ページ1に含まれる内容の要旨
Other favourable features include EL back-light, indoor temperature
RADIO-CONTROLLED PROJECTION
display, hourly-chime function, and user-selectable daily beep alarm
CLOCK WITH DIGITAL TUNING
with 8-minute snooze function or Wake-up-to-Radio Alarm.
AM/FM RADIO
MODEL NO.: RRM968P/RRM968PU
KEY CONFIGURATION & FEATURES
INSTRUCTION MANUAL FRONT VIEW
INTRODUCTION
Congratulations on your purchasing the Radio-controlled projection
Clock with digital tuning AM/FM radio RRM968P/RRM968PU.
The unit is a mul
ページ2に含まれる内容の要旨
- Press to increase/ decrease the values in setting modes A2. [ ] Battery-low indicator - Press and hold for 2 seconds to activate/ deactivate the auto- - Displays when battery power of clock is low reception of RF clock radio signal (When Radio is Off) A3. [ ] Battery-low indicator TOP VIEW - Displays when battery power of radio is low A4. [ ] Radio-reception icon - Indicates the strength of the reception of clock radio signal A5. [RADIO] BUTTON - Press to turn on or off the radio function A
ページ3に含まれる内容の要旨
SIDE VIEW PROJECTION UNIT D1. [180º ROTATION] BUTTON - Press to flip the projected image horizontally D2. [FOCUS] KNOB C1. [ALARM ON/OFF] BUTTON - Rotate to adjust the focus of projection - Press to turn on/off the alarm function D3. [IMAGE ROTATION] KNOB C2. [ALARM] BUTTON - Rotate to change the image 90º to the left or right - Press to display the alarm function - Press and hold for 2 seconds to enter the alarm-time setting mode C3. [PROJECTION ON ] BUTTON - Slide to enable/disable continuous
ページ4に含まれる内容の要旨
BACK VIEW BATTERY INSTALLATION This unit can be operated by batteries or AC power alone as well as both together. Using Battery E1. BATTERY COMPARTMENT - Accommodates 4 pieces of UM-3 or AA 1.5 V batteries (2 pieces for clock function and 2 pieces for radio function) E2. EXTENDABLE ANTENNA - External antenna for FM radio E3. [RESET] BUTTON - Press to return all settings to default values E4. 4.5 V DC JACK WITH RUBBER COVER - For AC power adapter installation 4 RRM968PM_EN_R0 4 7/7/04, 11:0
ページ5に含まれる内容の要旨
Battery Installation: FEATURES 1. Remove the battery compartment door by rotating it to the direction of “ ” as shown Section I — Radio-Controlled Calendar 2. Insert four pieces of UM-3 or AA 1.5V batteries in accordance Clock to the polarities. 3. Press [RESET]. ABOUT RADIO RECEPTION 4. Replace the battery compartment door by rotating it back onto After battery installation, the unit will automatically synchronize the unit by following the direction of “ ”. its time and date with the radio si
ページ6に含まれる内容の要旨
For best reception, place the unit away from other equipment that emit radio frequency or microwave signals such as TVs, radios, PCs or 3. Clock with Weekday microwave ovens. Other causes for signal interference include electrical ---------------------------------------------------------- power transmission tower and/or steel reinforced concrete construction. - Clock (2nd Zone-time)/Indoor Temperature HOW TO ENABLE OR DISABLE AUTO- 4. Clock with Weekday(2nd Zone-time) RECEPTION -----------------
ページ7に含まれる内容の要旨
(E), French (F), German (D), Italian (I) and Spanish (S). Language Day-of-the-week Affichage du jour Wochentaganzeige Giorno della settimana Día de la semana Dia de Semana Langues Sprache Monday Tuesday WednesdayThursday Friday Saturday Sunday DISPLAYING AND SETTING THE Lundi Mardi Mercredi Jeudi Vendredi Samedi Dimanche Lingue Montag Dienstag Mittwoch Donnerstag Freitag Samstag Sonntag ALARM Idiomas Lunedí Martedí Mercoledí Glovedí Venerdí Sabato Domenica Lunes Martes Miércoles Jueves Viernes S
ページ8に含まれる内容の要旨
using [VOL +] or [VOL -]. Press [ALARM] to confirm the each hour. You can activate or deactivate this function by setting entry and exit the setting mode. Press [RADIO] to turn off the this in the clock and calendar setting mode (please refer to Section radio. “SETTING THE CLOCK AND CALENDAR MANUALLY”). When the pre-set time arrives, beep sound / radio will be turned on. Section II - Digitally-tuned PLL AM/FM Press any key to stop the beep sound. The EL backlight and projection Radio will a
ページ9に含まれる内容の要旨
decreasing until a clear channel is found. Once this function is 3. Wait for about 5 seconds and the sleep function will be activated activated, you can release and stop pressing the button. automatically. HOW TO PROGRAM A PRESET Section III — Indoor Thermometer STATION DISPLAY OF INDOOR TEMPERATURE This unit allows you to program up to 8 FM and 8 AM radio stations in the memory. To do so: Once batteries are installed into the main unit, it will start to detect 1. First press [AM/FM] to select
ページ10に含まれる内容の要旨
2. To change to view the preset alarm time instead of the current slide the [ PROJECTION ON ] switch to the “off” position time, press [SNOOZE/LIGHT] again when projection is on. during daytime. Projector Features 3. Adjust the projected image as below. Feature Effect Instructions Section V — Others Adjustable Rotates the Tilt swivel projection Projection projection 180° housing to alter the BACKLIGHT direction of projection To turn on the EL backlight of the LCD Display, press [SN
ページ11に含まれる内容の要旨
4. Do not tamper with the unit’s internal components. Doing so will (i) Crescendo Beep Alarm with invalidate the warranty on the unit and may cause unnecessary damage. 8-minute Snooze function; or The unit contains no user-serviceable parts. (ii) Radio Alarm 5. Only use fresh batteries as specified in the user’s instructions. Digital - tuning Radio Do not mix new and old batteries as the old ones may leak. AM band Frequency : 531 – 1602 kHz 6. Always read the user’s instructions thoroughly befor
ページ12に含まれる内容の要旨
Additional information: ABOUT OREGON SCIENTIFIC The product herewith complies with the requirements of the Low Voltage Directive 73 / 23 / EC, the EMC Directive 89 / 336 / EC and Visit our website (www.oregonscientific.com) to learn more about carries the CE marking accordingly. Oregon Scientific products such as digital cameras; MP3 players; children's electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The web
ページ13に含まれる内容の要旨
TROUBLESHOOTING GUIDE - RRM968P/ RRM968PU Trouble Possible Cause Remedy Reception icon “Antenna” is not shown Auto-reception of clock radio signal has been Enable this function by following the disabled instructions in the User’s Manual Displayed Temperature data is different from other (1) The measurement method is different (1) Use the same instruments with measuring instruments consideration of the tolerance of readings (2) The area under evaluation is different or being influenced by climate
