ページ1に含まれる内容の要旨
LAVAMAT 52810
Washing machine
User information
ページ2に含まれる内容の要旨
Dear Customer, Please read this user information carefully and keep it to refer to later. Please pass the user information on to any future owner of the appli- ance. The following symbols are used in the text: 1 Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance. 3 Useful tips and hints 2 Environmental information 2
ページ3に含まれる内容の要旨
Contents Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Programme overview . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Installation and connection instructions. . . . . . . . . . . . . . . . . 25 Safety information concerning installation . . . . . . . . . . . . . . . . . . . . . . . . 25 Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Removing the transit packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Where
ページ5に含まれる内容の要旨
Operating Instructions 1 Safety Prior to using the appliance for the first time • Follow the “Installation and connection instructions”. If the appliance is delivered in the winter months when there are mi- nus temperatures: store the washing machine at room temperature for 24 hours before using for the first time. Correct use The washing machine is only designed for the washing of normal do- mestic laundry at home. Additions or modifications to the washing machine are not permit- ted.
ページ6に含まれる内容の要旨
General safety Repairs to the washing machine may only be carried out by qualified/ authorised service engineers. Never use the appliance when the electrical cable is damaged or the control panel, worktop or plinth area are damaged to such an extent that the inside of the appliance is openly accessible. Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug from the power point or – if the appliance has been hard-wired – sw
ページ7に含まれる内容の要旨
Description of the appliance Control panel Detergent drawer Rating plate (behind door) Plinth flap/ Screw feet Drain pump (height adjustable) Control panel Spin/RINSE HOLD button Programme progress display Additional programme buttons DELAY TIMER button DOOR indicator Programme selector START/PAUSE button 7
ページ8に含まれる内容の要旨
Programme overview Additional Spin speed programmes Programme 2) ENERGY SAVING 6kg COTTONS/LINEN 3) 6kg 95, 60, 40, 30 EASY-CARES 3kg 60, 40 EASY IRON 40 1kg DELICATES 3kg 40, 30 WOOL/SILK H (Hand-washing) 2kg 30, COLD RINSE 3kg DRAIN SPIN 6kg 1) A 10 litre bucket contains approx. 2.5 kg of dry washing (cotton) 2) Programme settings for tests in accordance with or in support of EN 60 456 and IEC 60 456 are de- scribed in t
ページ9に含まれる内容の要旨
Care Application/Features 1) symbols Energy-saving programme at 60°C for lightly to normally soiled whites/col- M O oureds made of cotton/linen. Programme for normally to heavily soiled coloureds/whites made of cotton/ J M O linen. I K N Programme for easy-care mixed fibres and synthetics. Special programme at 40°C for easy-care fabrics which after being washed K N using this programme need to be ironed only lightly or not at all. Gentle programme for delicate fabrics such as bonded fibres
ページ10に含まれる内容の要旨
Before the first wash 1. Open the detergent drawer. 2. Pour approx. 1 litre of water through the detergent drawer into the washing machine. This closes the water container when the next programme is started and the economy valve can function properly 3.To remove any production-related residues from the drum and water tank, perform the first wash cycle without a load. Programme: COT- TONS/LINEN 60, press the TIME SAVER button, add approx. 1/4 measur- ing cup of detergent. Preparing and sorti
ページ11に含まれる内容の要旨
Running a wash cycle Opening the door/loading washing 1. Open the door: pull the handle on the door. When the appliance is switched on, the DOOR and START/PAUSE indica- tors show whether the door can be opened: DOOR indicator START/PAUSE indicator Can the door be opened? flashing flashing yes, after approx. 2 minutes no, water level and/or illuminated illuminated temperature too high is off flashing yes 2. Separate washing and load loosely. Mix large and small items. Important: Do not get an
ページ12に含まれる内容の要旨
1. Pull out the detergent drawer as far as it will go. 2. Add the detergent/conditioner. 3. Push the detergent drawer in fully. Washing powder/tablets for the main wash cycle Washing powder/tablets Conditioner/ for the pre wash cycle or Wash-care products in-wash stain treatment to preserve the shape of garments/ Starch Washing powder/tablets for the main wash cycle If you are using water softener and require the right-hand compart- ment for detergent for the pre wash cycle/in-wash stain
ページ13に含まれる内容の要旨
Changing the spin speed/selecting rinse hold The washing machine suggests the maximum permitted spin speed suitable for the selected pro- gramme. You can reduce this spin speed: To do this, press the Spin/RINSE HOLD button repeatedly until the required speed is indicated. 3 The spin speed for the final spin can still be changed during the pro- gramme. To do this: 1.Press the START/PAUSE button. 2. Change the spin speed. 3.Press the START/PAUSE button again. RINSE HOLD With RINSE HOLD the was
ページ14に含まれる内容の要旨
Activating/deactivating RINSE+ If RINSE+ is activated, two additional rinse cycles take place with the programmes COTTONS/LINEN, EASY-CARES/EASY IRON, DELICATES and RINSE. RINSE+ remains permanently saved – even after the appliance has been switched off. Activating RINSE+: 1.Turn the programme selector to COTTONS/LINEN, EASY-CARES/EASY IRON or DELICATES (with the temperature of your choice). 2. Simultaneously press and hold the PRE WASH and DELAY TIMER but- tons until RINSE and RINSE+ are il
ページ15に含まれる内容の要旨
Starting a programme 1. Check that the tap is turned on. 2. Press the START/PAUSE button. The programme is started or will start after the delay timer has counted down. During the wash programme the current stage of the programme will be shown in the programme progress display. 3 If after pressing the START/PAUSE button the END indicator flashes 4x, the door has not been correctly shut. Push the door firmly closed and press the START/PAUSE button again. Interrupting a programme/adding washin
ページ16に含まれる内容の要旨
If RINSE HOLD has been selected: Following a rinse hold DOOR and END will illuminate in the programme progress display. First the water must be drained: – Either turn the programme selector to OFF, then to DRAIN and press the START/PAUSE button (the water will be drained without spin- ning), – or turn the programme selector to OFF and then to SPIN. Depending on the type of washing, if required, reduce the spin speed and press the START/PAUSE button (the water will be drained and the washing
ページ17に含まれる内容の要旨
Cleaning and maintenance Important! Do not use furniture care products or aggressive cleaners to clean the appliance. Wipe control panel and body with a damp cloth. Cleaning procedure If you plan to wash mainly at low temperature, you should run a hot programme from time to time. This will reduce any deposits and clean the appliance from the inside. Detergent dispenser drawer The detergent dispenser drawer should be cleaned regularly. 1.Remove the detergent dispenser drawer by pulling it fir
ページ18に含まれる内容の要旨
Door and rubber collar Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door. Clean the glass in the door and the rubber collar regularly. What to do if... Remedying small faults yourself If the programme progress display indicates one of the following fault codes during operation: – END flashes 1x (problem with water inlet), – END flashes 2x (problem with water outflow), – END flashes 4x (door open), please consult
ページ19に含まれる内容の要旨
Problem Possible cause Remedy The tap is turned off. Turn on the tap. The END indicator is Turn off the tap. Unscrew the The filter in the inlet hose flashing 1x. hose, remove the filter and screw connection is blocked. (Problems with the wa- clean it. ter inflow.) The tap is blocked by limes- Check the tap and have it re- cale or is faulty. paired, if necessary. The transit packaging has Removing the transit pack- not been removed. aging. The washing machine vibrates when operating Adjust
ページ20に含まれる内容の要旨
Problem Possible cause Remedy Conditioner has not The conditioner insert in the been rinsed in, com- Clean the detergent drawer, compartment for additives partment w for condi- insert the conditioner insert has not been correctly in- tioner is filled with firmly. serted or is blocked. water. Wait until the DOOR indica- The door is locked. tor goes out and the END in- dicator illuminates. The programme will continue The door cannot be when the power cut has end- opened when the wash- ed. Th
