ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
SAFETy SETUp OpERATION MAINTENANcE Table of contents Safety ......................................................... 2 Maintenance .............................................. 10 Specifications ............................................. 8 Parts List and Diagram .............................. 11 Setup .......................................................... 8 Warranty .................................................... 12 Operation .................................................... 9 W
ページ3に含まれる内容の要旨
Electrical safety 1. power tool plugs must match the outlet. 4. Do not abuse the cord. Never use the cord for Never modify the plug in any way. carrying, pulling or unplugging the power tool. Do not use any adapter plugs with grounded Keep cord away from heat, oil, sharp edges power tools. Unmodified plugs and matching or moving parts. Damaged or entangled outlets will reduce risk of electric shock. cords increase the risk of electric shock. 2. Avoid body contact with grounded surfaces
ページ4に含まれる内容の要旨
SAFETy SETUp OpERATION MAINTENANcE power tool use and care 1. Do not force the power tool. Use the 5. Maintain power tools. check for misalignment correct power tool for your application. or binding of moving parts, breakage of parts The correct power tool will do the job better and and any other condition that may affect the safer at the rate for which it was designed. power tool’s operation. If damaged, have the power tool repaired before use. Many accidents 2. Do not use the power t
ページ5に含まれる内容の要旨
9. WARNING: Some dust created by power sanding, 11. Take caution as some woods contain sawing, grinding, drilling, and other construction preservatives such as copper chromium activities, contains chemicals known [to the State arsenate (ccA) which can be toxic . When of California] to cause cancer, birth defects or cutting these materials extra care should be taken other reproductive harm. Some examples of to avoid inhalation and minimize skin contact. these chemicals are: 12. Exposure to
ページ6に含まれる内容の要旨
SAFETy SETUp OpERATION MAINTENANcE Grounding TO pREVENT ELEcTRIc SHOcK AND DEATH FROM INcORREcT GROUNDING WIRE cONNEcTION: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, h
ページ7に含まれる内容の要旨
Extension cords 1. Grounded tools require a three wire extension cord. 7. Make sure the extension cord is properly wired Double Insulated tools can use either and in good electrical condition. Always replace a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it. 2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. 8. Protect the extension cords from sharp objects, Using exte
ページ8に含まれる内容の要旨
SAFETy SETUp OpERATION MAINTENANcE Specifications Electrical Rating 120 VAC, 60 Hz, 2 A No Load Speed 12,000 Orbits Per Minute E194601 1 Dust Chute 1 / ″ OD 4 Sanding Pad Dimensions 3-5/8″ W x 7-3/8″ L x 1/4″ thick Setup - Before Use: Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Make sure that the Trigger is in the off-
ページ9に含まれる内容の要旨
Operating Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Make sure that the Trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section. Attaching Sandpaper to the Backing pad (28) 1. Press the tab on the clamp Wire (17) inward on
ページ10に含まれる内容の要旨
SAFETy SETUp OpERATION MAINTENANcE Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Make sure that the Trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section. TO pREVENT SERIOUS INJURy FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem
ページ11に含まれる内容の要旨
parts List and Diagram part Description Qty part Description Qty 1 Bottom enclosure 1 16 Gasket 1 2 Top enclosure 1 17 Clamp wire 1 3 Switch 1 18 Bearing 12x28x8 1 4 Stator 1 19 Ring 1 5 Rotor 1 20 Gasket 1 6 Rubber cylinder 4 21 Screw M5x8 1 7 Hold board 4 22 Pad 1 8 Brush holder 2 23 Cord anchorage 1 9 Carbon brush 2 24 Screw 2 10 Bearing 7x22x7 1 25 Cord guard 1 11 Bearing 9x26x8 1 26 Power cord and plug 1 12 Pin 1 27 Label 1 13 Balance fan 1 28 Screw ST4.2x20 8 14 Bottom board 1 29 Dust bag
ページ12に含まれる内容の要旨
pLEASE READ THE FOLLOWING cAREFULLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEM
