ページ1に含まれる内容の要旨
Instructions for Use
Washing machine
ページ2に含まれる内容の要旨
187352 Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. Some of the materials may be recycled, others deposited or decomposed. To avoid pollution of environment, once your appliance is no longer useful, take it to your local authorized
ページ3に含まれる内容の要旨
Description of washing machine 1. Front panel 5. Adjustable legs 2. Detergent dispenser 6. Water outlet hose 3. Door 7. Water inlet hose 4. Filter lid 8. Mains power cable Technical information Dimensions (w x d x h): (depending on model) 600 mm x 600 mm x 850 mm Depth with door open: 106 cm Weight (net): 90 kg Nominal voltage: 230 V, 50 Hz Power: 2300 W / 2200 W (depending on model) Max. load: 6 kg Power socket: (230 V, 50 Hz, 10 A) Water pressure: min. 0,05 MPa, max. 0,8 MPa Fuse: 10 A 3 1
ページ4に含まれる内容の要旨
187352 Cautions Be sure to remove transport brackets prior first use of the appliance. • Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer ’ s warranty! When connecting your washing machine to water supply , be sure to use • brand new water inlet hose and appropriate sealing gaskets (attached). Do not locate the machine in a room with temperature below 0°C. Parts of the • machine may be damaged if frozen. Instal
ページ5に含まれる内容の要旨
Before connecting the appliance read these instructions carefully. Repairing the failure arising from inappropriate connections or use of the appliance is not covered by the guarantee. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help
ページ6に含まれる内容の要旨
187352 Installation and connection In removing the wrapping be careful not to Package removal damage the appliance with a sharp object. Before connecting the appliance, let it warm up to room temperature (wait for two hours). Our appliances are packed in environmentally • friendly materials which may be recycled, deposited or decomposed without any threat to the environment. T o this end all wrappings are marked accordingly . • Removal of transport Move the pipes
ページ7に含まれる内容の要旨
Leveling the appliance Put the appliance in horizontal position by turning • the adjustable legs. The legs are adjustable up to +/- 1 cm. After the adjustment tighten the nuts firmly (A) - towards the bottom of the machine! Vibrations, moving of the appliance and loud operation due to incorrect setting of the adjustable feet shall not be covered by this warranty. The appliance should be placed on a surface with concrete base; the surface should be dry and clean in order to prev
ページ8に含まれる内容の要旨
187352 Water outlet connection Fix the outlet hose to run into the sink or the • bathtub, or connect it directly to the wall drain outlet (diameter min. cm). W all drain must be installed properly and must • enable occasional cleaning. Fasten the outlet hose support with a piece of • rope led through the hose elbow, to prevent the hose from slipping to the floor . The end of outlet hose should be placed between minimum 60 cm and maximum 100 cm above the floor level. Connect the a
ページ9に含まれる内容の要旨
9 187352
ページ10に含まれる内容の要旨
187352 Operation A - program selector Signal LED’s: - ON/OFF (orange) B - Rinse hold button - pump stop/failure C - START/PAUSE button (green) Washing procedure Open the door of the machine • Load the laundry into the drum • Close the door • Open the water inlet faucet • Select the program • Add washing and treatment agents (detergent and • softener) S t a r t t h e o p e r a t i o n b y p u s h i n g t h e S T A R T / P A U S E • button (C) - Open the do
ページ11に含まれる内容の要旨
Pay attention to the labels on the clothes, indicating the recommending washing mode (see table of textile treatment symbols on the last page of these instructions). W Washing machine ashing machine Program is selected by turning the program selector operation operation (A) from the “0” position to the desired washing program. The ON/OFF signal LED starts flashing. The program selector (A) may be turned in both directions, and the appropriate program selected according to the type of l
ページ12に含まれる内容の要旨
187352 skirts, blouses) and curtains. Wool Especially gentle program for washing wool and garments made from mixture of other fabrics with wool, appropriately marked for machine washing. - Selection of additional function Rinse hold This function is switched on after the selection of • a basic program by pressing the button (B). It may also be switched on during the operation, prior last rinse. Indicator LED above the button is on. The function is switched of f by pressing the same •
ページ13に含まれる内容の要旨
Rinse Independent program for rinsing delicate laundry , without intermediate spinning and with short final spin. Y ou may use it for rinsing manually washed delicate laundry or for extra rinsing for people with skin sensitive to detergents. Softener This program is intended for softening, bleaching or impregnating of washed laundry . It is completed with spinning at max. 1000 RPM. Rinse hold Use it when the washing program was interrupted or if drain function was engaged, and you only w
ページ14に含まれる内容の要旨
187352 Start the operation Start the operation Push the ST AR T/P AUSE button (C). The ON/OFF • LED stops flashing, the machine starts operating after a few seconds. If the door is not properly closed after starting the operation, the ON/OFF LED starts flashing again after a few seconds. When you close the door , the machine initiates the selected program. In case you would like to alter the washing • program after the initiated washing operation, turn the program selector for one s
ページ15に含まれる内容の要旨
s p i n ) t o e m p t y t h e w a t e r a n d t e r m i n a t e t h e p r o g r a m . Pause button B y p r e s s i n g t h e S T A R T / P A U S E button (C) program m a y b e s u s p e n d e d a t a n y t i m e . A f t e r c e r t a i n t i m e y o u m a y o p e n t h e d o o r i f t h e r e i s n o w a t e r i n t h e d r u m , otherwise this is not possible. Program is continued b y p r e s s i n g t h e S T A R T / P A U
ページ16に含まれる内容の要旨
187352 Tips for washing and energy saving Before washing sort out the laundry according to • the type, degree of dirtiness and color fastness. Prior selecting the washing program consult the • sewn tab with information on a particular piece of laundry (see Maintenance chart on the last page). W ash separately the new colored textile products • for the first time. W ash heavily soiled laundry in small quantities or • add more detergent. Treat stubborn stains with special stain remov
ページ17に含まれる内容の要旨
Hardness Degree of hardness scale °dH(°N) m mol/l °fH(°F) p.p.m. 1 - Soft 0-7 0-1,3 0-12 0-120 2 - Medium 7-14 1,3-2,5 12-25 120-250 3 - Hard 14-21 2,5-3,8 25-37 250-370 4 - Extra hard >21 >3,8 >37 >370 In case of hard water add detergent according to the Chart for degree 1 and add appropriate quantity of water softener (see manufacturer ’ s instructions). If you do not apply the program which includes • the pre-wash feature, you may add washing detergent directly into the drum. If you us
ページ18に含まれる内容の要旨
187352 Cleaning and maintenance Disconnect the washing machine from the mains before cleaning! The casing should be cleaned with soft cloth and • mild detergent. The interior of the drum and the door gasket is • cleaned by washing at 60°C without laundry and adding half quantity of detergent. If necessary , clean the detergent dispenser . Pull it • out from its casing completely by pressing the flap (see Fig.). If necessary , clean the cover of the bung under • the running water
ページ19に含まれる内容の要旨
Wash it under running water using a brush, and • dry it. Remove any leftover dried detergent from the bottom of the casing. Clean the entire rinsing area of the washing • machine with a brush, especially the nozzles on the upper side of the rinsing chamber . Clean frequently the water inlet hose screen • under running water. After each wash wipe the door rubber gasket. This • will prolong its useful life. Open the filter lid using flat screwdriver or similar • tool.
ページ20に含まれる内容の要旨
187352 T urn it anti-clockwise, pull it out and clean under • running water. Insert the filter back as shown on the picture • (arrow and pointer), and tighten by turning it in clockwise direction. To ensure good sealing the gasket surface (A) must be dirt free. 20
