLE OF CONTENTS ARTS PICTURE Note: Some parts are assembled on both sides of the vehicle. This illustration shows assembly on right side only. 21 21 22 14 20 21 16 12 3 13 19 24 8 26 19 19 2 15 10 9 1 25 11 17 23 6 23 7 4 18 23 23 27 4 28 5 5 6 28 28 Wheel Cap Cover - 4 1 Vehicle 10 6 Volt Charger 19 #10 Lock Nut - 3 5 2 Cowling 11 Rear Wheel Driver - 2 20 #10 x 1 /8" Screw - 2 3 Seat 12 Grip - 2 21 #6 x 1" Screw - 6 Parts Not Shown 1 4 Wheel - 4 13 Handlebar Cover - Front 22 #6
ページ7に含まれる内容の要旨
BATTERY CHARGING ELECTRICAL HAZARD ELECTRICAL HAZARD WARNING CAUTION • Battery can fall out and injure a child if vehicle Use the charger in dry locations only. tips over. Always use battery retainer. • PREVENT FIRE - Never modify the electrical system. About Thermal Fuses Alterations could cause a fi re resulting ® Your Power Wheels 6 volt battery is equipped with a built-in in serious injury and could also ruin the thermal fuse. The thermal fuse is a self-resetting safety device which au
ページ8に含まれる内容の要旨
A BA TABLE OF CONTENTS TTERY CHARGING 1 • Plug the charger connector into the battery . 2 • Plug the charger into a standard volt wall outlet . Notes: - If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”. - Use the charger only in a wall outlet. Do not plug the charger into a ceiling outlet. 2 • Before first-time use, charge the battery for at least 18 hours. Never charge the battery longer than 30 hours. • Recharge the battery for at least 14 hours a
ページ9に含まれる内容の要旨
ASSEMBLY WARNING Rear Axle Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should Motor Assembly Pins not handle parts, including the battery, or help in assembly of the vehicle. Rear Axle Assembly 7 /16" Washer Rear Wheel Driver Motor Assembly Rib 2 Wheel • Position the vehicle upright. Face the back end of the vehicle. • Slide the rear ax
ページ10に含まれる内容の要旨
ASSEMBLY Ring End Assembly Front Axle Wrench Wheel 7 /16" Washer Hubcap 7 /16" Round Washer Bushing Rear Wheel 4 • Completely tighten the lock nut on the rear wheel assembly with the assembly wrenches. Lock Nut Hint: An extra wrench has been provided to hold the other lock nut in place while tightening the lock nut on the other side. Assembly • You may need the help of another adult to hold the vehicle Wrench while you tighten the lock nut. 6 • Remove the protective caps from each front a
ページ11に含まれる内容の要旨
ASSEMBLY Front Tabs Front Tabs PRESS HERE To Snap Side Tabs Cowling Side Tab Side Tab Shifter Handle Rear Tab 10 • Press firmly on each side of the cowling to snap the four side tabs into the slots in the vehicle. Make sure the rear tab stays aligned with the slot. Motor 8 Harness PRESS HERE • Press the tab under the back of the seat and lift to remove the seat. To Snap Rear Tab • Make sure the motor harness wires are positioned in the channel to prevent them from being pinched between t
ページ12に含まれる内容の要旨
ASSEMBLY Handlebar Steering Column Handlebar Neck Rounded #10 Lock Nuts 12 Side • Position the handlebar upright. • Fit the handlebar neck to the bottom of the handlebar. 5 " • Insert two #10 x 1 /8 screws down through the handlebar and Steering handlebar neck. Column Cap • Fit a #10 lock nut onto the ends of both screws. Make sure the 14 rounded side of the lock nut is down. • While holding a lock nut steady with an adjustable wrench • Fit the steering column cap on the curved end of th
ページ13に含まれる内容の要旨
ASSEMBLY Front Steering Handlebar Column Cover Handlebar Handlebar Assembly 16 18 • Fit the front handlebar cover into the front of the handlebar. Hint: You may want the help of another adult to support the steering column near the steering linkage while assembling the handlebar to the vehicle. • Fit the handlebar assembly onto the end of the steering column. Make sure the handlebar grip area points towards the rear of the vehicle. Back Handlebar #10 Lock Cover Nut 3 #10 x /4" Screw
ページ14に含まれる内容の要旨
DECORATION ASSEMBLY Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. • For best results, avoid repositioning a label once it has been applied to the vehicle. • After applying a label, rub th
ページ15に含まれる内容の要旨
DECORATION 4 13 8 2 6 11 8 RIGHT SIDE 3 1 14 12 7 8 2 11 8 5 LEFT SIDE R1502b-0920 R1502b-0920 15
ページ16に含まれる内容の要旨
BATTERY INSTALLATION ® IMPORTANT! Use only a Power Wheels 6 volt lead-acid rechargeable battery. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least ® 18 hours using the enclosed Power Wheels 6 volt charger before operating your vehicle for the first time. Charge the 6V Battery battery for at least 14 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Failure to follow these instructions may damage your ba
ページ17に含まれる内容の要旨
BATTERY CARE AND DISPOSAL Care Disposal If a battery leak develops, avoid contact with the leaking acid ® • Your Power Wheels battery is a non-spillable sealed lead-acid and place the damaged battery in a plastic bag. See information battery. It must be recycled or disposed of in an environmentally below for proper disposal. sound manner. If acid comes in contact with skin or eyes, flush with cool water • Do not dispose of a lead-acid battery in a fire. The battery may for at least 15 minu
ページ18に含まれる内容の要旨
SAFE DRIVING RULES Teach Safety Rules to Children RIDING HAZARD While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills WARNING are still very immature. Unsupervised driving by children can lead to serious injury. Before children use this vehicle, an adult should carefully evaluate the driving area as well as the children’s • Prevent Injuries and Deaths skill level and ability to drive this vehicle safely. Childre
ページ19に含まれる内容の要旨
VEHICLE OPERATION IMPORTANT! Use this vehicle ONLY outdoors. Most interior floor-ing can be damaged by riding this vehicle indoors. ® Fisher-Price will not be responsible for damage to the floor if the vehicle is used indoors. Shifter 2 Shifter IMPORTANT! To avoid damaging the motors and gears, make sure to stop the vehicle before switching from forward to reverse. • Move the shifter to the REVERSE position. • Press the foot pedal. The vehicle backs-up at a maximum 1 1 of 2 /2 mph. • Help
ページ20に含まれる内容の要旨
VEHICLE CARE LIMITED WARRANTY • Check all screws, lock nuts and their protective coverings regularly and tighten as required. Check plastic parts on Bumper-to-Bumper* a regular basis for cracks or broken pieces. Limited Warranty • During snowy or rainy weather, the vehicle should be stored inside or under a protective cover. Remember to charge the One year limited warranty from the date of battery at least once per month while your vehicle is not in ® purchase on the Power Wheels vehicle
