ページ1に含まれる内容の要旨
WASHING MACHINES
TSE 1262 V - TSE 1062 V
Instructions manual
146 4869 02 - 02/05
ページ2に含まれる内容の要旨
CONTENTS FOR THE USER ...............................................3 FOR THE INSTALLER .................................. 13 Warnings..........................................................3 Warnings ...................................................... 13 Usage .........................................................3 Precautions against frost ............................3 Technical characteristics ........................... 13 Scrapping ..................................................
ページ3に含まれる内容の要旨
A. FOR THE USER 1. WARNINGS Keep this user’s manual with your washing machine. If you sell your washing machine or give it away, make sure that it is accompanied by its user’s manual. The new user can then be informed of how the washing machine operates and read re- levant warnings. These warnings have been written for your safety and for the safety of others. Please read these comments care- fully before installing and using your washing machine. Thank you for your attention. 1.1. Usage Swit
ページ4に含まれる内容の要旨
2. WASHING MACHINE DESCRIPTION 1 2 1 - Control panel 2 - Lid opening handle 3 - Leveling screws 4 - Filter door 5 - Lever for moving the washing machine 5 4 3 2.1. The detergents dispenser Symbols 1 - prewash 3 - softener 2 (do not exceed the MAX mark) 1 3 2 - wash 4 - softener overflow (if overfilled) 4 2.2. The control panel 1 - «Delay» pushbutton 5 - «Start/Pause» pushbutton 2 - «Super rinse» pushbutton 6 - Program and information display lights 3 - «Quick wash» pushbutton 7 - Spinning spe
ページ5に含まれる内容の要旨
3.4. Choice of the spinning speed 3. HOW TO DO A WASH ? Before the first wash in your washing machine, we re- The maximum spin speed is de- commend that you should do a preliminary wash at fined as a function of the type of 90°C with detergent but without any washing to clean washing and depending on the the tub. selected program. However, you can reduce the 3.1. Loading the washing speed or choose the rinse hold*, drain*, or spinning suppression* • Lift the machine cover. positions. • Open the
ページ6に含まれる内容の要旨
When the washing cycle begins, the «washing» light is on. 3.7. Action during a programme 3.7.1. Adding of laundry Press the Start/Pause pushbutton : the corresponding light flashes as long as the programme is paused. You will then hear a double "click" in the locking device when the cover opens. Press the same pushbutton again to resume the programme. For reasons of safety, you cannot open the cover if the temperature of the washing water is too high. 3.7.2. Modifying the current programme Bef
ページ7に含まれる内容の要旨
4. PROGRAMS TABLE The following does not show all possibilities, but simply the most frequent settings. Program Load Possible Tempera- Approximate Washing type options tures consumptions °C liters kWh min COTTONS 5 kg Delay 90 63 2,10 145 White or color, for exam- Super rinse E 60 (*) 45 0,95 145 ple normally dirty work Quick wash 40 58 0,65 120 clothes, bed linen, table (NOT on E 60°) linen, underwear, towels. Prewash SYNTHETICS 2,5 kg Delay cold 57 0,15 70 Synthetic fabrics, under- Super rins
ページ8に含まれる内容の要旨
5.3. Detergents and additives 5. WASHING GUIDE Only use detergents and additives suitable for use in a 5.1. Sorting and preparing your washing machine. Read the manufacturer's instruc- tions and respect sections 2.1 and 3.2. washing Powder detergents can be used without restriction; li- • Sort the washing by type and care symbol (see quid detergents should be poured either in the propor- chapter 5.4: International symbols for care of texti- tioning bowl directly in the drum, or in the wash le
ページ9に含まれる内容の要旨
5.4. International symbols for care of textiles NORMAL WASH Wash at Wash at Wash at Wash at 95°C 60°C 40°C 30°C Delicate Do not wash wash by DELICATE hand WASH JAVEL WATER Bleaching with chlorine (Javel water) allowed Do not bleach with chlorine (Javel water) (only cold and with a dilute solution) IRONING High temperature Average temperature Low temperature Do not iron (max 200°C) (max 150°C) (max 100°C) DRY Dry cleaning Dry cleaning Dry cleaning Do not dry clean CLEANING (all usual solvents)
ページ10に含まれる内容の要旨
6.4. The drain filter 6. CARE AND CLEANING Clean the filter at the bottom of the washing machine * Do not do any cleaning operation until you have regularly. The "filter" light comes on if the filter is blo- unplugged the washing machine. cked. In this case clean it immediately. If you wash washing that is very fluffy, clean it after each wash. 6.1. Descaling the washing machine • Open the door, with a screwdriver for example: Normally there is no need to descale the washing ma- chine if the
ページ11に含まれる内容の要旨
7. OPERATING PROBLEMS Many checks have been carried out during the manufacture of your washing machine. However, if you face a problem with its operation, please read the following sections before calling the After Sales service. Symptom Cause The washing machine will not start or will not fill: • the washing machine is not correctly connected, the elec- trical installation is not working, • the cover of your washing machine and the drum flaps are not correctly closed, • you did not control th
ページ12に含まれる内容の要旨
Symptom Cause The «DRUM POSITIONNING»* light** is not on at the • the drum could not reach the right position due to a persis- end of the cycle: tent unbalanced mass; turn the drum manually. ** *** The «End»* light flashes 4 times : • the cover is not correctly closed. The «End»* light ** flashes 2 times***: • the drain filter is blocked, • the drain pipe is blocked or kinked, • the drain pipe is too high (see «installation»), • the drain pump is blocked, • the installation siphon is blocked.
ページ13に含まれる内容の要旨
B. FOR THE INSTALLER 1. WARNINGS Please read the instructions in the "electrical connec- • This washing machine is heavy. Take care when tions" chapter carefully before connecting your moving it. washing machine. You must remove the packing on the washing machine After installing your washing machine, make sure that before use. Failure to remove all transport protection it is not standing on its electrical power supply cable. devices can cause damage to the washing machine or When your
ページ14に含まれる内容の要旨
If you want to keep your 3. INSTALLATION washing machine aligned with 3.1. Unpacking the adjacent furniture, you can cut the pipe support strip at the Packing used to protect internal parts of back of your washing machine. the washing machine during transport Leave the two side closers in must be removed before the washing place. machine is put into service for the first ti- me. 3.2. Position Remove all packing from the washing machine. Tilt the Put the washing machine on a flat hard floor in a
ページ15に含まれる内容の要旨
You cannot prolong the water inlet pipe. If it is too short, buy a longer pipe provided for this purpose. 3.6. Drain The drain siphon must be pla- ced inside a drain pipe (or in a washbasin) at a height of between 70 and 100 cm. Make sure that it cannot fall. • Important: the drain pipe must never be prolonged. If it is too short, call a professional. 3.7. Electrical connection You can only connect this washing machine to 230 V single phase power supply. Check rating of the fuse line: 10 A at
ページ16に含まれる内容の要旨
From the Electrolux Group. The world’s No.1 Choice. The Electrolux Group is the world largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vaccum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.
