ページ1に含まれる内容の要旨
Flatbottom Series Electric Fryers
(Models 1824E, 2424E, and Combinations)
Installation & Operation Manual
Frymaster, a member of the Commercial Food Equipment Service Association, recommends
using CFESA Certified Technicians.
Price: $6.00
*8195700*
24-Hour Service Hotline 1-800-551-8633
819-5700
March 2003
ページ2に含まれる内容の要旨
Please read all sections of this manual and retain for future reference. NOTICE IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS ENODIS EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART PURCHASED DIRECTLY FROM FRYMASTER DEAN, OR ANY OF ITS AUTHORIZED SERVICE CENTERS, AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS WARRANTY WILL BE VOID. FURTHER, FRYMASTER DEAN AND ITS AFFILIATES WILL NOT BE LIABLE FOR ANY CLAIMS, DAMAGES OR EXPENSES I
ページ3に含まれる内容の要旨
DANGER Improper installation, adjustment, maintenance or service, and unauthorized alterations or modifications can cause property damage, injury, or death. Read the installation, operating and service instructions thoroughly before installing or servicing this equipment. See Chapter 1 of this manual for definition of qualified service personnel. DANGER The front ledge of the fryer is not a step. Do not stand on the fryer. Serious injury can result from slips or contact with the h
ページ4に含まれる内容の要旨
TABLE OF CONTENTS Page# 1 INTRODUCTION........................................................................................1-1 1.1 General..........................................................................................................1-1 1.2 Safety Information........................................................................................1-1 1.3 Installation, Operating, and Service Personnel.............................................1-2 1.4 Definitions...
ページ5に含まれる内容の要旨
FLATBOTTOM SERIES ELECTRIC FRYERS CHAPTER 1: INTRODUCTION 1.1 General Read the instructions in this manual thoroughly before attempting to operate this equipment. This manual covers the Flatbottom Series of electric fryers, including the 1824E family, the 2424E family, and their associated built-in filtration systems. The Flatbottom Series electric fryers feature easy to clean, open frypots constructed of heavy-gauge welded stainless steel. The model designations indicate the s
ページ6に含まれる内容の要旨
DANGER DANGER boxes contain information about actions or conditions that may cause or result in injury to personnel, and which may cause damage to your system and/or cause your system to malfunction. Fryers in this series are equipped with automatic safety features: 1. A high-temperature detection feature (high-limit thermostat) shuts off power to the elements should the temperature controls fail. 2. An optional drain safety switch prevents the elements from being energized if the
ページ7に含まれる内容の要旨
1.5 Shipping Damage Claim Procedure What to do if your equipment arrives damaged: Please note that this equipment was carefully inspected and packed by skilled personnel before leaving the factory. The freight company assumes full responsibility for safe delivery upon acceptance of the equipment. 1. File Claim for Damages Immediately—Regardless of extent of damage. 2. Visible Loss or Damage—Be sure this is noted on the freight bill or express receipt and is signed by the person m
ページ8に含まれる内容の要旨
FLATBOTTOM SERIES ELECTRIC FRYERS CHAPTER 2: INSTALLATION INSTRUCTIONS 2.1 General Proper installation is essential for the safe, efficient, trouble-free operation of this appliance. Any unauthorized alteration of this equipment will void the Dean warranty. DANGER Copper wire suitable for at least 167°F (75°C) must be used for power connections. DANGER The electrical power supply for this appliance must be the same as indicated on the rating and serial number plate located
ページ9に含まれる内容の要旨
2.3 Fryer Installation DANGER The electrical power supply for this appliance must be the same as indicated on the rating and serial number plate located on the inside of the fryer door. DANGER This appliance must be connected to the voltage and phase as specified on the rating and serial number plate located on the inside of the fryer door. DANGER All wiring connections for this appliance must be made in accordance with the wiring diagrams furnished with the equipment. Wiring
ページ10に含まれる内容の要旨
When the fryer is leveled in its final position, install the restraints provided with the unit to limit its movement so that it does not depend on or transmit stress to the electrical conduit or connection. Install the restraints in accordance with the provided instructions (see illustration below). If the restraints are disconnected for service or other reasons, they must be reconnected before the fryer is used. DANGER Single fryers may tip and cause personal injury if not secur
ページ11に含まれる内容の要旨
SINGLE PHASE SINGLE PHASE (NO NEUTRAL) FIELD CONNECTION FIELD CONNECTION L1 L2 L3 NEUTRAL TO L3 L2 L3 L1 1HV 1HV FROM FROM TRANSFORMER 1C1 1C1 2HV 2HV TRANSFORMER 3HV 3HV 1 1C2 1C2 1 4 4 1C3 1C3 5 5 2 2 3 6 3 6 FROM TRANSFORMER FROM TRANSFORMER 3 PHASE 3 WIRE (DELTA) FIELD CONNECTION L2 L3 L1 FROM TRANSFORMER FROM TRANSFORMER 1HV 2HV 3HV 1C1 1C2 1C3 46 12 53 6. Boil out the frypot(s) in accordance with the Boilout procedure in Section 2.3. 2.3 Frypot Boilout Before the fryer is first
ページ12に含まれる内容の要旨
fryers without the built-in boil out option, the power switch is on the front panel. For those with the option, the switches are located inside the door. When this switch is in the If this light does not remain POWER position, this indicator lit when switch is released, will be lit whenever the heating the drain valve is open. elements are engergized. NOTE: The Fryer Reset switch and Boil Out switch are not present in all configurations. 3. The light in the POWER switch should illumina
ページ13に含まれる内容の要旨
6. Press the fryer POWER switch to the OFF position. If the unit is equipped with a boilout switch, press that switch to the OFF position. 7. Add two gallons of cold water. Drain the solution into a suitable container (not the filter pan) and clean any remaining stubborn spots with a brush or scouring pad. WARNING Do not drain water or boilout solution into the filter pan or filter system. Irreversible damage may result if water is allowed into the filtration system and all applica
ページ14に含まれる内容の要旨
FLATBOTTOM SERIES ELECTRIC FRYERS CHAPTER 3: OPERATION AND ROUTINE MAINTENANCE 3.1 Start-up NOTE: If this is the first time the unit is being operated after installation, perform the boil-out procedure found in Section 2.3 of Chapter 2 before proceeding. 1. Fill the frypot with cooking oil up to the lower OIL LEVEL line on the rear of the frypot. If using solid shortening, the shortening must be melted first, then poured into the frypot. 2. Set the operating thermostat or opt
ページ15に含まれる内容の要旨
3.2 General Use of the Fryer 1. For consistent product quality and long-term savings, use a high-quality cooking oil or shortening. 2. When satisfied that the cooking oil/shortening is at the proper cooking temperature, carefully lower a basket of product into the frypot. At the end of the recommended cooking time for the product, lift the basket from the frypot and allow excess oil/shortening to drain back into the frypot before transferring the product to a holding station or the
ページ16に含まれる内容の要旨
3.4 Draining and Manual Filtering of Fryers without Built-In Filtration NOTE: For fryers with built-in filtration, refer to Chapter 4. DANGER Allow oil/shortening to cool to 100ºF (38ºC) or lower before draining into an appropriate container for disposal. For safe, convenient draining and disposal of used cooking oil or shortening, DEAN recommends using the Frymaster Shortening Disposal Unit (SDU). The SDU is available through your local distributor. 1. Turn the fryer POWER
ページ17に含まれる内容の要旨
2. When shutting down for longer than overnight, filter the cooking oil or shortening and then drain it into suitable storage containers or discard it. Press the POWER switch to the OFF position and allow the fryer to cool. Clean the fryer inside and out in accordance with the procedures in Section 3.6. 3.6 Cleaning and Routine Maintenance 3.6.1 Daily 1. Use a clean cloth saturated with a solution of detergent and hot water to remove accumulated carbonized oil/shortening on d
ページ18に含まれる内容の要旨
FLATBOTTOM SERIES ELECTRIC FRYERS CHAPTER 4: UNDER FRYER FILTER (UFF) OPERATION 4.1 General Upon initial installation and before each use, remove all loose parts from the filter, wash the filter pan and loose parts in hot, soapy water, and dry thoroughly. Cooking oil or shortening should be filtered at least daily, or more frequently if cooking is heavy. This maximizes the useful life of the oil or shortening, imparts a better flavor to the product being prepared and minimizes f
ページ19に含まれる内容の要旨
Standpipe to right. Pan outlet to left. 4. Place the leaf filter assembly into the bottom of the filter pan, ensuring that the pan outlet is to the left and the standpipe is to the right as you face the fryer. 5. Sprinkle 16 ounces (2 cups) of Magnasol XL filter powder evenly over the filter screen. DO NOT use other types of filter powder. Ensure crumb pan is centered left to right on front of filter pan. 6. Hang the crumb pan over the front edge of the filter pan, ens
ページ20に含まれる内容の要旨
4.3 Filtering Procedure DANGER THE ON-SITE SUPERVISOR IS RESPONSIBLE FOR ENSURING THAT OPERATORS ARE MADE AWARE OF THE INHERENT DANGERS OF OPERATING A HOT OIL FILTER SYSTEM, PARTICULARLY ASPECTS OF OIL FILTRATION, DRAINING, AND CLEANING OF THE FILTER. 1. Assemble tools to be used for filtering. These are supplied with the filter starter kit: • Brush - used to clean the frypot while filtering. • Clean-Out Rod - long rod used to dislodge debris in the drain valve. • Magnasol XL
