ページ1に含まれる内容の要旨
ATTENDANT OPERATED WHEEL LOCKS
FOR 2000,4000 RECLINER WHEELCHAIRS -
KIT NUMBERS 7400036 AND 7400037
Installation, Assembly and Operating Instructions
NOTE: Check ALL parts for shipping damage. In case 6. Slide the NEW attendant operated wheel lock
of shipping damage, DO NOT use. Contact Carrier/ down locking rod and onto the recliner tube.
Dealer for further instruction.
7. Reposition the anti-rattle on top of recliner tube.
SAFETY SUMMARY 8. Resecure the locking rod to the back tube mount-
ing
ページ2に含まれる内容の要旨
USING THE ATTENDANT ADJUSTING THE ATTENDANT OPERATED WHEEL LOCKS OPERATED WHEEL LOCKS (FIGURE 3) (FIGURE 2) WARNING NOTE: Refer to INSTALLATION WARNING in the SAFETY SUMMARY in this instruction sheet. DO NOT attempt to stop a moving wheelchair with the wheel locks. WHEEL LOCKS ARE NOTE: If wheels are pneumatic, before adjusting or NOT BRAKES. replacing the wheel lock assemblies, ensure that the tires are inflated to the recommended psi. The recom- 1. Perform one (1) of the following: mended psi
ページ3に含まれる内容の要旨
2. Remove the 5/16-inch mounting screw, bushing, CONVERTING FROM PATIENT washer, and locknut that secures the strap and OPERATED WHEEL LOCKS stud assmebly of the patient operated wheel lock (FIGURE 4) to the wheelchair frame. NOTE: Refer to INSTALLATION WARNING in the 3. Secure the rear wheel to the wheelchair frame with SAFETY SUMMARY in this instruction sheet. the axle mounting screw and the 3/4-inch spacer provided. Securely tighten. 1. Remove the existing axle mounting screw and 4. Install
ページ4に含まれる内容の要旨
PARTS LIST QTY ITEM DESCRIPTION 7400036 7400037 1 Attendant Operated Wheel Lock 1 1 2 3/4-inch Spacer 1 1 3 4-3/4-inch Axle Mounting Screw 1 1 4 Locknut 1 1 NOTE: Kit number 7400036 contains Left-Hand wheel lock. 7400037 contains Right-Hand wheel lock. Wheelchair Frame (Reference Only) Rear Wheel (Reference Only)
!" #$%&'()& !* + ) ,- ."!!/ *0!! Form No. 98-101 Part No. 1076130 Rev B (2) - 6/99 Prin
