ページ1に含まれる内容の要旨
MA1106-EA
Operation Guide 3288
About This Manual
Depending on the model of your watch, display text
appears either as dark fi gures on a light background or
light fi gures on a dark background. All sample displays
in this manual are shown using dark fi gures on a light
background.
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and tech
ページ2に含まれる内容の要旨
Operation Guide 3288 With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for Screen To do this: Do this: times in the range of noon to 11:59 p.m. and no indicator appears to the left of the Reset the seconds to Press D. hour digits for times in the range of midnight to 11:59 a.m. Change the city code Use D (east) and B (west). With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator. Toggle between Daylight Saving
ページ3に含まれる内容の要旨
Operation Guide 3288 To set an alarm time 3. Press C to move the fl ashing between the hour and minute settings. 4. While a setting is fl ashing, use D (+) and B (–) to change it. 1. In the Alarm Mode, use D and B to scroll through the When setting the alarm time using the 12-hour format, take care to set the time alarm screens until the one whose time you want to set correctly as a.m. (indicator not displayed) or p.m. (P indicator). is displayed. 5. Press A to exit the setting screen. DD
ページ4に含まれる内容の要旨
Operation Guide 3288 Alarms: 5 daily alarms (4 one-time alarms: 1 snooze alarm); Hourly Time Signal Illumination: EL Backlight (electro-luminescent panel); Selectable illumination duration Other: Button operation tone on/off Battery: One lithium battery (Type: CR1616) Approximately 3 years on type CR1616 (assuming alarm operation 10 seconds per day, and one illumination operation 1.5 seconds per day) City Code Table E-30 L-1 City Code Table City UTC Offset/ City UTC Offset/ City City Code GMT
