ページ1に含まれる内容の要旨
PARTS &
SERVICE Manual
AUTO SPARKLE
SAP MODEL NO DESCRIPTION
3775 AUTOSPARKLE-110V,APWH.W.PUMP(BARBA,CURAC
ページ2に含まれる内容の要旨
CONTENTS S No DESCRIPTION PAGE No 1 SPECIFICATIONS 3 2. AUTOSPRAKLE FEATURES 6 3. CONTROL & FUNCTIONS 6 4. WIRING DIAGRAM 10 5. PROGRAM TIMING 12 6. EXPLODED VIEWS 15 7. PARTS LIST 18 8. FAULT FINDING-GUIDE 20 This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to mod
ページ3に含まれる内容の要旨
Specifications 1 .Model Description AUTOSPARKLE 2. Machine Type Top Loading fully Automatic Agitator wash 3. Capacity 5 Kg. 4. M/c Wt. 38 Kg. 5. M/c Dimension 570 mm (W) x 590 mm (B) x 1000 mm (H) 6. Cabinet Finish Pre painted Steel 7. No of programs 1 9 8. Program Select
ページ4に含まれる内容の要旨
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001
ページ5に含まれる内容の要旨
AUTOSPARKLE - FEATURES : ? Spin Basket - P.P. Material ? Easy spin basket removal is possible ? Hose less bleach inlet system ? Single Pressure switch hose. ? LID switch control for Agitate/Spin operations. (8 Bit controller) ? Tub ring mounting with out screws A LOOK AT THE CONTROL PANEL... The following are the knobs/switches available at the panel 1 Power ON/OFF Switch 2. Water level selector 3. Course Select 4. Program Select 5. Start/Pause Button In addition to the a
ページ6に含まれる内容の要旨
This switch is basically a ON/OFF switch controlling the supply to the machine, by pressing this switch, the machine is turned ON. To Switch off the machine, press the switch again. Machine operation stops automatically at the end of the cycle and this switch will still remain in ON position Similar To ALPHA model and the user has to switch it OFF before removing the clothes from the spin basket. WATER LEVEL SELECTOR This is similar to our existing Load Selector with the difference that the pre
ページ7に含まれる内容の要旨
COURSE SELECT This feature enables the user to select the various combination of SOAK, WASH, RINSE and SPIN. The Selection is effected by pressing this Course Select button and indicated by the glowing of the corresponding LED indicator in the panel. The default setting is WASH, RINSE and SPIN i.e. whenever the Power Switch is switched ON, these 3 processes will be selected by default and the corresponding LED lamps will glow. As the Course Select button is pressed further, the other selections
ページ8に含まれる内容の要旨
The timing sequences of this individual cycle are enclosed for your ready reference. OPERATING INSTRUCTIONS: 1. Add detergent and load the clothes as usual. 2. Connect the Fill Hose and Power cord to the appropriate points. 3. Place the Drain Hose on the ground. 4. Switch on the machine. Set the Water level and Water inlet Selector (as applicable) to the desired settings. 5. Select the appropriate Course and Program. 6. Press the Start button to commence the operation. 7. At the completio
ページ9に含まれる内容の要旨
soaking time is 32 minutes with the machine agitating for the first 2 minutes. This is followed by 20 seconds agitation and 3 minutes soak cycle for the remaining 30 minutes. *ERROR SIGNALS: During operation, if any malfunction or misoperation occurs, the timer automatically indicates the same to he user through an appropriate error signal. The various possible errors during operation and the type of error signal along with the remedies are listed in the table as below CAUSE SIGN
ページ10に含まれる内容の要旨
Wiring Diagram This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001
ページ11に含まれる内容の要旨
PROGRAM TIMIMG (TIME IN MINUTES) OPERATION Sequence Wash Program NORMAL SPEEDY DELICATE HEAVY Fill - - - - Agitronic Soak Soak/Agitation 32 - 32(By 32(By selection) selection) Wash Agitation 14 8 4 4 Soak/Agitation - - 4 4 Agitation - - 2 14 RINSE Drain,Max 4 4 4 4 SIS 2 2 2 - Spin - - - 2 Fill - - - - Agitation - - - 4 Drain,Max - - - 4 SPIN SIS 2 2 4 2 Spin 8 4 - 8 TOTAL TIME(Excluding fill) 72 30 26 56 Note: 1.Fill time not included in the above table. 2.Agitation rate for Normal,speedy
ページ12に含まれる内容の要旨
USER INSTRUCTIONS ? Load Laundry ? Fill required amount of Water Manually ? Add Detergent and Adjuncts as required ? Program the machine (Normal/Wash) ? Press Start ? M/C Washes as per the program and stops ? Water filling should be controlled manually. The in built pressure switch is provided to ensure minimum water level of 25 Ltrs. thus avoiding agitation without water. ? Fill fresh water for rinsing operation. ? Program the machine (Normal/Rinse and Spin) ? Press Start ? Machine Rinses as pe
ページ13に含まれる内容の要旨
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001
ページ14に含まれる内容の要旨
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001
ページ15に含まれる内容の要旨
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001
ページ16に含まれる内容の要旨
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001
ページ17に含まれる内容の要旨
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Modified parts list follows This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001
ページ18に含まれる内容の要旨
PARTS LIST Part Code Description 3775 P0132003300 ACCEPTANCE STICKER 1 P014290020A ADHESIVE TAPE - WHIRLPOOL 1 P010110010E AGITATOR 1 P010113020A BALANCE RING ASSY (APWH) 1 P0129130100 BASKET ASSY. COMPLETE - AGI PL5 1 S012620010A BEARING-BALL SEALED 2 P012900010A BRACKET SUSPENSION 1 P010111500D BRACKET-CAPACITOR 1 P010111140B BRAKE & ARM ASSY. 1 P0125210100 BUSH - CABINET 1 P010111400A CAM RING-SPLUTCH 1 P010111520B CAM-SPLUTCH 1 P0168160200 CAPACITOR- 110V/50HZ 1 S014010100A CLAMP - ID 13.9/1
ページ19に含まれる内容の要旨
Part Code Description 3775 P014320020A HOUSING - FIXED FOOT 1 P0143200600 HOUSING ADJUSTABLE FOOT 1 P012960190E LID - BOTTOM (A/S) - APWH 1 P012960180G LID (TOP) (A/S) - APWH 1 P012960170C LID ASSEMBLY WITH GLASS(A/S)APWH 1 P012960040B LID GLASS - A/S 1 P0129901700 LID PAD - A/S 1 S0116300100 LOCK WASHER - M8 (BRAKEBAND&CLUTCH ARM) 1 P010111130C LOCK-SOLENOID BRAKE ARM 1 P012911040A MOTOR PLATE WITH BEARING 1 P0168160300 MOTOR (110V) - WW 1 P0173110500 MOTOR PLATE ASSY - 110V with Pump 1 P01681
ページ20に含まれる内容の要旨
Part Code Description 3775 S0140000100 TWIST CLIP 2 P0168800100 USER MANUAL - A/S 110V, 1 S011600070A WASHER 2 S0116001900 WASHER - 4.75 X 12 X 1.2 THK. 2 S0116001600 WASHER (13 X 23 X 1) 1 S0116001800 WASHER (9 X 17 X 1.6) 1 P010171140E WASHER FAUCET M/C END 1 S0116000100 WASHER-PULLEY 1 P0168310200 WATER INLET VALVE (110V) 1 S0140000200 WH / HOSE HOLDER 2 P0168160500 WIRING HARNESS (A) 110V,(WITH PUMP) 1 This document is only intended for qualified technicians who are aware of the respective s
