ページ1に含まれる内容の要旨
Quick Start Guide
H-1266
PAGE 1 OF 10 0808 IH-1266
ページ2に含まれる内容の要旨
Engl ish Quick Start Guide Follow these steps to install the LabelWriter printer and print your first label. 1. Unpacking your LabelWriter Printer NOTE Do not plug the printer into your computer until asked to do so during the software installation. 1 Unpack your printer and save the packing materials. 2 Make sure you have all the items shown in Figure 1. (Labels included in the package may vary.) Roll of Roll of Quick Start Guide address labels DYMO Stamps labels LabelWriter Quick Start CD
ページ3に含まれる内容の要旨
Become familiar with the printer’s major components. See Figure 2. Top cover Label roll Platen release Label feed path and tear bar DC power USB connector Cable Label connector channels spool Form-feed Label eject button and LED button Figure 2 LabelWriter Printer Features Your LabelWriter printer is a direct thermal printer and does not use ink or toner. Instead, the printer uses heat from a thermal print head to print on specially treated labels. Labels are the only supplies you will ever
ページ4に含まれる内容の要旨
2. Installing the Software NOTE Do not connect the printer to your computer until instructed to do so during the software installation. To install the software on a Windows system 1 Insert the LabelWriter CD into your CD-ROM drive. After a few seconds, the installation screen appears. If the installation screen does not appear: a. Click Start, then Run on the Windows taskbar. The Run dialog box appears. b. Enter D:\install.exe (where D is the letter assigned to the CD-ROM drive) and clic
ページ5に含まれる内容の要旨
3. Connecting your LabelWriter Printer NOTE Do not connect the printer to your computer Power Adapter until instructed to do so during the software installation. To connect the cables Power Cord 1 Plug the power cord into the power adapter. Figure 4 See Figure 4. 2 Plug the power adapter into the power connector USB Power on the bottom of the printer. See Figure 5. 3 Plug the other end of the power cord into a power outlet. 4 Plug the USB cable into the USB port on the bottom of the pri
ページ6に含まれる内容の要旨
4. Loading Labels The LabelWriter Twin Turbo printer holds two label rolls, so you can print two types of labels without having to change the label roll. For example, load address labels on the left side and postage labels on the right side. To load a label roll Spool Spool guide spindle 1 Press the form-feed button to eject the labels that protected the printer during shipment. 2 Open the top cover and remove any packing material inside the label compartment. Figure 7 3 Remove the label spo
ページ7に含まれる内容の要旨
7 Align the left edge of the label with the left edge of the label feed slot and insert the label into the slot. See Figure 10. The printer feeds the labels, stopping at the beginning of the first label. If the printer does not feed the labels, make sure the first label is fully inserted and then Figure 10 press the form-feed button. 8 Repeat Steps 3 through 7 to load a second roll of labels (for example, postage labels). 9 Close the top cover. You are now ready to print address or postag
ページ8に含まれる内容の要旨
4 Choose Left Roll or Right Roll from the Label Roll drop-down list to select the side of the printer where the address labels are loaded. See Figure 11. 5 Click to print the label. Figure 11 highlights some of the features available in DYMO Label Software. Insert text you’ve Verify and correct addresses as you add them Select the label copied to the Insert text, addresses, Clipboard. to the Address Book. roll for your label pictures, rectangles, lines, barcodes, dates, or counters. If you
ページ9に含まれる内容の要旨
Printing Postage with ™ DYMO Stamps Now you can print postage right from your desktop using your LabelWriter Twin ™ Turbo label printer. All you need is DYMO Stamps software, your LabelWriter printer, DYMO Stamps labels, and an Internet connection . To install DYMO Stamps and print postage 1 Sign up for your USPS account with Endicia. Go to: www.endicia.com/dymostamps 2 At the end of the sign up process, download and install the DYMO Stamps software. DYMO Stamps software is available for b
ページ10に含まれる内容の要旨
4 Select Buy Postage from the Account menu and purchase postage for your account. 5 Select LabelWriter Twin Turbo from the Printer drop-down list under Printer Selection. 6 Assuming you loaded the DYMO Stamps labels in the right side of the printer, select Right Roll as the Label Roll and click OK. 7 Click Test Print to print a voided postage label. You are now ready to start printing actual postage whenever you need it. Refer to the DYMO Stamps online Help for more information about u
