ページ1に含まれる内容の要旨
UK
Ireland
Australia
New Zealand
ページ2に含まれる内容の要旨
2
ページ3に含まれる内容の要旨
3
ページ4に含まれる内容の要旨
protected supply. Use of an RCD reduces the risk of Intended use electric shock. Your Black & Decker cordless three-position pivot drill/ screwdriver has been designed for drilling in wood, metal 3. Personal safety and plastics as well as for screwdriving purposes. This tool a. Stay alert, watch what you are doing and use is intended for consumer use only. common sense when operating a power tool. Do not use a power tool while you are tired or under the Safety instructions influence of dru
ページ5に含まれる内容の要旨
tool or these instructions to operate the power tool. Use auxiliary handles supplied with the tool. Loss of Power tools are dangerous in the hands of untrained control can cause personal injury. users. Hold power tool by insulated gripping surfaces when e. Maintain power tools. Check for misalignment or performing an operation where the fastener may binding of moving parts, breakage of parts and any contact hidden wiring or its own cord. Fasteners other condition that may affect the power
ページ6に含まれる内容の要旨
Labels on tools Features 1. Quick release collar 2. Speed selector switch Warning! To reduce the risk of injury, the user must 3. Torque adjust collar read the instruction manual. 4. Pivot lock release button Additional safety instructions for batteries and chargers 5. Battery release buttons (on battery) 6. Battery Batteries 7. On/off trigger switch Never attempt to open for any reason. 8. Forward/reverse and lock-off button Do not expose the battery to water. Do not expose the battery to h
ページ7に含まれる内容の要旨
thumb to press the pivot lock release button (4) when To install a drill bit or other accessory, pull the collar (1) back changing positions. and insert the bit into the collar until it locks into place. Do not use the screwdriver as a pry bar in any position. To remove a drill bit or other accessory, pull the collar (1) back. Remove the bit and release the collar. Switching on and off (fig. E) To switch the tool on, press the on/off trigger switch (7). Driving screws To switch the tool off
ページ8に含まれる内容の要旨
Your charger does not require any maintenance apart from Protecting the environment regular cleaning. Separate collection. This product must not be Warning! Before performing any maintenance on the tool, disposed of with normal household waste. remove the battery from the tool. Unplug the charger before cleaning it. Should you find one day that your Black & Decker product Regularly clean the ventilation slots in your tool and needs replacement, or if it is of no further use to you, do not
ページ9に含まれる内容の要旨
Technical data If a Black & Decker product becomes defective due to faulty HP362 materials, workmanship or lack of conformity, within 24 Voltage Vdc 3.6 months from the date of purchase, Black & Decker Output torque (max) Nm 6 guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to No load speed rpm 0-200, 0-600 make sure of the minimum inconvenience to the customer Bit holder mm 6.35 unless: Weight kg 0.48 The product has been u
ページ10に含まれる内容の要旨
10
ページ11に含まれる内容の要旨
11
ページ12に含まれる内容の要旨
90528103 12/07
