ページ1に含まれる内容の要旨
72639c-0920 9/28/01 1:41 PM Page 1
™
Free Spirit Trike
Instructions
Model Number: 72639
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood (tools not included).
If you have any questions about this product, or are missing a part, please call us toll-free
at 1-800-432-KIDS, rather than return this product to the store.
Age: 2 - 5 years.
Weight L
ページ2に含まれる内容の要旨
72639c-0920 9/28/01 1:41 PM Page 2 WARNING CAUTION This product contains small parts • Adult supervision is required. in its unassembled state. • Never use near steps, sloped driveways, Adult assembly is required hills, roadways, alleys, swimming pools or other bodies of water. • Always wear shoes or sneakers. • Never allow more than one rider. Parts • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • If you are missing a part, please call
ページ3に含まれる内容の要旨
72639c-0920 9/28/01 1:41 PM Page 3 Assembly Frame 3 1 Hole Hole Straight Axle Straight Axle Bottom View • Turn the frame upside down. • Insert the straight axle through the holes in the rear of Cap Nut the frame. Scrap Block Rear Wheel 4 of Wood Indented Side Up Cap Nut Hubcap Peg • Place a cap nut on a scrap block of wood. Side Down • Place one end of the straight axle into the cap nut. • Tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to the Washe
ページ4に含まれる内容の要旨
72639c-0920 9/28/01 1:41 PM Page 4 Assembly Pedal Hub Pedal Axle 8 5 Pedal Axle Metal Tab Slot Pedal Hub Pedal Hub • Turn the front wheel assembly over. • Insert a pedal hub onto the top of the pedal axle and • Fit two pedal hubs onto the pedal axle metal tabs. Make into the hole in the center of the front wheel. sure the metal tabs fit into the slot in each pedal hub. • Insert the remaining pedal hub below the pedal axle and into the hole in the center of the front wheel. Pedal Hubs 6 Pedal
ページ5に含まれる内容の要旨
72639c-0920 9/28/01 1:41 PM Page 5 Assembly Fork Arms Pegs Front Wheel Assembly 11 13 Seat Fork Cover Holes Groove 3 #8 x /4" Screw – 4 Pedal Axle SHOWN ACTUAL SIZE • Place the front wheel assembly between the fork arms so that the pedal axle fits into the groove at the bottom of each fork arm. • Place a fork cover over the pedal axle on one fork arm. • At an angle, insert one peg on the back of the seat into 3 • Insert two #8 x /4" screws into the fork cover and the hole in the rear of the
ページ6に含まれる内容の要旨
72639c-0920 9/28/01 1:41 PM Page 6 Label Decoration Maintenance Proper label application will help to keep the labels • Check plastic parts regularly and if broken or cracked, looking their best! dispose of them properly. • Wash your hands before applying the labels. • Check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as neces- • Make sure the areas where the labels will be applied sary. are clean and dry. Wipe your vehicle with a clean, sof
