ページ1に含まれる内容の要旨
IMI CORNELIUS INC.
One Cornelius Place
Anoka. MN 55303-6234
Telephone (800) 238–3600
Facsimile (763) 422–3246
FOR
KIT PART NUMBERS 08027 AND 08030
FOR MODEL ED300 DISPENSER AND THE FOLLOWING 30” WIDE ICEMAKER MODEL
SERIES:
MANITOWOC QQ1400C, Q–DUAL
SCOTSMAN CME 806/865/1002/1056
Table 1. Loose-Shipped Parts
Item
No. Part No. Name Qty.
1 29505 Lid Assembly 1
2 22127 Icemaker Mounting Bracket 2
3 50904 RTV. 3Oz Tube 1
4 52946 Manual Ice Fill Cover – Black (08027) 1
52964 Manual Ice Fill Cover – Gr
ページ2に含まれる内容の要旨
2. Place the icemaker adapter lid assembly (item 1) on top of the dispenser and position it flush with the rear and sides of the dispenser as shown in Figure 1. 3. Install the ice baffle on the lid assembly as shown in Figure 3. IMPORTANT: The baffle prevents ice from over–filling the manual fill area during agitation/dispensing with a full storage bin and forcing the manual fill cover off. 4. Using the slotted holes in the lid as a template, drill (4) .147 diameter holes (#26 drill) at the bott
ページ3に含まれる内容の要旨
ICEMAKER SEAL TO ITEM 1 WITH ITEM 3 2 REFER TO POSITION ICEMAKER STEP 5 FLUSH WITH REAR OF LID AND CENTERED ON DISPENSER 30 7 5 3 7 4 1 DRILL Ø .147 HOLES 7 USING BOTTOM OF SLOTTED HOLES IN SEE LID AS A TEMPLATE DETAIL A DETAIL A FIGURE 1. DISPENSER 3 92254
ページ4に含まれる内容の要旨
8 ICEMAKER SHOWN 4 PLC. FOR REFERENCE ONLY 9 4 PLC. BAFFLE (ITEM 6) SHOWN IN PLACE 1 10 4 PLC. 6 FIGURE 2. ED300 BAFFLE KIT 92254 4
ページ5に含まれる内容の要旨
7/16 Ø (6) PLCS 44 3/8 40 3/4 1 13/16 20 3/8 16 1/8 2 9/16 4 1/2 1 5/16 OPENING 12 18 5/8 21 1/4 15 29 3/4 31 1/2 REMOVABLE 8 1/2 SINK TO FRONT OF DRIP TRAY 6 11/16 8 5/8 ON COUNTER TOP 15 TO FRONT TOP OF 3 3/16 DRIP TRAY 3 1/2 22 3/8 RECOMMENDED COUNTER OPENING SIZE 12” X 15” FOR UTILITIES AND BEVERAGE TUBING. OPENING CAN BE LOCATED ANYWHERE WITHIN THE SHADED AREA. FIGURE 3. MOUNTING TEMPLATE 5 92254
