ページ1に含まれる内容の要旨
®
INSTALL GUIDE
1000, ADA & 29 Series Models
ADA24R ADA24RG 75F
1115R 1075BEV
1115WC 1175BEV
1175R 1075WC
29R
1175WC
The Built-In Undercounter Leader Since 1962 U-LINE.COM
ページ2に含まれる内容の要旨
1 Table of Contents Safety Precautions Safety Alert Definitions.........................................................................................................................................1 General Precautions..............................................................................................................................................1 Inspect & Plan Product Registration ...................................................................................................
ページ3に含まれる内容の要旨
2 Safety Precautions General Precautions Use this appliance for its intended purpose only and follow these IMPO IMPOR RT TANT ANT general precautions with those listed throughout this guide: • PLEASE READ all instructions before installing, operating, or servicing the appliance. DANGER RISK OF CHILD ENTRAPMENT. Before you throw away your • Proper installation procedures must be followed when old refrigerator or freezer, take off the doors and leave shelves completing an installation or relo
ページ4に含まれる内容の要旨
Tools / Material Required 3 Inspect & Plan • Screwdrivers — slotted and Phillips head • 1/4-inch thick door panel material and cutting tools (If installing a 1/4” Panel) (optional for finishing wood fronts) Product Registration • Minwax® Water-Based Wood Stain • Minwax® Polycrylic® Protective Finish You have received a carton containing your U-Line Wine Captain®, Refrigerator, or Beverage Center with a package inside • Foam Applicator and / or Synthetic Bristle Brush containing a Use and Care
ページ5に含まれる内容の要旨
1115 Series 4 Prepare Site Follow the cut-out drawing The 15-3/16" width allows 1/4" for Your U-Line product has been designed for either free-standing or ease in installation and removal of the unit. 24" is the cabinet depth built-in installation. When built-in, your unit does not require in most installations. additional air space for top, sides or rear. However, the front grille must NOT be obstructed and clearance is required for an electrical connection in the rear. WARNING Unit can
ページ6に含まれる内容の要旨
5 Product Dimensions 1115 Series 1175 Series 23 5/16” 34 3/16” Including Hinge 23 5/16” 34 3/16” 23 1/16" 34 3/16” 24" 3 9/16” 1175 Wine Captain® 3 9/16” 14 15/16" 24" 3 9/16” 1075 Series 1115 Refrigerator & Wine Captain® 1175 Refrigerator & 75FB Not Including Handle Not Including Handle Not Including Handle 23 1/16” 23 5/16” 22 3/4" 34 3/16” 34 3/16” 34 3/16” 3 9/16” 24” 24" 3 9/16” 3 9/16” 14 15/16" 1175 Stainless Refrigerator 1075 Stainless Beverage Center & Wine Captai
ページ7に含まれる内容の要旨
ADA24 Series ADA24R(GL)B Series ADA24R(GL)S Series Not Including Handle 23 1/16” 23 5/16” 32” 32” 24” 24” Refrigerator ADA24RB Stainless Refrigerator ADA24RS Not Including Handle 23 1/2” 23 5/16” 32” 32” 24” 24” Stainless Glass Refrigerator ADA24RGLS Glass Refrigerator ADA24RGLB Product Dimensions 5
ページ8に含まれる内容の要旨
6 Door Swing Dimensions ADA24R(GL)(SB) Series All units have a zero clearance for the door to open 90°. U-Line Wall Wall recommends a minimum door clearance of 2" to accommodate 1/4" Min. 2" Min. the handle if the unit is installed next to a wall or similar type of structure. 21-1/8" 21-1/8" IMPO IMPOR RT TANT ANT Non stainless 1175 or 1115 Wine Captain® models must have a full 135° available for door swing. 1175 & 1075 Series Wall Wall 25-5/16" 25-3/16" 1/4" Min. 2" Min. 90 90 Door Swing Do
ページ9に含まれる内容の要旨
To reverse the door: 7 Standard Doors Remove grille: Remove the grille see MAINTENANCE section of this guide. Door Alignment and Adjustment Align and adjust the door if it is not level, or is not sealing properly. If the door is not sealed the unit may not cool properly, or excessive frost may form in the interior. IMPO IMPOR RT TANT ANT Properly aligned, the door’s gasket should be firmly in contact with the cabinet all the way around the door (no gaps). Carefully examine the door’s gasket
ページ10に含まれる内容の要旨
1 Install bottom hinge: Prepare door for reinstallation: 1. If you have a plate hinge, reorient the pivot screw so it protrudes the opposite direction form the hinge. Remove the For black or white doors: pivot screw from the hinge. Turn the plate over and reinstall 1. Remove plastic hole plug from top of door handle and reinstall the screw. on opposite side. 2. Align hinge outer edge with cabinet. For models with a plate 2. Remove plastic hinge bushing on bottom of door and reinstall on hi
ページ11に含まれる内容の要旨
8 Staining and final finish application: Wood Trim Finishing IMPO IMPOR RT TANT ANT WARNING DO NOT use oil-based stains on wood trim. Vapors from oil-based stains will permanently penetrate the liner and To prevent permanent damage to the inner liner of the will not dissipate over time. Beverage Center and the Wine Captain, the wire rack wood trim MUST be removed from the unit for staining 1. Remove all screws securing wood trim to interior parts, and and/or finishing. Allow stain/finish to
ページ12に含まれる内容の要旨
9 Door Panel Installation Custom 1/4'' Thick Door Panel Insert 2. Pull door gasket out of groove (top Door Panel Preparation edge of door only). Start in the A custom door panel may be inserted into the doorframe. Custom middle and pull outward, moving toward the edge. This may take some door panels can be flat or raised, as long as the maximum panel force. thickness where inserted into the door reveal (channel) is no more than 1/4" thick. For raised panels, the depth of the reveal is 1/4"
ページ13に含まれる内容の要旨
10 Installation 10 Installation 1. Plug in the powercord. Leveling Information 2. Gently push the unit into position. Be careful not to kink the It is recommended that the unit is level. water supply line or entangle the electrical cord. 1. Use a level to check 3. Re-check the leveling, from front to back and side to side. Make the levelness of the any necessary adjustments. The unit’s top surface should be unit from front to approximately 1/8" below the countertop. back and from side 4. R
ページ14に含まれる内容の要旨
® INSTALLATION GUIDE SERVICE INFORMATION If you have a problem with this appliance, your use and care guide has troubleshooting information to help you quickly identify common problems and provide information on possible cause and remedy. Answers to Customers Frequently Asked Questions are available at www.u-line.com/customer/faq.cfm. You may contact U-Line directly: GENERAL INQUIRIES: SERVICE ASSISTANCE: U-Line Corporation Phone (800) 779-2547 P.O. Box 245040 FAX (414) 354-5696 Milwaukee,
