La Crosse Technology WT-8002Uの取扱説明書

ページ1に含まれる内容の要旨

Inventory of Contents


La Crosse Technology®
1. WT-8002 Clock

2. Mounting hardware
WT-8002U


3. Instruction manual
Digital Clock with Indoor Temperature

Features and Specifications

 Digital time and date
 12/24 hour time
 Indoor temperature (°F or °C) (32°F to 122°F
- 0°C to 50°C)
 Time alarm with snooze
 Calendar: month, date and weekday
 Wall hanging or free standing
 Battery: 1 X “AA” size 1.5V (not included)
 Battery life: Up to 24 months
 Dimension

ページ2に含まれる内容の要旨

5. Set Date - Month Install Battery Once the year is set, press the “SET” button again Insert 1 new "AA", 1.5 volt ALKALINE batteries into the and the Month digits will flash. Use the “+” and clock according to the polarity marked on the battery “- / F°/C°” buttons to select the correct month. compartment. Once the battery is properly installed in the clock, the 6. Set Date - Date unit will beep and all segments of its LCD will briefly Once the month is set, press the “SET” button

ページ3に含まれる内容の要旨

If the “SNZ” button is pressed, the alarm will silence for Immediately remove all low power batteries to avoid approximately 5 minutes, after which it will begin to leakage and damage. Replace only with new batteries sound again. of the recommended type. The alarm uses 3 different patterns of tone, beginning When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring gently and increasing in intensity, known as a agents as they may mark the L

ページ4に含まれる内容の要旨

or reconditioned parts or products if found to be defective All rights reserved. This handbook must not be reproduced in during the limited warranty period specified above. All any form, even in excerpts, or duplicated or processed using replaced parts and products become the property of La electronic, mechanical or chemical procedures without written Crosse Technology, Ltd and must be returned to La Crosse permission of the publisher. Technology, Ltd. Replacement parts and products assum