Intel Netstructure MPRTM0020 Rear Transition moduleの取扱説明書

デバイスIntel Netstructure MPRTM0020 Rear Transition moduleの取扱説明書

デバイス: Intel Netstructure MPRTM0020 Rear Transition module
カテゴリ: モデルカー
メーカー: Intel
サイズ: 3.4 MB
追加した日付: 10/5/2014
ページ数: 44
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスIntel Netstructure MPRTM0020 Rear Transition moduleの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Intel Netstructure MPRTM0020 Rear Transition moduleに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Intel Netstructure MPRTM0020 Rear Transition moduleをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Intel Netstructure MPRTM0020 Rear Transition moduleのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Intel Netstructure MPRTM0020 Rear Transition moduleの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Intel Netstructure MPRTM0020 Rear Transition module 取扱説明書 - Online PDF
Advertisement
« Page 1 of 44 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Intel Netstructure MPRTM0020 Rear Transition moduleを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Intel Netstructure MPRTM0020 Rear Transition moduleの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

®
Intel NetStructure MPRTM0020
Rear Transition Module
Technical Product Specification
April 2006
Order Number: 309383-004

ページ2に含まれる内容の要旨

® INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,

ページ3に含まれる内容の要旨

Contents 1 Document Organization ................................................................................................................7 1.1 Acronyms and Terms............................................................................................................7 2 Functional Overview .....................................................................................................................9 3 Operating the Unit ...........................................................

ページ4に含まれる内容の要旨

6.4.1 Mean Time Between Failure (MTBF) Specifications .............................................35 6.4.1.1 Environmental Assumptions ..................................................................35 6.4.1.2 General Assumptions.............................................................................35 6.4.1.3 General Notes........................................................................................36 6.5 Power Consumption ......................................................

ページ5に含まれる内容の要旨

Tables 1 Acronyms and Terms....................................................................................................................7 2 Serial Port Connector Pinout ......................................................................................................18 3 USB Connector Pinout................................................................................................................18 4 RJ-45 Ethernet Connector Pinout.................................................

ページ6に含まれる内容の要旨

Revision History Date Revision Description Updated values for temperature sensor thresholds in “Sensor Data Record for RTM” table. April 2006 004 Updated faceplate illustration. Initial production release. January 2006 003 Added new info on grounding procedure, power supplies, SAS redriver, faceplate LEDs, and RTM sensors. Updated P31 pinout. Added “Operating the Unit”, “RTM Management Architecture”, and December 2005 002 “Detailed Specifications” chapters September 2005 001 Initial release o

ページ7に含まれる内容の要旨

Document Organization Document Organization 1 ® The Intel NetStructure MPRTM0020 Rear Transition Module Technical Product Specification is organized as follows: • Chapter 1, “Document Organization” provides a table of acronyms and terms that are used throughout the document. • Chapter 2, “Functional Overview” describes the features of the Rear Transition Module. • Chapter 3, “Operating the Unit” includes information about installing and removing the Rear Transition Module. • Chapter 4, “Modul

ページ8に含まれる内容の要旨

Document Organization Table 1. Acronyms and Terms (Sheet 2 of 2) Term Definition Hot Swap A specific specification from the PICMG 3.0 Spec. 2 I C A two-wire serial bus. Licensed by Phillips Semiconductors. ® IA-32 32-bit Intel Architecture I/O Input/Output Intelligent Platform Management Bus. The bus that interconnects all boards in the chassis IPMB to the Shelf Manager. Intelligent Platform Management Bus Channel 0 as defined in the IPMI v1.5 specification. IPMB-0 This is the logical aggregat

ページ9に含まれる内容の要旨

Functional Overview Functional Overview 2 Rear Transition Modules (RTM) are important components in many telecommunications and embedded systems. These environments place most of the active components on a Front Board and most of the cable connections (especially copper cables) are made from the RTM. This allows the Front Board to be replaced without the need to reinsert a large number of cables in the correct order. In AdvancedTCA* systems, the Front Board mates directly with the RTM, as s

ページ10に含まれる内容の要旨

Functional Overview • One SAS x4 connector to support external SAS JBOD. (Only three of these SAS ports on the RTM are usable; the first SAS port is used by the MPCBL0020 Single Board Computer’s local SAS drive.) • Six T1/E1 ports with transformer and protection circuitry (designed primarily for intra- building applications) 2 • I C connectivity to the SBC for remote management capabilities • OOS and Health LEDs • Hot Swap status LED. This LED mirrors the indication of the HS status LED on the

ページ11に含まれる内容の要旨

Operating the Unit Operating the Unit 3 3.1 Introduction ® The Intel NetStructure MPRTM0020 Rear Transition Module is a non-intelligent RTM. A non- intelligent FRU does not have a remote management controller (RMC) on board to communicate with the SBC IPMC. Instead, all of the non-intelligent RTM sensors and FRU device information is 2 made available to the IPMC through direct device access. This is usually done via dummy I C sensor and storage devices. It is the responsibility of the IPMC to

ページ12に含まれる内容の要旨

Operating the Unit 3.4 Digital Ground to Chassis Ground Connection Digital ground can be tied to chassis ground through a jumper (P2) located near the bottom, right corner of the RTM. In the default grounding for the MPRTM0020, digital ground is isolated from chassis ground (jumper link connecting “NC” to “GND”) as shown in Figure 2. Figure 2. Default Grounding on MPRTM0020 To connect the digital ground to the chassis ground, follow this procedure: 1. Remove the jumper link from the default lo

ページ13に含まれる内容の要旨

Operating the Unit Figure 3. Digital Ground Connected to Chassis Ground Note: Digital ground is also called “logic ground”. Chassis ground is also known as “shelf ground”. ® Intel NetStructure MPRTM0020 Technical Product Specification – April 2006 13

ページ14に含まれる内容の要旨

Rear Panel Transformers / Sidactors Backplane Module Components Module Components 4 4.1 Block Diagram Figure 4 shows a functional block diagram of the RTM. Figure 4. RTM Functional Block Diagram P30 Power SAS 3 SAS 2 ADM1026 (x3) IPMB/I C Port RMD P31 2xGbE RJ-45 GbE (from Port Fabric Redriver Interface) RJ-45 GbE P32 Port USB USB Port P33 RJ-45 Serial Port Serial 2xT1/E1 From Mezz. #1 1x6 2xT1/E1 RJ-48C T1/E1 From Mezz. #2 Ports 2xT1/E1 From Mezz. #3 ® 14 Intel NetStructure MPRTM0020 Te

ページ15に含まれる内容の要旨

Module Components 4.2 Physical Layout Figure 5. Rear Transition Module (RTM) ® Intel NetStructure MPRTM0020 Technical Product Specification – April 2006 15

ページ16に含まれる内容の要旨

Module Components Figure 6 identifies the connectors and LEDs on the RTM faceplate. Figure 6. RTM Faceplate Connectors and LEDs SAS Connector Fabric Interface Port A OOS LED Fabric Interface Port B Health LED USB Connector Serial Port Connector T1/E1 RJ48C from PMC1 T1/E1 RJ48C from PMC2 T1/E1 RJ48C from PMC3 Hot Swap LED ® 16 Intel NetStructure MPRTM0020 Technical Product Specification – April 2006

ページ17に含まれる内容の要旨

Module Components 4.3 Components Description The following sections describe the components shown in Figure 4 through Figure 6. 4.3.1 Serial Port Interface One serial port (RS-232) connector is present on the RTM. This connector provides access to the COM1 serial port from the MPCBL0020 Single Board Computer, which is also routed to the front panel of the SBC. Both connections are active, but only one can be used at any given time. The line driver/receiver for the serial port resides on the SB

ページ18に含まれる内容の要旨

Module Components Table 2. Serial Port Connector Pinout Pin Signal Name 1RTS 2DTR 3TXD 4GND 5GND 6RXD 7DSR 8CTS 4.3.2 USB Interface One USB port is provided on the RTM. 5V power is available through this USB port with a current limit of 400mA. Figure 8 illustrates the USB connector and Table 3 provides pinout information. Figure 8. USB Connector (J2) Table 3. USB Connector Pinout Pin Signal Name 15V_USB 2USB– 3USB+ 4GND 4.3.3 Gigabit Ethernet Interface Two Gigabit Ethernet ports with LEDs are p

ページ19に含まれる内容の要旨

Module Components Figure 9. RJ-45 Gigabit Ethernet Connector Table 4. RJ-45 Ethernet Connector Pinout Pin Signal Name 1MDI0+ 2MDI0– 3MDI1+ 4MDI2+ 5MDI2– 6MDI1– 7MDI3+ 8MDI3– 4.3.4 SAS Connector Interface One x4 SAS (Serial Attached SCSI) connector is present on the RTM. When the MPRTM0020 is connected to a MPCBL0020 Single Board Computer, only three of the four high-speed serial interfaces is available on the SAS connector, because one port is already used for the on-board local SAS drive on

ページ20に含まれる内容の要旨

Module Components Figure 10. SAS Connector Pin 23 Pin 2 Pin 25 Pin 24 Pin 3 Pin 1 Table 5. SAS Connector Pinout Pin Signal Name Pin Signal Name 1 GND 14 SAS_TX3– 2 SAS_RX0+ 15 SAS_TX3+ 3 SAS_RX0– 16 GND 4 GND 17 SAS_TX2– 5 SAS_RX1+ 18 SAS_TX2+ 6 SAS_RX1– 19 GND 7 GND 20 SAS_TX1– 8 SAS_RX2+ 21 SAS_TX1+ 9 SAS_RX2– 22 GND 10 GND 23 SAS_TX0– 11 SAS_RX3+ 24 SAS_TX0+ 12 SAS_RX3– 25 GND 13 GND Note: The SAS_RX3 and SAS_TX3 interfaces are not physically connected to the SAS controller on MPCBL0020. The


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Intel MPRTM0020 取扱説明書 モデルカー 1
2 Addonics Technologies CCM35MK2-E 取扱説明書 モデルカー 2
3 Aiphone GT-AC 取扱説明書 モデルカー 4
4 Avanti 308YWT 取扱説明書 モデルカー 325
5 Avanti 309YBT 取扱説明書 モデルカー 65
6 B&B Electronics ESR901 取扱説明書 モデルカー 2
7 Canon Deluxe Sports Roadster 1 取扱説明書 モデルカー 1
8 Dell 530 取扱説明書 モデルカー 0
9 Addonics Technologies CCM35MK1-E 取扱説明書 モデルカー 0
10 Atlas COMMANDER 330 取扱説明書 モデルカー 4
11 Drive Medical Design 13049SV 取扱説明書 モデルカー 1
12 Eton VECTOR 250R 取扱説明書 モデルカー 85
13 Excalibur electronic NASCAR 9511-3 取扱説明書 モデルカー 2
14 Balance Balcar "U" BI-CABLE 10505 取扱説明書 モデルカー 12
15 B&B Electronics ESR902 取扱説明書 モデルカー 2