ページ1に含まれる内容の要旨
Model MJ-9200W
Washing Machine
Installation Manual
Website: http://www.MajesticAppliances.com
Check this website under Models for the most up-to-date manual. In all situations,
the most current manual goverens in questions of use and warranty
ページ2に含まれる内容の要旨
Welcome... Congr atulations. W elcome to the gro wing family of Majestic™ Appliance o wners. By c hoosing a Majestic Appliances model as y our laundry appliance y ou not only found the best in reliable tec hnology , but abo v e all y ou ha v e found a faithful and untiring con v enience appliance. Y our mac hine is strong, reliable and long lasting. All those qualities w hic h ha v e made the Majestic™ tr ademark famous the w orld o v er . Abo v e all, Majestic products are easy to use.
ページ3に含まれる内容の要旨
Installing/Removing Getting things ready to install your appliance Unpacking, Inspecting, Electricity, Closets/Alcoves, Plumbing, Venting Unpacking • Check the shipped appliance for shipping damage. It is your responsibility to register any damage with the freight company delivering the product. • Remove the strapping, then slide the cardboard surround off the machine. Remove the foam protecting material and the plastic bag. OWNER RESPONSIBLE • Write down the serial number from the box o
ページ4に含まれる内容の要旨
REMOVING THE FOAM DRUM SUPPORT REPLACING THE METAL BOTTOM PAN. WARNING!!! IN ORDER TO REMOVE THE FOAM DRUM SUPPORT AND REPLACE THE METAL BOTTOM PAN, THE BOTTOM OF THE MACHINE MUST BE ACCESSED. SHIPPING BOLTS MUST REMAIN IN THE APPLIANCE WHILE ACCOMPLISHING THIS STEP IN THE PREPARATION PHASE OF THE INSTALLATION. Inspecting WHEN TO REMOVE SHIPPING BOLTS! WARNING!!! TIPPING THE MACHINE TO POSITION IT FOR USE MUST BE DONE WITH THE SHIPPING BOLTS STILL IN THE MACHINE! TIPPING THE MACHI
ページ5に含まれる内容の要旨
Installing/Removing Getting things ready to install your appliance (continued) Electricity Make sure that the voltage and frequency available correspond with the values stated on the data plate located at the back of the machine and that the electric system is dimensioned to withstand the maximum current shown on the data plate. If the socket the machine is connected to does not correspond with the plug, replace the plug with a suitable one and avoid using adapters or shunts since they could
ページ6に含まれる内容の要旨
Installing/Removing Getting things ready to install your appliance (continued) Plumbing - Water, Drains WATER CONNECTION 1. This appliance can be used with either hot/cold or cold/cold connections. 2. The hoses supplied have either a straight end or an elbow end. The elbow end is meant to connect to the washer. Be sure to connect the hot hose to the hot side of the appliance itself, the cold side to the cold connection. (See picture) The straight end to the 3/4” BSP standard hose bib thread
