ページ1に含まれる内容の要旨
Security
Security
System
System
User's Manual
®
Safewatch Pro 2000
N7527–5V3 Rev. B 1/01 Model SAVS20ADT-1 or SAVS20ADTG UL File No. S1632
ページ2に含まれる内容の要旨
IMPORTANT! PROPER INTRUSION PROTECTION For proper intrusion coverage, sensors should be located at every possible point of entry to a home or commercial premises. This would include any skylights that may be present, and the upper windows in a multi-level building. In addition, we recommend that radio backup be used in a security system so that alarm signals can still be sent to the Customer Care Center in the event that the telephone lines are out of order (alarm signals are normally sent over
ページ3に含まれる内容の要旨
TABLE OF CONTENTS CHIME MODE 20 .......................................................... SYSTEM OVERVIEW 4 ................................................ General 4 .................................................................... PANIC KEYS 21 ........................................................... A Partitioned System 4 .................................................. SINGLE-BUTTON PAGING FEATURE 22 ..................... Zones 4 .....................................................
ページ4に含まれる内容の要旨
SYSTEM OVERVIEW General Congratulations on your ownership of an ADT Partitioned Security System. You've made a wise decision in choosing it, for it represents the latest in security protection technology today, and millions of premises are protected by ADT systems. This system offers you three forms of protection: burglary, fire and emergency. Your system consists of at least one touchpad which provides control of system operation, and includes various sensors which provide perimeter and interio
ページ5に含まれる内容の要旨
SYSTEM OVERVIEW (Continued) Burglary Your system provides three modes of burglary protection: STAY, AWAY, and INSTANT, and Protection allows you to BYPASS selected zones while leaving the rest of the system armed. You must turn on or "arm" the burglary protection portion of your system before it will sense burglary alarms. The system also provides a CHIME mode, for alerting users to the opening of protected doors and windows while the system is disarmed. Refer to the other sections of this manu
ページ6に含まれる内容の要旨
SYSTEM OVERVIEW (Continued) Memory of Alarm When an alarm condition occurs, the touchpad displays the number(s) of the zone(s) that caused the problem, and displays the type of alarm (ex. FIRE, ALARM). It remains displayed until it is cleared by disarming the system (see DISARMING THE SYSTEM section). Phone Access & Your system may include a voice module that will permit you to access the system via a Touch- Voice tone phone, either on-premises or by call-in when away. The phone access feature w
ページ7に含まれる内容の要旨
ENTRY/EXIT DELAYS General Your system has preset time delays, known as exit delay and entry delay. Whenever you arm Information your system, exit delay gives you time to leave through the designated exit door without setting off an alarm. Exit delay begins immediately after entering any arming command, and applies to all modes of arming protection. If programmed, a slow beeping will sound throughout the exit delay period. Entry Delays give you time to disarm the system when you re-enter through
ページ8に含まれる内容の要旨
ENTRY/EXIT DELAYS (Continued) Exit Alarms Whenever you arm the system, the exit delay begins. If an entry/exit door or interior zone is faulted when the exit delay ends (e.g., exit door left open), the system sounds an alarm and starts the entry delay timer. If you disarm the system before the entry delay ends, the alarm To minimize false alarms sound stops and the message "CANCELED ALARM" or "CA" is displayed on the touchpad, sent to the Customer along with a zone number indicating the faulted
ページ9に含まれる内容の要旨
ABOUT THE TOUCHPADS General Your touchpads allow you to control all system functions. The touchpads feature a telephone style (digital) touchpad and a Liquid Crystal Display (LCD) which shows the nature and location of all occurrences. The touchpads also feature a built-in sounder which will sound during alarms and troubles. The touchpads also "beep" during certain system functions, such as during entry/exit delay times, in CHIME mode, and when depressing any of the keys (to acknowledge the key
ページ10に含まれる内容の要旨
ABOUT THE TOUCHPADS (Continued) English Display Touchpad AWAY: All burglary zones, interior and perimeter, are armed. NO AC AWAY STAY: Perimeter burglary zones, such as protected windows and TEST BYPASS doors, are armed. NOT READY STAY CHIME BAT ALARM INSTANT: Perimeter burglary zones armed and entry delay is turned off. CHECK INSTANT FIRE BYPASS: This appears when one or more burglary protection zones ENGLISH DISPLAY TOUCHPAD have been bypassed. NOT READY: Appears when burglary portion o
ページ11に含まれる内容の要旨
Q FUNCTIONS OF THE TOUCHPADS 1. DISPLAY WINDOW. 9 10. CHIME KEY: Turns CHIME mode on and off. When Custom English Display Touchpads: These 2-line, 32- on, the opening of windows or doors while the system character Liquid Crystal Display (LCD) touchpads display is disarmed will sound 3 beeps at the touchpad(s). protection point identification, system status, and messages. . 11. READY KEY: Used to display all open protection zones English Display Touchpads: Display p
ページ12に含まれる内容の要旨
Q 1 15 1 15 14 14 ARMED READY ARMED READY 16 4 16 4 3 3 5 5 2 2 A 1 OFF 23 AWAY STAY 6 A AWAY 1 OFF 23 STAY 6 7 B 7 17 4 5 TEST 6BYPASS B 4 5 BYPASS 17 TEST 6 9 9 C 7 INSTANT 8 CODE 9 CHIME C 7 INSTANT 8 CODE 9 CHIME 10 10 D 18 READY 0 # D 18 READY 0 # 8 8 12 11 12 11 13 13 KEYPAD SHOWN WITHOUT SWING-DOWN FRONT DOOR English Display Touchpad Custom English Display Touchpad (Touchpads shown without swing-down front door) • When entering codes and commands, sequential key depressions must be made I
ページ13に含まれる内容の要旨
Q Q Q Q CHECKING FOR OPEN ZONES Using the Before arming your system, all protected doors, windows and other protection zones must be closed or bypassed (see BYPASSING PROTECTION ZONES section), otherwise READY Key the touchpad will display a "Not Ready" message, and the READY indicator light on your touchpad will not be lit. The READY key can be used to display all faulted zones, making it easier for you to secure any open zone. To display faulted zones, simply press and release the READY
ページ14に含まれる内容の要旨
Q (With Entry Delay ON) ARMING PERIMETER ONLY Using the Use this key when staying inside, but expect someone to use an entry/exit door later. It is also useful if you are leaving but someone is staying inside (or if you have pets which are 3 STAY Key moving throughout the premises. 1. Enter your security code and press the STAY [3] key. In some systems, pressing BEFORE ARMING, the “B” key on on the touchpad for 2 seconds will arm the system STAY (no code is close all doors and windows re
ページ15に含まれる内容の要旨
Q (With Entry Delay OFF) ARMING PERIMETER ONLY Using the Use this key when staying inside and do not expect anyone to use an entry/exit door. CAUTION: Arming the system in this mode will greatly increase the chance of 7 INSTANT Key false alarms. Use extreme care in selecting this mode of arming. 1. Enter your security code and press the INSTANT [7] key. BEFORE ARMING, close all doors and windows 2. The touchpad beeps three times and displays the armed message. The red ARMED (see CHECKING FOR
ページ16に含まれる内容の要旨
[ [ (With Entry Delay ON) ARMING ALL PROTECTION Using the Use this key when no one will be staying inside. 2 AWAY Key 1. Enter your security code and press the AWAY [2] key. In some systems, pressing the “A” key on the touchpad for 2 seconds will arm the system AWAY (no code is required). The “A” key may or may not have been programmed for this. Check with BEFORE ARMING, your installer. close all doors and windows (see CHECKING FOR OPEN 2. The touchpad begins beeping and displays the arme
ページ17に含まれる内容の要旨
DISARMING AND SILENCING ALARMS Using the The OFF key is used to disarm the system, silence alarm and trouble sounds, and clear alarm memories. A BURGLARY alarm is a continuous/steady sound from the 1 OFF Key touchpads and any external sounders. IMPORTANT: To Disarm the System If you return and the Enter your security code and press the OFF key. main burglary sounder The "Ready" indicator light will be lit if all zones are secure, and the touchpad will emit a is on, DO NOT ENTER, but single
ページ18に含まれる内容の要旨
BYPASSING PROTECTION ZONES Using the This key is used when you want to arm your system with one or more zones intentionally unprotected. The system must be disarmed first. 6 BYPASS Key 1. Enter your security code and press the BYPASS [6] key. LIMITATION 2. Enter the zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.). The system will not allow Single digit zone numbers must be preceded by a zero (e.g. 05, 06). fire zones to be by- 3. When finished, the touchpad will mome
ページ19に含まれる内容の要旨
BYPASSING PROTECTION ZONES (Continued) Quick Bypass If your system supports "Quick Bypass", it allows you to easily bypass all open (faulted) zones without having to enter zone numbers individually. This feature is useful if, for Ask your installer if example, you routinely leave certain windows open when arming at night. "Quick Bypass" is active for your system, and if To use this feature, enter your security code and, within 10 seconds, press the BYPASS so, check here: [6] key, then stop.
ページ20に含まれる内容の要旨
CHIME MODE Using the Your system can be set to alert you to the opening of a perimeter door or window while it is disarmed by using CHIME mode. 9 CHIME Key When activated, three tones will sound at the touchpad whenever a perimeter door or window is opened. Interior zones will not produce a tone when they are activated. This feature can be used only while the burglary Pressing the READY key will display the open protection points. system is disarmed. To turn Chime Mode on: Enter the secur
