ページ1に含まれる内容の要旨
Synergy TRU-Balance
BASIC OPERATION INSTRUCTIONS
Po
Dynamic
Controller
ACN# 088 609 661
ACN# 088 609 661
ページ2に含まれる内容の要旨
2 Basic Operation Instructions SAFETY GUIDELINES WARNING! An authorized Pride Provider or a qualified technician must perform the initial setup of this product and must perform all of the instructions in this manual. The symbols below are used throughout this owner's manual and on the controller to identify warnings and important information. It is very important for you to read them and understand them completely. WARNING! Indicates a potentially hazardous condition/ situation. Failure to follo
ページ3に含まれる内容の要旨
Basic Operation Instructions 3 TABLE OF CONTENTS LABEL INFORMATION .................................................................... 4 INTRODUCTION ................................................................................. 5 DYNAMIC CONTROLLER ............................................................... 7 PRECAUTIONARY GUIDELINES ................................................. 7 OPERATING THE DYNAMIC CONTROLLER ........................ 11 CONTROLLER CONNECTOR .....................
ページ4に含まれる内容の要旨
4 Basic Operation Instructions LABEL INFORMATION PRODUCT SAFETY SYMBOLS The symbols below are used on the controller to identify warnings, mandatory actions, and prohibited actions. It is very important for you to read and under- stand them completely. Read and follow the information in the owner’s manual. Avoid exposure to rain, snow, ice, salt, or standing water whenever possible. Maintain and store in a clean and dry condition. EMI-RFI - This product has been tested and passed at an immunity
ページ5に含まれる内容の要旨
Basic Operation Instructions 5 INTRODUCTION WELCOME to Pride Mobility Products Corporation (Pride). The product you have purchased combines state-of-the-art components with safety, comfort, and styling in mind. We are confident that the design features will provide you with the conveniences you expect during your daily activities. Understanding how to safely operate and care for this product should bring you years of trouble free operations and service. Read and follow all instructions, warnings
ページ6に含まれる内容の要旨
6 Basic Operation Instructions NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact us and we will be glad to send you a new one immediately. My authorized Pride Provider Is: Name: _____________________________________________________ Address: ____________________________________________________ Phone Number: ______________________________________________ Purchase Date: _______________________________________________ Dynamic Controller www.pridem
ページ7に含まれる内容の要旨
Basic Operation Instructions 7 DYNAMIC CONTROLLER The Dynamic controller is a modular electronic controller system that allows you to operate your power chair. It is designed to allow the user to have complete control over chair movement and speed. The controller is available in both 50-amp and 60-amp configurations, and has been pre-programmed to meet a typical user’s needs. The program is set using either a personal computer with software provided by the controller manufacturer or with a hand
ページ8に含まれる内容の要旨
8 Basic Operation Instructions Electromagnetic and Radio Frequency Interference (EMI/RFI) WARNING! Laboratory tests have shown that electromagnetic and radio frequency waves can have an adverse affect on the performance of electrically-powered mobility vehicles. Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile two-way radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters, wireless computer links, micro
ページ9に含まれる内容の要旨
Basic Operation Instructions 9 Dynamic Controller Features Figure 1 provides information on the Dynamic controller components and connections. Use this diagram to familiarize yourself with the function and location of each component before using the Dynamic controller. The following functions are available with the Dynamic controller: ! Joystick Control The joystick is used to control the direction and speed of the power chair. ! Speed Adjustment The user can increase or decrease the maximum spe
ページ10に含まれる内容の要旨
10 Basic Operation Instructions On/Off Key Press to power on or Battery Condition Meter off the power chair and Indicates the approximate amount of controller. battery life using color-coded LEDs. Speed Increase Key Speed Decrease Key Used to increase the Used to decrease the speed setting. speed setting. Horn Key Activates a warning horn. Speed Setting Indicator Series of five colored LEDs Attendant Control which display the speed Indicator setting. Indicates when the optional Service Indicato
ページ11に含まれる内容の要旨
Basic Operation Instructions 11 OPERATING THE DYNAMIC CONTROLLER The Dynamic controller is used to operate your power chair and all of its components. The Dynamic controller consists of (see figure 2): 1. joystick 2. keypad 3. off-board charger/programming socket 4. controller connector 5. power module 2 1 3 4 5 Figure 2. Dynamic Controller Joystick Control The joystick controls the direction and speed of your power chair. When you move the joystick from the neutral (center) position, the elect
ページ12に含まれる内容の要旨
12 Basic Operation Instructions Figure 3. Dynamic Controller 4-key Keypad Figure 4. Dynamic Controller 7-key Keypad Dynamic Controller www.pridemobility.com
ページ13に含まれる内容の要旨
Basic Operation Instructions 13 Figure 5. Dynamic Controller 8-key Keypad Figure 6. Dynamic Controller 9-key Keypad www.pridemobility.com Dynamic Controller
ページ14に含まれる内容の要旨
14 Basic Operation Instructions Keypad The keypad is located directly in front of the joystick. It contains keys that you will use to control your power chair. See figure 2. On/Off Key The on/off key turns the system on and off. WARNING! Unless faced with an emergency situation, do not use the on/off key to stop the chair. This will cause the power chair to stop abruptly. WARNING! Always turn the power off when you are stationary to prevent unexpected movement. NOTE: If the joystick is not in th
ページ15に含まれる内容の要旨
Basic Operation Instructions 15 Speed Keys There are two keys that control the speed. Press the speed increase key to in- crease the speed. Press the speed decrease key to decrease the speed. The speed setting is displayed on the speed setting indicator. If your power chair was pro- grammed with a drive profile, contact your authorized Pride Provider for more information. NOTE: We recommend that the first few times you operate your power chair, you set the speed to the slowest setting until you
ページ16に含まれる内容の要旨
16 Basic Operation Instructions Right/Left Turn Indicator Keys (For Optional Equipment) The right/left turn indicator keys toggle either the left or right turn indicators. Press once to turn on and press again to turn off. You can also turn off the selected turn indicator by pressing the opposite indicator key or the hazard key. Light Key (For Optional Equipment) The light key turns the headlights/taillights on and off independent of other indicators. Hazard Key (For Optional Equipment) The haza
ページ17に含まれる内容の要旨
Basic Operation Instructions 17 To unlock the Dynamic controller: 1. While the Dynamic controller is locked, press the on/off key to turn on the controller. All LEDs will flash briefly. The LEDs will then slowly ripple from right to left. 2. Press the horn key twice before the LED ripple has completed, approximately 10 seconds. The controller is now unlocked. NOTE: If you do not press the horn key twice before the countdown is complete, the system will beep and the Dynamic controller will turn i
ページ18に含まれる内容の要旨
18 Basic Operation Instructions SLEEP MODE (IF ENABLED) The power chair controller features a sleep mode. Sleep mode is a built-in circuit that will automatically shut off the main power if the joystick is not moved in any direction for a period of time. This time factor is programmed into the controller. To restore power and continue, push any key on the keypad. OUT OF NEUTRAL AT POWER UP (OONAPU) Your power chair joystick is equipped with Out Of Neutral At Power Up (OONAPU). If you power up th
ページ19に含まれる内容の要旨
Basic Operation Instructions 19 Error Code Probable Cause Possible Solution 1 Possible stall timeout or user error Release the joystick. 2 Battery Fault Check the batteries and cables. Try to charge the batteries. The batteries may need to be replaced. 3 Left Motor Fault Check the left motor, connections, and cabling. 4 Right Motor Fault Check the right motor, connections, and cabling. 5 Left Park Brake Fault Check the left park brake
ページ20に含まれる内容の要旨
Pride Mobility Products Corporation 182 Susquehanna Avenue Exeter, PA 18643-2694 USA Pride Mobility Products Company 380 Vansickle Road Unit 350 St. Catharines, Ontario L2R 6P7 Canada Pride Mobility Products Ltd. 32 Wedgwood Road Bicester, Oxon OX26 4UL UK Pride Mobility Products Australia Pty. Ltd. 21 Healey Road Dandenong, 3175 Victoria, Australia Pride Mobility Products Italia S.r.l. Via del Progresso - ang. Via del Lavoro Loc. Prato della Corte 00065-Fiano Romano (RM) Pride Mobility Produc
