ページ1に含まれる内容の要旨
GMP
ISO9001
ISO14001
ISO13485
CERTIFIED
MEDICAL POWER WHEELCHAIR
User Manual
WIZZ 888WNL STREAMER 888WB
STREAMER 888WAB STREAMER 888WSB
JETSTREAM-M 888WAM JETSTREAM-L 888WAL
ページ2に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED CONTENTS INTRODUCTION page 2 FEATURE GUIDE page 2 --4 EMI WARNING page 5 – 6 SAFETY INSTRUCTIONS page 7 -- 8 WARNING, CAUTION AND INDICATION LABEL LOCATION page 9 -- 11 PREPARATION FOR USE page 12 -- 13 ADJUSTMENT PROCEDURES page 14 – 16 OPERATION INSTRUCTIONS page 17 – 18 DISASSEMBLY INSTRUCTIONS page 19 – 20 BATTERIES AND BATTERY CHARGING page 21 – 23 TROUBLESH
ページ3に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED INTRODUCTION Congratulations on your purchase of our product. This Powerchair is the ultimate combination of style and comfort. The short wheelbase allows easy maneuverability within the smallest spaces both in and outdoors. The middle/rear drive wheels and electromagnetic brakes provide a safe and comfortable ride. This manual contains important information regarding the safe use of the Powerchair. Please read it carefully before using th
ページ4に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED FEATURE GUIDE STREAMER (888WB/888WSB) (1) Armrest (adjustable with selected (7) width, length, angle and height) (2) Joystick Controller (1) (4) (2) (3) Charging Port (4) Captain Seat Assembly (3) (8) (5) Footrest (adjustable with selected length and angle) (10) (9) (6) Front Castor (8”） (7) Headrest (adjustable with selected (5) (11) height) (8) Backrest (adjustable with selected angle) (12) (9) Seat Supporting Post (6) (10) Chass
ページ5に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED FEATURE GUIDE JEETSTREAM-M (888WAM) (1) Headrest (adjustable with selected (1) height) (2) Backrest (adjustable with selected (4) (2) height) (3) (3) Joystick Controller (10) (4) Armrest (adjustable height, width and angle selection) (5) On-Board Charger w/ retractable cord (6) (6) Footrest (5) (7) Front Castor (8) Rear Drive Wheel (9) (9) Anti-Tip Wheel (10) Reclining Pillow-Top Seat (8) (7) Fig. 4 JETSTREAM-L (888WAL) (1) (1
ページ6に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED EMI WARNING ELECTROMAGNETIC INTERFERENCE (EMI) FROM RADIO WAVE SOURCES Medical Power Wheelchairs (Hereinafter referred to as “Powerchair”) may be susceptible to electromagnetic interference (EMI), which is a kind of interfering electromagnetic energy (EM) emitted from sources such as radio stations, TV stations, amateur radio (HAM) transmitters, two-way radio, and cellular phones. The interference (from radio wave sources) can cause the P
ページ7に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED EMI WARNING POWERCHAIR ELECTROMAGNETIC INTERFERENCE (EMI) Because EM energy rapidly becomes more intense as one moves closer to the transmitting antenna (source), the EM fields from hand-held radio sources (transceivers) are of special concern. It is possible to unintentionally bring high levels of EM energy very close to the Powerchair’s control system while using these devices. This can affect Powerchair movement and braking. Therefore,
ページ8に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED SAFETY INSTRUCTIONS Please use your Powerchair often and let it expand your horizons. The more mobility your Powerchair brings, the happier we will be! But, with all things, observing a few rules will ensure safe maneuvering. So please… (1) Do not drive the Powerchair without reading this instruction manual. (2) Do not exceed the safe climbing maximum angle (Table 2). (3) Do not use the joystick in an erratic manner when going up or dow
ページ9に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED SAFETY INSTRUCTIONS (20) Whenever a center bolt of the wheel assembly has been loosened, please replace a specified new bolt from authorized providers and secure with a torque of 240 ± 5 kg-cm together with Loc-tite 271 adhesive (or equivalent). (21) When proceeding up any incline, please move the seat to the most forward position or if you have the deluxe seat, make sure that it is in the 90 degree (upright) position. Remember! Giv
ページ10に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED WARNING, CAUTION AND INDICATION LABEL LOCATION To ensure your safety and protect the Powerchair from damage, please find out and read the content of labels listed below before your first ride. Joystick Controller Fig. 4 Chassis Shroud of WIZZ (888WNL) or Fig. 5 ~9~
ページ11に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED WARNING, CAUTION AND INDICATION LABEL LOCATION Chassis Shroud of STREAMER (888WAB) or Fig. 6 Chassis Shroud of STREAMER (888WB/888WSB) or Fig. 7 ~10~
ページ12に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED WARNING, CAUTIO N AND INDICATION LABEL LOCATION Chassis Shroud of JETSTREAM-L/M (888WAL/888WAM) or YELLOW - CHARGING GREEN - CHARGED Fig. 8 ~11~
ページ13に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED PREPARATION FOR USE The Powerchair has many features designed to give the user maximum comfort. Adjustments can be made to the following parts of the Powerchair: (1) Footrest can be lengthened outward from the main frame in three positions. 0 0 (2) Footrest angle can be adjusted from 0 to 60 . (3) Armrests can be set at different angles. (4) Armrests can be set at different lengths. (5) Arms can be adjusted in height. (6) Arms can be adju
ページ14に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED PREPARATION FOR USE NOTE: Before using the Powerchair for the first time, be sure the batteries have been connected. Charge the Powerchair for at least 6-8 hours prior to first time use. NOTE! Maximum efficiency can only be achieved with sufficient battery power and adequate run-up distance. WARNING! Be aware that the angle of incidence should be approached around 90° to ensure safety and stability. PROGRAMMABLE CONTROLLER WIZZ
ページ15に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED ADJUSTMENT PROCEDURES FOOTREST ADJUSTMENTS (Fig. 9) STREAMER (888-WB/WAB/WSB) WIZZ (WNL) LENGTH (3) Pull out the safety pin (1) from the first hole in the footrest slide tube (2), adjust the footrest slide tube and refit the safety pin in the hole at the (1) (2) desired length. Fig. 9 ANGLE Release the lock nut and adjust the bolt under the footrest (3) to adjust the footrest angle. Whe
ページ16に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED ADJUSTMENT PROCEDURES FOOTREST ADJUSTMENTS (Fig. 11) JETSTREAM-L/M (888-WAL/WAM) LENGTH (1) (2) Pull out the safety pin (1) from the first hole in the footrest slide tube (2), adjust the footrest slide tube and refit the safety pin in the hole at the (3) desired length. ANGLE Fig. 11 Release the lock nut and adjust the bolt under the footrest (3) to adjust the footrest angle. When the angle
ページ17に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED ADJUSTMENT PROCEDURES JOYSTICK CONVERSION (right to left or left to right) Beneath each of the arm pads there is a hand knob [Fig.10 (2)] used to adjust the length of the arm pad and secure the arm pad to the arm rest assembly. Remove the hand knob completely and slide off the arm pad. You can now exchange the joystick controller from one side to the other. SEAT HEIGHT ADJUSTMENTS (Fig.13) WIZZ (888WNL): The four seat supporting posts unde
ページ18に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED OPERATION INSTRUCTIONS (1) (2) (7) (5) (4) (3) (6) (8) Fig. 14 GETTING READY TO KNOW THE JOYSTICK CONTROLLER (VSI 50) On / Off Button (1) This button turns the joystick controller (hereinafter referred to as 1 VSI) on and off. Do not use this button to stop the Powerchair, except in an emergency. Battery Gauge (2) 2 This is a 10-segment display, which indicates if the VSI is switched on and gives the state of charge of
ページ19に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED OPERATION INSTRUCTIONS Charging Port (8) for Off-Board Charger Only plug into this port with the qualified charger certified by the original manufacturer of the Powerchair. This port should not be used as a power supply for any other electrical devices. The behavior against the two statements as above will void the warranty of the Powerchair. GETTING READY TO DRIVE STEP 1 Depress the On / Off Button, then the VSI will turn on after the Ba
ページ20に含まれる内容の要旨
GMP ISO9001 ISO14001 ISO13485 CERTIFIED DISASSEMBLY & ASSEMBLY INSTRUCTIONS COMPONENTS FOR WIZZ 888WNL (1) (5) (1) Reclining captain seat assembly with arm assembly. (2) (2) Chassis shroud. (3) (3) Rear Chassis Assembly. (4) Batteries. (5) Front Chassis Assembly. (4) Fig. 15 COMPONENTS FOR STREAMER 888WB/WAB/WSB (1) Captain seat assembly with (2) (1) arm assembly. (2) Chassis shroud. (4) (3) Chassis Assembly. (4) Batteries. (3) (5) (5) Anti-tip Wheel Assembly.
