ページ1に含まれる内容の要旨
Nokia 2610 User Guide
9248173
Issue 1
ページ2に含まれる内容の要旨
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RH-86 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/. 0434 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. This applies to your device but also to any enhance
ページ3に含まれる内容の要旨
The contents of this document are provided “as is”. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Pleas
ページ4に含まれる内容の要旨
Log ............................................................................................................... 20 Contents Settings ...................................................................................................... 21 Tone settings......................................................................................... 21 My shortcuts......................................................................................... 21 Call and phone settings.......................
ページ5に含まれる内容の要旨
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. INTERFERENCE All wireless phones may be susceptibl
ページ6に含まれる内容の要旨
QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do
ページ7に含まれる内容の要旨
make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language- dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your device. If
ページ8に含まれる内容の要旨
General information ■ Access codes The security code supplied with the phone protects your phone against unauthorized use. The preset code is 12345. The PIN code supplied with the SIM card, protects the card against unauthorized use. The PIN2 code supplied with some SIM cards, is required to access certain services. If you enter the PIN or PIN2 code incorrectly three times in succession, you are asked for the PUK or PUK2 code. If you do not have them, contact your local service provider. The
ページ9に含まれる内容の要旨
1. Get started ■ Install the SIM card and battery Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. Always switch the device off and disconnect the charger before removing the battery. Note: Always switch off the power and disconnect the charger and any other device before removing the covers. Avoid touching electronic components w
ページ10に含まれる内容の要旨
6. Align the back cover with the back of the phone, and slide it upwards. Push the back cover up to the top of the phone to lock it (7). ■ Charge the battery Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Check the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-7, A
ページ11に含まれる内容の要旨
■ Normal operating position Your device has an internal antenna. Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life. Copyright © 2006 Nokia. All rights reserved. 11
ページ12に含まれる内容の要旨
2. Your phone ■ Keys and parts Earpiece (1) Loudspeaker (2) Selection keys (3) Navigation key (scroll key) (4) Call key (5), press the call key once to access the recently dialed numbers End key and power key (6), long press to switch the phone on or off, briefly press ends an active call, or exit from any functions Charger connector (7) Headset connector (8) Note: Do not touch this connector as it is intended for use by authorized service personnel only. Warning: The scroll
ページ13に含まれる内容の要旨
■ Standby mode When the phone is ready for use, before you enter any characters, the phone is in the standby mode: Network name or the operator logo (1) Network signal strength (2) Battery charge level (3) The left selection key is Go to (4) for you to view the functions in your personal shortcut list. Select Options > Select options to view the list of available functions that you can add in the options list. Select the function Organise > Move and the location to rearrange the functions of
ページ14に含まれる内容の要旨
3. Call functions ■ Make and answer a call To make a call, enter the phone number including the area code if necessary. The country code should be included, if necessary. Press the call key to call the number. Scroll right to increase or left to decrease the volume of the earpiece or headset during the phone call. To answer an incoming call, press the call key. To reject the call without answering, press the end key. ■ Loudspeaker If available, you may select Loudsp. or Normal to use the louds
ページ15に含まれる内容の要旨
4. Write text You can enter text in predictive text and traditional text input . To use traditional text input, press the key repeatedly until the letter appears. To turn on predictive text input when writing, select Options > Prediction on; to turn it off, select Options > Prediction off. When using predictive text input to enter the word you want, press each key once for a single letter, if the displayed word is the one you want, press 0, and start writing the next word. To change the wor
ページ16に含まれる内容の要旨
5. Menu functions The phone functions are grouped into menus. Not all menu functions or option items are described here. In the standby mode, select Menu and the desired menu and submenu. Select Exit or Back to exit the current level of menu. Press the end key to return to the standby mode directly. To change the menu view, select Options > Main menu view > List or Grid. ■ Messaging The message services can only be used if they are supported by your network or service provider. Settings for te
ページ17に含まれる内容の要旨
Text messages (network service) Select Menu > Messaging > Create message >Text message. Using the short message service (SMS) your phone can send and receive multipart messages, which consist of several ordinary text messages. Invoicing may be based on the number of ordinary messages that are required for a multipart message. Note that using special (Unicode) characters take up more space. The blinking indicates that the message memory is full. Before you can receive new messages, delete som
ページ18に含まれる内容の要旨
When you have a new multimedia message waiting and the memory for the messages is full, blinks and Memory full. Unable to receive msgs. is shown. To receive the message, select OK > Yes and the folder to delete old messages. Flash messages (network service) Flash messages are text messages that are instantly displayed. Select Menu > Messaging > Create message > Flash message. Note: Only devices that offer compatible flash message features can receive and display blinking flash messages. Au
ページ19に含まれる内容の要旨
E-mail application The e-mail application (network service) allows you to access your compatible e-mail account from your phone. Before you can send and retrieve any e-mail, you may need to obtain an e-mail account and the settings required. You may receive the e-mail configuration settings as a configuration message. To write and send an e-mail, select Menu > Messaging > E-mail > Write new e-mail. If more than one e- mail account is defined, select the account from which you want to se
ページ20に含まれる内容の要旨
select Details > Options > Add detail. To copy a contact, select Options > Copy contact. You can copy names and phone numbers between the phone contact memory and the SIM card memory. The SIM card memory can save names with one phone number attached to them. To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speed-dialing number that you want. You can send and receive a person’s contact information from a compatible device that supports the vCar
