ページ1に含まれる内容の要旨
Parts Page Reorder No. PD01•85
Effective September, 2001
Supersedes PD99•14
Models:
.7 Hp/7°, 1/2" Drill
53080 – 3,400 RPM
53081 – 4,500 RPM Air Motor and Machine Parts
Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air
tools (ANSI B186.1) and any other applicable safety codes and regulations. Please refer to
Dynabrade’s Warning/Safety Operating Instructions for more complete safety information.
Index Key
1
No. Part # Description
1 53163 Hand
ページ2に含まれる内容の要旨
Important Operating, Maintenance and Safety Instructions ® Carefully read all instructions before operating or servicing any Dynabrade Abrasive Power Tool. Warning: Hand, wrist and arm injury may result from repetitive work motion and overexposure to vibration. Important: All Dynabrade Rotary Vane air tools must be used with a Filter-Regulator-Lubricator to maintain all warranties. Operating Instructions: Warning: Eye, face, respiratory, sound, and body protection must be worn while operating po
ページ3に含まれる内容の要旨
Disassembly/Assembly Instructions - .7 Hp Drill Important: Manufacturer’s warranty is void if tool is disassembled before warranty expires. Please refer to parts breakdown for part identification. Motor Disassembly: 1. Disconnect tool from power source. Remove chuck from spindle. 2. Secure motor housing using padded vise with motor spindle facing upwards. 3. Using an adjustable pin wrench, remove 13432 Spindle Cover. 4. Remove 04014 Set Screw from housing. 5. Pull 53181 Spindle and planetary car
ページ4に含まれる内容の要旨
Disassembly/Assembly Instructions (continued) 7. Slip 94523 Inlet Adapter through muffler assembly and install 95711 Retainer Ring into groove on inlet adapter. 8. Install air control ring into housing. ® 9. Apply Loctite #567 to threads of 94523 Inlet Adapter and install entire muffler assembly onto housing inlet (torque 23.0 N•m/200 in. - lbs.). 10. Replace air fitting. Secure inlet adapter with a wrench before tightening air fitting. 11. Install throttle lever and 01017 Pin. Tool Assembly Com
