Cornelius Remcor 620919507の取扱説明書

ページ1に含まれる内容の要旨

IMI CORNELIUS REMCOR INC g 500 REGENCY DRIVE g GLENDALE HEIGHTS, IL 60139--2268
Telephone (800) 551--4423 Facsimile (800) 519--4423
INSTALLATION INSTRUCTIONS
FOR
DF/ED175-8V “K” STYLE LID KIT
(P/N 629087903 (GRAY) AND 629087905 (BLACK)
THIS “K” STYLE KIT APPLIES TO THE FOLLOWING ICE
MAKERS:
Ice Maker Width
AC and WC Cornelius 322/522 22--in.
Table 1. Loose-Shipped Parts
Item
No. Part No. Name Qty.
1 620043511 Cover, Gray 1
620043512 Cover, Black 1
2 620043506 Lid Assembly 1
3 22127 Bracket 2
4 7

ページ2に含まれる内容の要旨

1. Unpack kit. 2. Place INSULATION STRIP (Item 12) over studs on the baffle and Insert baffle assembly into the adapter lid. 3. Place two (2) sealing cap washers (item 9) over studs and two (2) NYLON WASHERS (item11), then fas- ten in place with two (2) ACORN NUTS (item 8). 4. Set ice maker lid on the top of the dispenser. 5. Using the slotted holes in the lid as a template, drill four (4) .140--in. diameter (9/64--in.) holes at the bottom of the slots (see detail A of Figure 1). Use extreme car

ページ3に含まれる内容の要旨

ICEMAKER VIEW ”A” ENLARGED 4 (8) PLCS. DRILL 9/64 (.140) DIA. HOLES USING BOTTOM OF SLOTTED HOLES (4) PLCS. AS A TEMPLATE 4 3 6 (2) PLCS. 2 1 VIEW ”A” FIGURE 1. DISPENSER ASSEMBLY 3 620919507

ページ4に含まれる内容の要旨

8 BAFFLE AND CAPILLARY 11 AS SHOWN IN PLACE 9 DETAIL Z 12 13 14 10 15 FIGURE 2. BAFFLE 620919507 4

ページ5に含まれる内容の要旨

Y 1.500 Y .625 8 11 9 12 SPLIT 25 in. LONG PLASTIC SLEEVING ICE MAKER 13 10 GROMMET HOLE 6--in. BARE CAP TUBE PULL 25--in. OF CAP TUBE OUT OF ICE MAKER DO NOT STRAGHTEN “S” CLIP FIGURE 3. CAPILLARY TUBE LOCATION 5 620919507