ページ1に含まれる内容の要旨
J5242
Product features and decoration
may vary from the photograph.
Please keep this instruction sheet for
future reference, as it contains important information.
Adult assembly is required.
Requires three "AA" batteries (included).
Tools needed for assembly: Phillips Screwdriver, Hammer and
Scrap Block of Wood (not included).
Age: 2 - 6 years; Weight Limit: 60 lbs (27 kg).
www.fi sher-price.com
ページ2に含まれる内容の要旨
Parts IMPORTANT! CAUTION � Please save all packaging material until assembly is complete to ensure that no parts are discarded. This product contains small parts in its � If you are missing a part, please call toll-free unassembled state. Adult assembly is required. 1-800-432-5437, rather than return this product to the store. � Please wipe each part with a clean, dry cloth before assembly. � Some parts shown are assembled to both sides of the trike. 3 #8 x / " Screw – 6 4 Cap Nut – 2 Part Not
ページ3に含まれる内容の要旨
Assembly Rear Wheel (Indented Side Up) Cap Nut Hubcap Straight Axle (Peg Side Down) Straight Axle Cover Frame Cap Nut Rear Wheel (Indented Side Down) Cap Nut Hubcap Assembly Tool Hubcap (Peg Side Up) Scrap Block Assembled of Wood Rear Wheel Straight Axle Scrap Block Cap Nut of Wood 3 1 Assembly Tool BOTTOM VIEW � Fit a cap nut into the cap nut assembly tool. Place one end � Turn the frame on its side with the exposed end of the of the straight axle into the cap nut. straight axle up. � Tap th
ページ4に含まれる内容の要旨
Assembly Pedal Hubs Pedal Pedal Axle Front Wheel Pedal Axle Hole 5 Scrap Block of Wood • While holding the pedal hubs on the pedal axle, insert the 7 pedal axle through the hole in the center of the front wheel. • Push the pedal hubs into the center of the front wheel until � Fit a pedal on the pedal axle. Tap the pedal with a hammer they are flush with the surface of the front wheel. until it is secure. � Pull the pedal up to be sure it is secure. If you can remove it, you have not secured i
ページ5に含まれる内容の要旨
Assembly FIRST, Insert the 3 screw so that /4" is Handlebar Handlebar visible. THEN, tighten the screw. 3 /4" Frame Neck Fork Tab Post Basket Fork Cover Rear of Trike 9 11 � Fit the basket on the tab on the front of the handlebar. � Insert the fork post up through the hole in the neck of the 3 � Insert two #8 x /4" screws into the top of the basket frame. Make sure the fork is positioned so that the fork and tighten. covers face the rear wheels. � Place the handlebar onto the fork post and p
ページ6に含まれる内容の要旨
Label Decoration Attaching the Seat Helpful Hint: The seat can be attached to the frame in any (Place label 4 on of three positions, depending on the size of your child. Check opposite side) your child’s fit on the trike by observing the seat to pedal 3 (Place label 2 on distance, as it is being ridden. If the pedals seem too far 12 opposite side) away or too close for your child, move the seat up or down. 1 Seat Tabs 7 (Place label 6 on opposite side Seat of seat) Retainer 5 10 Slots (Pl
ページ7に含まれる内容の要旨
Removing the Seat Battery Replacement For best performance, we recommend replacing the batteries Seat that came with this trike with three, new alkaline "AA" (LR6) batteries. Basket Seat Retainer Tab Frame Seat Retainer Tab 1 � Loosen and remove the two screws in the basket. Remove � Turn the frame on its side. the basket. � Squeeze the seat retainer tabs toward one another and lift the seat from the frame. Battery Compartment Battery Safety Information In exceptional circumstances, batterie
ページ8に含まれる内容の要旨
Consumer Information Let's Go! WARNING To avoid serious injury: � Adult supervision is required. � Never use near cars and other motor vehicles, near streets, steps, sloped driveways, hills, roadways, alleys, swimming pools or other bodies of water. � Always wear shoes or sneakers. � Never allow more than one rider. Right Turn Left Turn Motorcycle Signal Signal Sounds Power � Check the plastic parts regularly and if broken or cracked, dispose of them properly. Check all fasteners regularl