ページ1に含まれる内容の要旨
74” Allied Snowblower
TABLE OF CONTENTS
DESCRIPTION PAGE
Warranty................................................................................1
Safety Instructions & Safety Sign Locations......................2
Operating Instructions ..........................................................3
Assembly Instructions ..........................................................4
74” Allied Sno
ページ2に含まれる内容の要旨
74” Allied Snowblower WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications. Buhler Manufacturing’s obligations under this warranty shall be limited to the repair or exchange,
ページ3に含まれる内容の要旨
74” Allied Snowblower This manual is for 74" snowblowers with an open gear gearbox. When ordering parts, specify model number and serial number. The snowblower is the push type and will mount to a tractor with a 540 rpm PTO. It is supplied with category 1 pins and also bushings, which convert the pins to a category 2. A category 1 Quick Hitch also fits on this snowblower. This 74" wide snowblower come
ページ4に含まれる内容の要旨
74” Allied Snowblower OPERATING INSTRUCTIONS 1. Do not operate the blower in the fully raised position. The three-point hitch on some tractors raises high enough to cause the PTO shaft to bind. This can cause damage to the PTO shaft and/or to the hitch and pins. ALERT: PTO shaft angle should not exceed 20 degrees for optimum performance and life. Damage may occur to PTO and/or snowbl
ページ5に含まれる内容の要旨
74” Allied Snowblower ASSEMBLY INSTRUCTIONS 1. Turn the bottom tube weldments (#9) as shown in drawing and slide them into the sleeve welded to the main body. These tubes have holes for two positions. The correct position for each individual tractor will be determined when mounting the snowblower on the tractor. These tubes are connected to the tractor with a ¾” x 4 ¼” pin (#96) and a hairpin clip (
ページ6に含まれる内容の要旨
74” Allied Snowblower ASSEMBLY INSTRUCTIONS – cont’d. 7. Mounting blower on tractor: a) Mount the blower on a tractor with a category 1 or category 2 hitch. b) Using tape or bright colored marking pen, mark on the outer shields the position where the shaft is completely pushed together and the position where you have a 4" overlap. Watch these marks when moving the blower through all possible ope
ページ7に含まれる内容の要旨
74” Allied Snowblower - 6 -
ページ8に含まれる内容の要旨
74” Allied Snowblower - 7 -
ページ9に含まれる内容の要旨
74” Allied Snowblower WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. 74" SNOWBLOWERS ITEM PART # DESCRIPTION 1 907241A Main Body 2 907244A Stand Weld't - 8" Tall 3 965294A Stand Pin
ページ10に含まれる内容の要旨
74” Allied Snowblower 36 37 901940 5/16'' x 1 1/4'' Key 38 965413A Drive Shaft 1 1/4'' x 37 1/4'' 39 936402 PTO Safety Chain 40 81527 1/4'' x 1'' Hex Bolt (pl) 41 84498 1/4'' Lock Nut (pl) 42 968627 1 1/2'' Bearing With Collar 43 967260 1 1/2'' Bearing Retainer (Set) 44 965822 Fan (Standard 3-Blade) 965447 Fan (Optional 4-Blade) 45 965414 Auger 46 965415A Drive Shaft Guard 47 907218A Hitch Tube We
ページ11に含まれる内容の要旨
74” Allied Snowblower 82 83 961012 #16 Hair Pin Clip 84 961658 1/4'' Cable Clamp 85 961876 1/2'' x 1 1/2'' Clevis Pin (pl) 86 902407 Skid Plate Weldment 87 9812487 1 1/4'' x 10ga Narrow Rim Washer (pl) 88 967110 1 1/4'' x 14ga Narrow Rim Washer (pl) 89 9812439 1 1/4'' x 18ga Narrow Rim Washer (pl) 90 967135 1 1/2'' x 10ga Narrow Rim Washer (pl) 91 9812444 1 1/2'' x 14ga Narrow Rim Washer 92 9812443
ページ12に含まれる内容の要旨
74” Allied Snowblower ALLIED SNOWBLOWER PTO - 11 -
ページ13に含まれる内容の要旨
74” Allied Snowblower SNOWBLOWER PTO (STANDARD) Item # Part # Description F842 Shaft Complete 936263 Tractor Half of PTO (Shear) 936264 Implement Half of PTO (Clamp Yoke) 1 936277 Shear Assembly 2 936199 Safety Slide Lock Repair Kit (Collar, Spring, Ret. Ring, 2-Pawls) 3 936249 Shear Assembly Repair Kit (3/8'' x 1/2'' Bolt, Lube, Blank, 31 - 1/4'' Balls) 4 903296 Shear Bolt - 5/16" x
ページ14に含まれる内容の要旨
74” Allied Snowblower SNOWBLOWER PTO (OPTIONAL LONG) Item # Part # Description F844 Shaft Complete 936285 Tractor Half of PTO (Shear) 936280 Implement Half of PTO (Clamp Yoke) 1 936277 Shear Assembly 2 936199 Safety Slide Lock Repair Kit (Collar, Spring, Ret. Ring, 2-Pawls) 3 936249 Shear Assembly Repair Kit (3/8'' x 1/2'' Bolt, Lube, Blank, 31-1/4'' Balls) *4 903296 Shear
ページ15に含まれる内容の要旨
74” Allied Snowblower 1.75 X 5 CYLINDER ASSEMBLY Item # Part # Description 24930 Cyl Complete 1 115367 Tube Weldt 2 112104 Shaft Weldt 1.0 Dia 3 X2669 Seal Kit 3.5 x 8 CYLINDER ASSEMBLY Item # Part # Description 24803 Cyl Complete 1 24804 Tube Weldt 2 113934 Piston Rod 1.5 Dia 3 X2098 Seal Kit - 14 -
ページ16に含まれる内容の要旨
74” Allied Snowblower 74” ALLIED SNOWBLOWER BUNDLES QUANTITY BUNDLE NO. DESCRIPTION 74” Snowblower w/hydraulic chute control, 3-blade fan-YC7420 1 F0460 Body Assembly 1 F0570 Hitch 74” Snowblower w/hydraulic chute control, 4-blade fan – YC7420-4 1 F0461 Body Assembly 1 F0570 Hitch OPTIONS AVAILABLE: F844 36” Optional Long PTO F842 Standard PTO
