ページ1に含まれる内容の要旨
Wireless Thermo-Hygro Clock
Model : RMR612HGA
User Manual
RMR612HGA lab test cover R2 1 1/8/04, 7:00 PM
ページ2に含まれる内容の要旨
Temperature and Humidity ...................................... 9 CONTENTS Select Temperature Unit ........................................ 9 Contents ................................................................... 1 Select Sensor Channel .......................................... 9 Introduction .............................................................. 2 Minimum / Maximum Records ............................. 10 About Oregon Scientific .......................................... 2 Temper
ページ3に含まれる内容の要旨
INTRODUCTION ABOUT OREGON SCIENTIFIC TM Thank you for selecting the Oregon Scientific Clock Visit our website (www.oregonscientific.com) to learn with Indoor / Outdoor Temperature and Humidity more about other Oregon Scientific products such as (RMR612HGA). This device bundles precise time digital cameras, hand-held organizers, health and fitness keeping, alarm, and temperature and humidity gear, and projection clocks. The website also includes monitoring features into a single tool you can use
ページ4に含まれる内容の要旨
PRODUCT OVERVIEW FRONT VIEW 1. SNOOZE button: Activate 8-minute snooze. 2. Humidity Area: Readings; trend line, remote unit reception and channel number 3. Clock / Alarm Area: Time, time zone, day of week, alarm, and Atomic Clock reception status 4. Temperature Area: Readings, trend line, and battery status 5. button: View alarm settings, activate alarm 3 RMR612HGA lab test R2 3 1/17/04, 4:58 PM EN
ページ5に含まれる内容の要旨
BACK VIEW 1. Wall mount 1 2. CHANNEL button: Switch remote sensor 3. MEM: View current, maximum and minimum temperature / humidity readings 4. Battery compartment 6 5. RESET hole (located in battery compartment) 7 2 6. MODE button: Change display / settings 8 3 7. : Increase setting, activate Atomic Clock signal reception 4 8. : Decrease setting 9. °C / °F switch (located in battery compartment) 10. ZONE: Switch time zones, deactivate Atomic Clock 5 9 signal reception (located in battery com
ページ6に含まれる内容の要旨
REMOTE SENSOR (THGR122NX) 1 1 2 2 3 4 1. LCD display 1. Wall mount hole 2. LED Status indicator 2. RESET 3. Channel number (1 - 3) 4. Battery compartment (Battery compartment cover not shown) 5 RMR612HGA lab test R2 5 1/17/04, 4:58 PM EN
ページ7に含まれる内容の要旨
GETTING STARTED REMOTE SENSOR (THGR122NX) BATTERIES This product is shipped with a THGR122NX Thermo/ Hygro Sensor that collects Temperature and Humidity Insert batteries before first use, matching the polarity as data. Data can be collected from up to 3 sensors. shown in the battery compartment. For best results, Additional sensors sold separately. install batteries in the remote sensor before the main unit. Press RESET after each battery change. SETUP SENSOR NOTE Do not use rechargeable batteri
ページ8に含まれる内容の要旨
For best results: DATA TRANSMISSION • Insert the batteries and select the channel and Data is sent from the sensor(s) every 40 seconds. temperature unit before you mount the sensor. The reception icon shown in the Temperature and Humidity Areas shows the status. • Place the sensor out of direct sunlight and moisture. ICON DESCRIPTION • Do not place the sensor more than 30 meters Main unit is searching for (98 feet) from the main (indoor) unit. sensors. • Position the sensor so that it faces the
ページ9に含まれる内容の要旨
SET CLOCK CLOCK You only need to do this if you have disabled the Atomic This product shows the current time, time zone, and day Clock feature (for example, if you are too far from or of week in English, Spanish, or French. The time is cannot receive a signal). automatically updated by the US Atomic Clock in Boulder, Colorado unless you disable this feature. Signals are collected by the main unit when it is within 1. Open the battery compartment. 1500 km (932 miles) of a signal. 2. Press ZONE re
ページ10に含まれる内容の要旨
ALARM TEMPERATURE AND HUMIDITY This product is equipped with a 2-minute crescendo alarm This product can display the following temperature and and 8-minute snooze. humidity information: VIEW ALARM SETTINGS • Current, minimum and maximum readings •Trend line Press . The Alarm Time and On/Off status will show in the Clock Area. Data is collected by the remote sensors and displayed every 40 seconds. SET ALARM 1. Press . SELECT TEMPERATURE UNIT 2. Press and hold again for 2 seconds. The Alarm
ページ11に含まれる内容の要旨
To auto-scan between sensors, press and hold RESET SYSTEM CHANNEL for 2 seconds. Each sensor's data will be The RESET buttons are located in the battery displayed for 3 seconds. To end auto-scan, press MEM compartments for the main unit and remote sensors. or CHANNEL. Press RESET when you change the batteries and whenever performance is not behaving as expected (for NOTE If you use a sensor that collects only example, unable to establish radio frequency link with temperature data, humidity will
ページ12に含まれる内容の要旨
WARNINGS TROUBLESHOOTING This product is designed to give you years of service if Check here before contacting our customer service handled properly. Observe the following guidelines: department. Problem Symptom Remedy • Never immerse the product in water. This can Calendar Strange date / Change language cause electrical shock and damage the product. month ( 9) • Do not subject the main unit to extreme force, Clock Cannot adjust Disable Atomic Clock shock, or fluctuations in temperature or hum
ページ13に含まれる内容の要旨
REMOTE SENSOR (THGR122NX) SPECIFICATIONS RF frequency 433 MHz MAIN UNIT DIMENSIONS Range 30 meters (98 feet) with no obstructions L x W x H 105 x 35 x 116 mm (4.13 x 1.38 x 4.57 inches) Transmission every 40 seconds Weight 198 grams (6.98 ounces) Channel No. 1 - 3 without batteries CLOCK REMOTE SENSOR DIMENSIONS Atomic Clock Auto or manual L x W x H 92 x 60 x 20 mm (disabled) (3.6 x 2.4 x 0.79 inches) Clock display HH:MM:SS Weight 63 grams (2.22 ounces) Hour format 12 hr AM/PM without battery T
ページ14に含まれる内容の要旨
• Reorient or relocate the receiving antenna. FCC STATEMENT • Increase the separation between the equipment This device complies with Part 15 of the FCC Rules. and receiver. Operation is subject to the following two conditions: • Connect the equipment into an outlet on a circuit (1) This device may not cause harmful interference, and different from that to which the receiver is (2) This device must accept any interference received, connected. including interference that may cause undesired opera
ページ15に含まれる内容の要旨
DECLARATION OF CONFORMITY is in conformity with Part 15 of the FCC Rules. Operation The information below is not to be used as contact for is subject to the following two conditions: support or sales. Please call our customer service number 1) This device may not cause harmful (listed on our website at www.oregonscientific.com, or on interference. the warranty card for this product) for all inquiries instead. 2) This device must accept any interference received, including interference that may W
ページ16に含まれる内容の要旨
© 2004 Oregon Scientific. All rights reserved. P/N.:086-003298-017 RMR612HGA lab test Back cover 1 12/29/03, 10:43 PM Black
