ページ1に含まれる内容の要旨
3/8” AIR ANGLE DRILL
Model 2439
ASSEMBLY and OPERATING
INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
© ®
Copyright 2002 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For
ページ2に含まれる内容の要旨
Specifications Air Inlet 1/4” - 18 NPT Maximum Air Pressure 90 PSI Air Consumption 4.5 SCFM Chuck Capacity 1/16” - 3/8” R Chuck Type Jacobs , 3-Jaw Key Weight 2.26 Lbs. No Load RPM 1800 Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Kee
ページ3に含まれる内容の要旨
8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. 9. Maintain tools with care. Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords and air hoses periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times. 10. Disconnect air supply. Disconne
ページ4に含まれる内容の要旨
Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be . understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known [to the State of California] to cause cancer,
ページ5に含まれる内容の要旨
Operation Note: This drill can be used to get into hard to reach places with it’s angular configuration. It may also be used just like a traditional drill. This drill does not have a reverse drive. Warning! Always disconnect the unit from the air compressor when changing bits. Warning! After drilling or driving screws, the bit will be extremely hot. Do not touch it until it has had ample time to cool down. 1. Insert the Chuck Key (44) into one of the holes in the Collet (41) and turn it
ページ6に含まれる内容の要旨
Parts List Part No. Description Qty. Part No. Description Qty. 1 Housing 1 26 Gear 1 2 Valve Bushing 1 27 Pin 2 3 Trigger 1 28 Hex Nut 1 4 Pin 1 29 Bushing 1 5 O-Ring 1 30 Bevel Gear 1 6 Valve Stem 2 31 Angle Head 1 7 Spring 1 32 Bearing 1 8 O-Ring 2 33 Work Spindle 1 9 Nut 1 34 Bevel Gear 1 10 Muffler Cover 1 35 Screw 1 11 Retaining Ring 1 36 Bearing 1 12 Air Inlet 1 37 Bushing 1 13 Bearing 1 38 Washer 1 14 End Plate 1 39 C-Ring 1 15
ページ7に含まれる内容の要旨
Assembly Drawing Page 7 SKU 2439
ページ8に含まれる内容の要旨
90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, norm
