ページ1に含まれる内容の要旨
Website:http://www.LGEservice.com
E-mail:http://www.LGEservice.com/techsup.html
WASHING MACHINE
SERVICE MANUAL
!
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE
PROBLEMS CORRECTLY BEFORE SERVICING THE UNIT.
MODEL : WM2411HW/WM2011H*/WM1811CW
WM2432HW/WM2032H*/WM1832CW
WM0532HW/WD-10210BD/WD-12210(5)BD
WM2444H*M/WM2442H*/WM2042CW
WM0642H*
100
ページ2に含まれる内容の要旨
DEC. 2002 PRINTED IN KOREA P/No.:3828ER3013T 101
ページ3に含まれる内容の要旨
CONTENTS 1. SPECIFICATIONS .........................................................................................................................3 2. FEATURES & TECHNICAL EXPLANATION ................................................................................ 5 3. PARTS IDENTIFICATION ............................................................................................................ 7 4. INSTALLATION...............................................................................
ページ4に含まれる内容の要旨
1. SPECIFICATIONS WM2411HW WM2011HS / WM2011HW WM1811CW ITEM WM2432HW WM2032HS / WM2032HW WM1832CW WD-12210(5)BD WM0532HW / WD-10210BD POWER SUPPLY 120V ~ 60Hz PRODUCT WEIGHT 190 lbs. (86 kg) WASHING 280W 235W ELECTRIC POWER DRAIN MOTOR 80W CONSUMPTION WASH HEATER 1000W - WASH 42 rpm REVOLUTION SPEED SPIN 0-1200 rpm 0-1000 rpm 0-900 rpm CYCLES 9 7 5 WASH / RINSE TEMPERATURES 6 5 4 SPIN SPEEDS 6 5 5 OPTIONS Prewash, Stain Cycle, Quick Cycle, Extra Rinse, Rinse+Spin, Delay Wash CUSTOM PROGRAM In
ページ5に含まれる内容の要旨
ITEM WM2444H*M WM2442H*/WM0642H* WM2042CW POWER SUPPLY 120V ~ 60Hz PRODUCT WEIGHT 190 lbs. (86 kg) WASHING 280W 235W ELECTRIC DRAIN MOTOR 80W POWER CONSUMPTION WASH HEATER 1000W - WASH 42 rpm REVOLUTION SPEED SPIN 0-1200 rpm 0-1000 rpm CYCLES 7 5 WASH / RINSE TEMPERATURES 6 4 SPIN SPEEDS 6 5 OPTIONS Prewash, Stain Cycle, Quick Cycle, Extra Rinse, Rinse+Spin, Delay Wash CUSTOM PROGRAM Incorporated WATER CIRCULATION Incorporated - OPERATIONAL WATER PRESSURE 4.5-145 psi (30-1000 kPa) CONTROL TYP
ページ6に含まれる内容の要旨
2. FEATURES & TECHNICAL EXPLANATION 2-1.FEATURES Direct Drive System The advanced Brushless DC motor directly drives the drum without belt and pulley. Tilted Drum and Extra Large Door Opening The tilted drum and extra large door opening make it possible to load and unload easily. Water Circulation Spray detergent solution and water onto the load repeatedly. Clothes are soaked more quickly and thoroughly during the wash cycle. Detergent suds are eliminated more easily by the water shower
ページ7に含まれる内容の要旨
2-2.FUZZY LOGIC WASHING TIME OPTIMIZATION To get the best washing performance, optimal time is determined by the water temperature, the selected washing temperature, and the size of the load. water temperature washing time the best selected FUZZY washing washing rinsing time temperature LOGIC performance spin rhythm, time load size SENSING PROCESSING DETERMINATION EFFECT 2-3.WATER LEVEL CONTROL This model incorporates a pressure sensor which can sense the water level in the tub. The water suppl
ページ8に含まれる内容の要旨
3. PARTS IDENTIFICATION • If the supply cord is damaged, it must be replaced by the manufacturer or its authorized service technician in order to avoid a hazard. (PLC Modem) ACCESSORIES 7
ページ9に含まれる内容の要旨
4. INSTALLATION Before servicing, ask the customer what the trouble is. Check the setup (power supply is 120V AC, remove the transit bolts....). Check with the troubleshooting guide. Plan your service method by referring to the disassembly instructions. Service the unit. After servicing, operate the appliance to see whether it functions correctly. STANDARD INSTALLATION The appliance should be installed as follows: REMOVE THE TRANSIT INSTALL THE APPLIANCE ADJUST THE ON A FLAT AND FIRM SURFACE
ページ10に含まれる内容の要旨
HOW TO CONNECT THE INLET HOSE Verify that the rubber washer is inside of the valve connector. Connect the inlet hose firmly to prevent leaks. CONNECT THE DRAIN HOSE Make sure that the hose is not twisted. Avoid submerging the end of the hose. The end of the drain hose should be placed less than 96” from the floor. CONNECT POWER PLUG Avoid connecting several electric devices, as Connect the power plug to the wall outlet. doing so may cause a fire. 9
ページ11に含まれる内容の要旨
TEST OPERATION Preparation for Press the POWER button. Press the Start/Pause washing. button. Connect the power plug to Listen for clicking sounds to the outlet. determine if the door has Connect the inlet hose. locked. Check the water heating Check the automatic Check the water supply. function. reversing rotation of the drum. Press the WASH / RINSE button Make sure that the drum rotates Verify that if water is supplied clockwise and counterclockwise. through the detergent dispenser. and t
ページ12に含まれる内容の要旨
5. OPERATION • Use this button to turn the power • Lights whenever the door is locked. • Choose High / Low On / Off. • The door can be unlocked by pressing the Start / Pause button to stop the washer. • Rotate the Cycle selector knob to select the cycle designed for different types of fabric and soil levels. • Allows you to store a customized wash cycle for future use. • To create a Custom Program : • Select a water temperature based o load you are washing. 1) Select a cycle. 2) Select the oth
ページ13に含まれる内容の要旨
/ Off. • These lights show elapsed time of the • This display shows : selected cycle. a) the estimated time remaining in the cycle when operating. b) an error code when an error has been detected. • Use this button to Start / Stop the washer. • Use this option to prevent • Prewash : Use this option for loads that need pretreatment. unwanted use of the washer. It adds 16 minutes prewash and drain. on the type of Press and hold Quick Cycle and • Stain Cycle : Adds time to the wash and rinse cycles
ページ14に含まれる内容の要旨
WM2411HW WM2011HS / WM2011HW WM1811CW WM2432HW / WD-12210(5)BD WM2032HS / WM2032HW / WM0532HW / WD-10210BD WM1832CW 13
ページ15に含まれる内容の要旨
WM2444H*M/WM2442H* WM2042CW WM0642H* CONFORTOR 14
ページ16に含まれる内容の要旨
6. WIRING DIAGRAM / PROGRAM CHART WM2411HW / WM2011HS / WM2011HW / WM2432HW / WM2032HS / WM2032HW / WM0532HW / WD-10210BD / WD-12210(5)BD WM1811CW / WM1832CW 15
ページ17に含まれる内容の要旨
WM2444H*M WM2442H*M/WM0642H* 16
ページ18に含まれる内容の要旨
WM2042CW 17
ページ19に含まれる内容の要旨
18
ページ20に含まれる内容の要旨
7. TROUBLESHOOTING 7-1. BEFORE PERFORMING SERVICE Be careful of electric shock when disconnecting parts for while troubleshooting. The voltage of each terminal is 120V AC and DC when the unit is plugged in. 7-2. QC TEST MODE. The washer must be empty and the controls must be in the off state. ¤¤ Press the SPIN SPEED and SOIL LEVEL buttons simultaneously. ¤¤ŁŁPress the Power button, while the above condition. Then buzzer sound twice. ¤¤ØØIn order to advance to the next step of test mode, press
