ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
Automatic Drum Washing Machine
LSE-1200 S
0020505090C
ページ2に含まれる内容の要旨
Specification Content Pre-usage Power Source Maximal Working Current Ampere (A) Part Names ………………………………1 Tap Water Pressure Megapascal(Mpa) Precaution……………….2-4 Waterproof Degree Installation………………5-6 Washing Power Watts (W) Control Panel ……..7-8 Spining Power Watts (W) Display Screen …………….….9 Rating Laundry Quantity Kilogram (kg) Using Process Velocity Revolutions /minute(r/min) Washing Procedure Program Setting…..10-11 Drying Po
ページ3に含まれる内容の要旨
Codes on Display Screen Part names Remaining time 1 hour and 16 minutes Detergent dis- Remaining time 1 minute Programme selector tribution drawer Setting washing temperature at 60 Control panel Setting washing without heating process Display Setting no Spin process Function button Setting dehydration revolutions 800r/min Code for manual selection of weight, when clothes are less than 1kg Door Door handle Code for manual selection of weight, when clothes are almost full of the roller Start-
ページ4に含まれる内容の要旨
Precaution Wiring Circuit . 2 2 2 2 2 2 1 1 1 1 1 1 X1 JC1 1- MRC 1 JB7 2 2- MRL 3 3-MRN The power cable must be replaced Program Selector Filter by a qualifed engineer; if not, please JB9 L Drying Switch G VCC consult the Service Center. JB6 N JC5 JC6 JC4 Heating Temperature Sensor JC2 Drying Temperature Sensor 1 2 Pressure Switch JC3 X4 Motor 6. The door of the washing machine will 5. Do not use inflammable detergents or become very hot during the water-heating dry-cleaning agents.
ページ5に含まれる内容の要旨
precaution 8. The washing machine must not be installed outside or in a very humid areaas drops of water may form on electricalcomponents, If drops of water have splashed on the warming on the washing machine,leave it dry before use. 10. Keep away from heat sources and di- rect sunlight to prevent plastic and rubber components from aging. 1. Before starting the wash programme, 2. Keep the door slightly open when the ensure that the washing machine is washing machine is not being used
ページ6に含まれる内容の要旨
Precaution Trouble-shooting 3.Do not place heavy objects or container 4. Do not wash articles containing with water on the washing machine,so as to polystyrene or similar elastic materials. The following problems are not always caused by faults, Before calling the Service prevent deformation of the flat surface and Center, please check to see if the faults can be self-corrected. plastic parts. Problem Possible caus e l Poor connection to power supply l Power failure The
ページ7に含まれる内容の要旨
Maintenance Installation Remove all the packing materials (including the EPS base)to prevent vibration during use, as 5. Rinse intake pipe joint and the inlet valve gauze filter shown in the right picture.Upon opening of the frequently in case foreign substances in water blocks package, water drops may be seen on the plastic the water pipe connection. bag and the porthole. This is normal phenomenon resulting from water test in the factory. Check attachments and
ページ8に含まれる内容の要旨
Maintenance
ページ9に含まれる内容の要旨
Other functions Installation 1. Power off memory function: In case there is power breakdown or the plug accidentally falls out of the outlet when the machine is in operation, this 1. Place the threaded end of the water inlet hose on machine can memorize the running of the program so that it continues with the water inlet valve connector. threaded end of its work after the resume of power. 2. The machine can memorize the preset condition of precious washing, which 2. Check that
ページ10に含まれる内容の要旨
29 Control Panel Laundry Operation Illustration Control Panel (LSE-1200 S) Illistration of the washing operation process with "cotton" as an (The other processes resemble with this) example 1.Joint the intake pipe and the drain pipe,switch the program button to the position of closedown indication,and plug in the pin. 2.Open the door of the washing machine,trim up the cotton clothing that require washing and put them into the cylindrical washer evenly. 3.Draw out the detergent dispensi
ページ11に含まれる内容の要旨
Control Panel Flexible Applications F drying button Saving water,electric power and detergent is not only good for Press this button and the drying icon of the display screen brightens.When the environment protection but also good for saving the disbursements. program finally comes to the drying process,the drying icon twinkles,indicating the If you wash many clothes together,please separate the clothes that are easy to lose color. start of the drying program.If you want t
ページ12に含まれる内容の要旨
29 Display Screen Washing Methods The content of the displayscreen spin speed spin speed indicator content of program digital display area warning 4. Set the washing temperature and spin speed If you don’t need heating,press the temperature-choosing key to the “ ”position.If off cotton synthetic cashmere you need heating choose proper washing temperature according to your requirement. If you don’t need spin,press the speed choosing key to the “0” position.If you need anti-vi
ページ13に含まれる内容の要旨
Program Setting Washing Methods suggested temperature suggested speed range recommended 1. Laundry loading Open the door, put in speed program setting mode range temperature laundry (rpm) the laundry inside. Close the door tightly. Load Reference Notes:1) When using the washing Jeans machine the first time, let it run un- (appr 800g) -- ,30,40, Overalls cotton cotton loaded for one program to prevent (cotton appr 1000g) Ladies pajamas 60,90 fabric (appr 200g)
ページ14に含まれる内容の要旨
Preparation Program Setting additional functions attachable to the program Usage of detergent 1.Power supply 2.Water supply Program setting mode extra pre- Plug in the power supply 220-240 V~/50HZ Turn on the tap ensure that the water in clear. delay drying eco rinse wash Caution:Before staring the washing machine turn on the water faucet to ensure the water faucet and the water inlet hose are cotton connected correctly and do not leak synthetic cashmere silk 3.Detergent selection 4.Laundry tr
