ページ1に含まれる内容の要旨
T6197
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required. Tools required for assembly:
Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).
Requires three "AA" batteries (included).
Age: 2-6 years.
Weight limit: 60 lbs (27 kg).
www.fi sher-price.com
ページ2に含まれる内容の要旨
Consumer Information WARNING CAUTION To avoid serious injury: This product contains small parts • Adult supervision is required. in its unassembled state. Adult assembly is required. • Never use near cars and other motor vehicles, near streets, steps, sloped driveways, hills, IMPORTANT! roadways, alleys, swimming pool areas or • Please save all packaging material until assembly is complete other bodies of water. to ensure that no parts are discarded. • Always wear shoes or sneakers. • Plea
ページ3に含まれる内容の要旨
Assembly Rear Wheel (Indented Side Up) Cap Nut Hubcap (Peg Side Down) Cover Straight Axle Frame Hubcap Rear Wheel (Indented Side Down) Hubcap (Peg Side Up) Assembled Rear Wheel Straight Axle Scrap Block Cap Nut of Wood 1 3 Assembly Tool • Turn the frame on its side with the exposed end of the • Slide a hubcap (peg side up) onto the straight axle. straight axle up. • Slide a rear wheel (indented side down) onto the • Place the cap nut assembly tool under the assembled rear straight axle. wheel
ページ4に含まれる内容の要旨
Assembly Pedal Hubs Pedal Pedal Axle Front Wheel Pedal Axle Hole 5 Scrap Block of Wood • While holding the pedal hubs on the pedal axle, insert the pedal axle through the hole in the center of the front wheel. 7 • Push the pedal hubs into the center of the front wheel until they are fl ush with the surface of the front wheel. • Fit the pedal on the pedal axle. Tap the pedal with a hammer until it is secure. • Pull the pedal up to be sure it is secure. If you can remove it, you have not secur
ページ5に含まれる内容の要旨
Assembly Handlebar Basket Mount Frame Neck Fork Post 11 Fork Cover Rear of Trike • Fit the basket mount onto the front of the handlebar. • Insert four #6 x ½ " screws into the holes and tighten. 9 • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels. • Place the handlebar onto the fork post and push it down onto the frame. Make sure the handlebar is positioned so that the screw hole faces the rear
ページ6に含まれる内容の要旨
Label Decoration Attaching the Seat Hint: The seat can be attached to the frame in any of three positions, depending on the size of your child. Check your child’s fi t on the trike by observing the seat to pedal distance, as it is being ridden. If the pedals seem too far away or too close for your child, move the seat up or down. (Place label 9 on opposite side) 12 8 (Place label 13 on Seat Tabs opposite side) 14 (Place label 15 on opposite side of seat) Seat 2 Retainer 6 10 (Place labe
ページ7に含まれる内容の要旨
Battery Replacement For best performance, we recommend replacing the batteries that Battery Compartment came with this trike with three, new alkaline "AA" (LR6) batteries. Basket 3 1,5V x 3 “AA” (LR6) 1 Hint: When sound or lights become faint or stop, it's time for an adult to replace the batteries. We recommend the • Loosen and remove the two screws in the basket. use of alkaline batteries for longer battery life. Remove the basket. • Loosen the screw in the battery compartment door. Open
ページ8に含まれる内容の要旨
Removing the Seat Consumer Information Seat CONSUMER ASSISTANCE 1-800-432-5437 (US & Canada) 1300 135 312 (Australia) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470. Seat Retainer Tab Outside the United States: Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com. Great Britain: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303. www.service.mattel.com/uk Mat
