ページ1に含まれる内容の要旨
SNOOZE
ON
OFF
SNOOZE
ON
OFF
MA0410-EA
Operation Guide DQD110/120B
ILLUSTRATION
< >
DQD-110B
MAX/MIN
ALARM SET
MAX/MIN
MAX/MIN
ALARM SET
ALARM SET
MAX/MIN ALARM SET
WAVE DEMO
WAVE DEMO
WAVE DEMO
WAVE DEMO
SIGNAL ON/OFF SET RESET
SIGNAL ON/OFF SET RESET
SIG SET RESET
SIG SET RESET
• A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Depending on its model number, the configuration of your clock may differ somewha
ページ2に含まれる内容の要旨
Operation Guide DQD110/120B • Signal reception is normally better at night than during the day. GENERAL GUIDE • Radio interference can make signal reception impossible. • Strong electrostatic charge can result in the wrong time being set. 1 SNOOZE/LIGHT button • Press this button to illuminate the display for about three seconds. • Pressing this button while the alarm is sounding stops the alarm. USING THE CLOCK 1 2 MAX/MIN button This clock can receive the time calibration signals transmitted f
ページ3に含まれる内容の要旨
Operation Guide DQD110/120B • Holding down or changes the flashing digits at USING THE CLOCK 2 GMT differential : 0H : 1H : 2H : 3H high speed. Setting the Time and Date Manually • Your GMT differential is a value that indicates the time difference between your current location and Greenwich • When using the clock in an area that is outside of the range of the transmitter or in an area where signal Mean Time (GMT). You can find out the GMT differential reception is impossible for some reason
ページ4に含まれる内容の要旨
Operation Guide DQD110/120B USING THE ALARM 2 Stopping the Alarm Hourly Time Signal On • When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. • To turn off the snooze feature, slide the Alarm Mode selector (4) to OFF. Using the Hourly Time Signal • When turned on, the Hourly Time Signal sounds on the every hour on the hour from 6:00 a.m. to midnight (19 times per day). • Press the SIG button
