ページ1に含まれる内容の要旨
Framing Nailer
Operating Instructions and Parts Manual
CHN70800
Fa r na ç ie s : P age 21
es Pa:loñ Página 41
IN727700AV 8/10
© 2010 Campbell Hausfeld/Scott Fetzer
MAKES IT EASY TO DO IT LIKE A PRO chpower.com
ページ2に含まれる内容の要旨
Table of Contents Description . . . . . . . . . . . . . . . . . . . . . . . . . 3 Air Hose Requirements. . . . . . . . . . . . 10 Specifications . . . . . . . . . . . . . . . . . . . . . . . 3 Loading / Unloading The Nailer . . . . 11 Safety Guidelines . . . . . . . . . . . . . . . . . . . . 4 Loading the Nailer . . . . . . . . . . . . . . 11 Safety Symbols . . . . . . . . . . . . . . . . . . . . . . 4 Unloading the Nailer . . . . . . . . . . . . 11 Important Safety Information . . . . . . . . 4
ページ3に含まれる内容の要旨
Operating Instructions and Parts Manual Framing Nailer Description This nailer is designed for framing, trusses, sub-floors, sheathing, exterior decks, and Specifications pallet/create assembly. Features include: convenient rear loading magazine which holds up to 100 nails, tethered no-mar decking tip, quick clear nose, an adjustable Model CHN70800 depth of drive mechanism, oil free, electronic low nail indicator, nail placement laser pointer, in-line magazine, bubble level, anti-dry fire, c
ページ4に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Important Safety Information Safety Guidelines INstru Ct IoNs Perta ININg to a rI sk o F FIre, ele Ctr IC sHoCk, or INjury to Perso Ns This manual contains information that is very This manual contains important safety, operational and maintenance information. If important to know and you have any questions, please call 1-800-543-6400 for customer assistance. understand. This information When using tools, basic precautions should always be
ページ5に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Important Safety Information (Continued) Perso Nal saFety This is a Class IIIA a. Stay alert. Watch what you are doing and use common Laser Product that laser sense when operating the tool. Do not use the tool radiation while tired or under the influence of drugs, alcohol, or h. Never look directly into medication. A moment of inattention while operating the the laser beam or its tool increases the risk of injury to persons. direc
ページ6に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Important Safety Information (Continued) e. Always work in a well-ventilated area. Wear OSHA- m. The product will emit a laser beam from the aperture. approved dust mask. The users of the product shall be limited to professional operators. In normal operation and maintenance Always disconnect the tool from the power conditions, the operators shall wear protective eyewear to source when unattended, performing any maintenance or repair, cl
ページ7に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Important Safety Information (Continued) Unpacking serv ICe After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Check for loose, missing a. Tool service must be performed only by qualified repair or damaged parts. Make sure to tighten fittings, bolts, etc., personnel. before putting unit into service. Check to be sure all supplied b. When servicing a tool, use only identical replacement acce
ページ8に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Glossary Become familiar with these terms before operating the unit. ACTUATE (TOOL) — To cause movement to the tool’s component(s) intended to drive the fastener. ACTUATION SYSTEM — The use of a trigger, work contact element (WCE) and/ or other operating control, separately or in combination or sequence, to actuate the tool. AIR INLET — The opening in which the compressed air supply is connected, Figure 3 - Quick Coupler usually by means of
ページ9に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Getting To Know Your Framing Nailer Like A Pro Work Features Electronics Bubble Contact Conversion Switch ON / OFF Level Element aNt I-dry F Ire Switch (WCE) Tethered This tool is equipped with an Anti-Dry No-mar Fire feature. This prevents the Work Decking Tip Adjustable Contact Element (WCE) from being Exhaust pushed in when only a few nails remain. Deflecter Simply load new nail clip behind Quick Clear remaining nails to continue
ページ10に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Set-Up l uBr ICat IoN 70 psi Minimum This nailer requires NO lubrication for normal operation. However, lubrication will NOT harm the tool. 120 psi Maximum The work surface can become damaged by excessive lubrication. Chart 1 MINIMuM CoMPoNeNts r eQuIred For Hook-u P AIR COMPRESSOR: The air compressor must be able to maintain a minimum of 70 psi when the nailer is being used. An inadequate air supply can cause a loss of power and Rated 150
ページ11に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Set-Up (Continued) l oad INg / uNload INg tH e Na Iler Always disconnect the tool from the air supply before loading / unloading fasteners. Choose which type of fastener you want to use for you project. Additional fasteners can be found at major home centers. l oading the tool 1. Load strips of fasteners into the slot in the rear of the magazine. Make sure that the nails are placed into tool at the proper orientation. 2. Press pusher bypass but
ページ12に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Set-Up (Continued) adjust INg tH e dIre Ct IoN oF t He ex Haust The CHN70800 is equipped with an adjustable direction exhaust deflector. This is intended to allow the user to change the direction of the exhaust. Simply twist the deflector to any direction desired. INstall INg No-Mar tIP 1. Disconnect air supply from nailer. Figure 13 - exhaust adjustment 2. Remove no-mar tip from storage post. 3. Remove retaining ring from no-mar tip. 4. Careful
ページ13に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Pre-Operation (Continued) Bump Mode Pull trigger first... This method is recommended when less precise nail placement is required. Operation in this mode requires the trigger to be depressed with nailer off of the work surface. Then, the nose of the nailer is tapped against the work surface causing a nail to be driven. Each time the Work Contact Element is depressed, a nail is driven into the work surface. Extreme care should be taken because
ページ14に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Operation NaIl Pla CeMeNt l aser Po INter The tool is equipped with a laser mounted near the nose. Turn the electronics switch to the ON position. When the Work Contact Element (WCE) touches the workpiece and slightly moves, the laser will shine on the spot where the nail will be driven. This can be seen through the wide slots in the WCE and / or no-mar tip. When the laser is in the desired location, simply fully press in the WCE and fire the
ページ15に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Storage The nailer should be stored in a cool dry location. Maintenance Clear INg a j aM Fro M tH e Na Iler 1. Disconnect nailer from air supply. 2. Remove all nails from the magazine (See Loading/ Unloading). 3. Press down on the Quick-Clear Nose (QCN) lever to disengage portion of nose barrel (See Figure 24). 4. If necessary, use small hand tools to help free the jammed nail. Sometimes it is necessary to use a hammer and a long, thin screwdr
ページ16に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Maintenance (Continued) t eCHNICal serv ICe For information regarding the operation or repair of this product, please call 1-800-543-6400. Faste Ner I Nter CHaNge I NFor Mat IoN This tool drives most brands of paper-collated, framing nails with these specifications: u 31° to 34° D-clipped head u Length: 2 inch to 3-1/2 inch long u Shank diameter: 0.113 inch to 0.131 inch 16 www.chpower.com
ページ17に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Troubleshooting Guide Stop using nailer immediately if any of the following problems occur. Serious personal injury could result. Any repairs or replacements must be done by a Qualified Service Person or Authorized Service Center. SYMPTOM CAUSe SOLUTION Air leaking at trigger valve O-rings in trigger valve housing are Replace O-rings. Check operation of Work Contact damaged Element (WCE) Air leaking between housing 1. Damaged O-rings and / or
ページ18に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 For Replacement Parts or Technical Assistance, Call 1-800-543-6400 Please provide following information: Address any correspondence to: - Model number Campbell Hausfeld - Serial number (if any) Attn: Customer Service - Part description and number as shown in parts list 100 Production Drive Harrison, OH 45030 U.S.A. 18 107 106 1 105 19 2 104 20 103 3 21 4 22 15 5 31 6 17 67 23 61 7 62 55 50 68 56 63 24 8 32 57 64 45 9 58 71 33 12 52 46 59 65
ページ19に含まれる内容の要旨
Operating Instructions and Parts Manual CHN70800 Replacement Parts List for Framing Nailer ref. Part ref. Part No. description No. Qty. No. description No. Qty. 1 Socket head cap screw - M6 x 20 k 1 66 Spring pin 1 2 Bushing — 1 67 Spring 1 3 Exhaust cover — 1 68 Trigger assembly 1 4 Seal n 1 69 Quick clear nose (QCN) door — 1 5 Washer n 1 70 Spring pin — 1 6 Bubble level s 1 71 Spring pin 1 7 Socket head cap screw - M6 x 30 k 4 72 Socket head cap screw - M6 x 16 — 1 8 Washer -
ページ20に含まれる内容の要旨
Operating Instructions and Parts Manual Reminder: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. Limited Warranty 1. DURATION: From the date of purchase by the original purchaser as follows: One (1) Year. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Telephone: (800) 543-6400 3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other t
