Bosch Appliances VJR-A3-SPの取扱説明書

ページ1に含まれる内容の要旨

VJR-A3-SP Support Bracket
VJR-A3-SP
en Installation Guide

ページ2に含まれる内容の要旨

ページ3に含まれる内容の要旨

4 en | VJR-A3-SP In-ceiling Support Bracket Installation Guide VJR-A3-SP Support Bracket 1 VJR-A3-SP In-ceiling Support Bracket Installation Guide 1.1 Important Safety Instructions Read, follow, and retain all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operation. 1. Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners. 2. Do not install unit near any heat sources such as radiators, heaters, stoves, or othe

ページ4に含まれる内容の要旨

VJR-A3-SP Support Bracket Installing the VJR-A3-SP Support Bracket | en 5 2 Installing the VJR-A3-SP Support Bracket To secure the VJR-A3-SP kit to a suspended ceiling: 1. Locate the bracket assembly at the desired location. Loosen the securing screws on the base bracket assembly (refer to Figure 2.3) enough to retain the suspension bars during handling, but allowing adjustment during installation. Figure 2.1 Ceiling Mounting (Top View) 1 Ceiling Tile 2 Suspension Bars 3 Ceiling Base Bracket 4

ページ5に含まれる内容の要旨

6 en | Installing the VJR-A3-SP Support Bracket VJR-A3-SP Support Bracket 3. Tighten the four (4) bracket securing screws located in each corner. Figure 2.3 Bracket Securing Screws 4. Secure the bracket assembly to an overhead securing point using a user-supplied safety cable. Figure 2.4 Safety Cable Fitment 5. Use two (2) pencils (or a pencil and nail) and the template tool to trace a 200 mm diamter hole with a tolerance of ±2.2 mm (7.8 in. ± 1/8 in.) in the center of the mounting plate. 6.

ページ6に含まれる内容の要旨

ページ7に含まれる内容の要旨

ページ8に含まれる内容の要旨

Bosch Security Systems, Inc. www.boschsecurity.com © Bosch Security Systems, Inc., 2010