ページ1に含まれる内容の要旨
OWNER'S
MANUAL
MODEL NO.
580.751330
®
11O0 PSi AT 1.6 GPM
ELECTRnC HnGH PRESSURE WASHER
DOUBLE nNSULATED
HOURS:
o Assembly
Mon.- FrL 8 a.m. to 5 p.m
° Operation
(CST)
o Customer Responsibilities
CAUTION:
Read and Follow
, Service and Adjustment
all Safety Rules
. Repair Parts
and Instructions
Before Operating
This Equipment
SEARS, ROEBUCK and CO., Hoffman Estates, IL 60179 U.S.A.
Part No 97068 Revision 1 (12/15!95)
ページ2に含まれる内容の要旨
iMPORTANT SAFETY INSTRUCT ONS Save these instructions _ WARNING e Highpressurespraycan cause paintchipsor otherparticlesto become airborne and fly at high speeds RISK OF ELECTROCUTION e Always wear eye protection when you use this equipment or • inspect cord before every use Do not use if cord is damaged when you are in vicinity where the equipment is in use e Keep all connections dry and off the ground e Operate the pressure at no more than the PSI fluid pressure e Do not touch plug with wet ha
ページ3に含まれる内容の要旨
OUTLET PRESSURE 1100 psi CONGRATULATIONS on your purchase of a Sears Crafts- man high pressure washer. It has been designed, engi- FLOW RATE t .6 gpm neered and manufactured to give you the best possible dependability and performance. DETERGENT MIX Use undiluted detergent Should you experience any problem you cannot easily DETERGENT RATIO 17.1 remedy, please contact your nearest Sears Service Cen- WATER SUPPLY ter/Department or call the 1-800 number listed on the front TEMPERATURE Not to exceed
ページ4に含まれる内容の要旨
TABLE OF CONTENTS CUSTOMER RESPONSIBILITIES ....................................10 SAFETY RULES .............................................................. 2 STORAGE ..................................................................... 11 PRODUCT SPECIFICATIONS ............................................. 3 TROUBLESHOOTING .................................................. 12 CONTENTS OF HARDWARE PACK .............................. 5 ACCESSORIES AND ATTACHEMENTS ......................... 5 R
ページ5に含まれる内容の要旨
CONTENTS OF HARDWARE PACK Parts packed separately In carton Spray Gun Owner's Manual Utility Bn_sh and Adaptor High Pressure Hose Cleaning Kit Quick-Connect ACCESSORIES AND ATTACHMENTS These accessories and attachments were available when the high pressure washer was purchased_ They are also available at most Sears retail outlets and service centers, Most Sears stores can order these items for you when you provide the model number of your high pressure washer_ Some of these accessories may not a
ページ6に含まれる内容の要旨
ASSEMBLY Read these instructions and Operator's Manual in its en- tirety before you attempt to assemble or operate your new high pressure washer. Your high pressure washer has, for the most part, been assembled at the factory, except those parts left unassembled_ Before you can operate your new high pressure washer', you must properly connect the high pressure hose. IF YOU HAVE ANY PROBLEMS WITH THE ASSEMBLY OF YOUR PRESSURE WASHER, PLEASE CALL THE PRESSURE WASHER HELPLINE AT 1-800-222-3136. TO
ページ7に含まれる内容の要旨
OPERATION KNOW YOUR HIGH PRESSURE WASHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR HIGH PRESSURE WASHER. Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and adjustments, Save this manual for future reference. DETERGENT PICKUP TUBE AND FILTER INTAKE SUPPLY OPENING • MALE CONNECTOR RLTER INLET SCREEN "A" QUICK-CONNECT ESSURE OUTLET WAND (male connector, see also Fig "A") GUN TURBO NOZZLE PRESSURE HOSE FIG
ページ8に含まれる内容の要旨
OPEBATBON HOW TO USE YOUR WASHER ADJUSTABLE IF YOU HAVE ANY PROBLEMS OPERATING YOUR NOZZLE PRESSURE WASHER, PLEASE CALL THE PRESSURE UTILITY WASHER HELPLINE AT 1-800-222-3136. STOPPING YOUR PRESSURE WASHER ,,F ADAPTOR FIG. 7 FIG. 8 HOW TO USE ADJUSTABLE NOZZLE FIG. 6 A WARNING: NEVER ADJUST SPRAY PATTERN WHEN SPRAYING. NEVER PUT HANDS IN FRONT o If the pressure washer is running, press the ON/OFF OF SPRAY NOZZLE TO ADJUST SPRAY PAT- switch (Fig 6) TERN. o Simply shutting OFF washer will not rele
ページ9に含まれる内容の要旨
OPERATaON APPLYING DETERGENT WITH ADJUSTABLE PRESSURE WASHING/RINSING NOZZLE WARNING: BE EXTREMELY CAREFUL IF YOU A IMPORTANT: USE SOAPS DESIGNED SPECIFICALLY MUST USE PRESSURE WASHER FROM LADDER SCAFFOLD NG OR ANY OTHER RELATIVELY UN- FOR PRESSURE WASHERS. HOUSEHOLD DETER- STABLE LOCATION. PRESSURE IN A RUNNING GENTS ARE NOT RECOMMENDED. WASHER BUILDS IN THE WAND AS YOU CLIMB. IMPORTANT: YOU MUST ATTACH ALL HOSES BE- WHEN YOU PRESS THE TRIGGER, THE RECOIL FORE YOU STARTTHE PRESSURE WASHER. STAR
ページ10に含まれる内容の要旨
OPERATUON IMPORTANT: DO NOT RUN PUMP WITHOUT THE TO TURN ON WASHER WATER SUPPLY CONNECTED AND TURNED ON OR WARNING: NEVER ADJUST SPRAY PATTERN THE PUMP WILL BE DAMAGED° WHEN WATER IS SPRAYING. NEVER PUT HANDS IN FRONT OF SPRAY NOZZLE TO ADJUST SPRAY SIPHONING PATTERN. ALWAYS KEEP HANDS IN THE POSI- We do not recommend that you siphon your water supply TION SHOWN IN FIG. 9 from sources other than from connecting to household water supply. CAUTION: Gun Idcks back. Use both hands. TiPS WARNING: Ris
ページ11に含まれる内容の要旨
STORAGE PRESSURE WASHER PUMP Test the pressure washer by operating in the high and low Water should not remain in the unit for long periods of time. position. Sediments of minerals can deposit on pump parts and "freeze" pump action_ After each time you are finished using your pressure washer, follow this procedure: o Flush detergent hose by placing the injector filter into a pail of clear water while running Pressure Washer with nozzle in low pressure mode Flush until you can see clear water flo
ページ12に含まれる内容の要旨
TF OUBLESHOOTnNG WARNING: MANY OF THE ACTIONS YOU ARE ASKED TO CORRECT ARE PROBLEMS THAT INVOLVE CLEANING A COMPONENT OF THE PRESSURE WASHER. WHEN CLEANING ANY PART OF THIS UNIT, TURN OFF THE UNIT AND COMPLETELY DISCONNECT THE POWER SUPPLY. PROBLEM CAUSE CORRECTION 1. Check cable, plug, power socket Pressure Washer will not start 1 No electrical power is available. and fuse. 2 Motor overheats. 2 Press trigger of wand to relieve pressure on the uni[ Allow unit to cool for about 2 min. It should r
ページ13に含まれる内容の要旨
CRAFSTIVlAN ELECTRIC HIGH PRESSURE WASHER 580.751330 REPAIR PARTS 15 13 9 DESCRIPTION ITEM PART NO. DESCRIPTION ITEM PART NO. MOTOR HOUSING (1 REQ) 2 96154 SCREW (4 REQ,) 11 96156 CABLE (2 REQ) 3 96155 MOTOR HOUSING (1 REQ+) 12 94307 SEAL (1 REQ ) 4 94313 GEAR WHEEL (1 REQ,) 13 94308 CELLULAR RUBBER CORD (1 REQ+) 5 94314 GASKET (1 REQ,) _4 94369 HOUSING COVER (1 REQ+) 6 94315 O-RING (1 REQ) 15 96159 _NSULATING MAT (1 REQ) 7 96156 ROTARY SHAFT SEAL (1 REQ,) 16 94310 MOTOR (1 REQ,) 8 94316 BEARING
ページ14に含まれる内容の要旨
CRAFSTMAN ELECTRIC HiGH PRESSURE WASHER 580.75"1330 REPAIR PARTS 14
ページ15に含まれる内容の要旨
CRAFSTMAN ELECTRIC HIGH PRESSURE WASHER 580.751330 REPAIR PARTS DESCRIPTION PART NO. ITEM HOUSING (1 REQ,) 96160 1 SPILL VALVE 1(REQ,) 2 SLEEVE (1 REQ,) 3 SELF-TAPPING SCREW (2 REQ.) 96161 4 SPARE PARTS KIT (1 REQ,) 96162 5 PUMP COVER (1 REQ.) 96163 6 19,3 x 2Atom O-RING (1 REQ_) 7 NOZZLE INSERT (1 REQ,) 94304 6 OVAL HEAD SCREW (4 REQ) 96164 9 10 x 2,5ram O-RING (3 REQ) 94302 10 VALVE (3 REQ) 11 76 x 2ram O-RING (1 REQ) 12 CYLINDER HEAD (1 REQ) 96165 13 PISTON (3 REQ,) 94303 14 HELICAL SPRING (3
ページ16に含まれる内容の要旨
CRAFSTIVIAN ELECTRIC HIGH PRESSURE WASHER 580.751330 REPAIR PARTS 4 21 5 18-- _Z_,_ I 1 17 14 16 16
ページ17に含まれる内容の要旨
CRAFSTMAN ELECTRIC HIGH PRESSURE WASHER 580.751330 REPAIR PARTS DESCRIPTION ITEM PART NO. 1 94293 COVER (1 REQ.) 2 94294 FILTER (1 REQ) 3 94295 HOSE (1 REQ) 4 96150 SCREW (7 REQ) ELECTRIC CORD (1 REQ) 5 94296 CORD BUSHING (1 REQ,) 6 94297 SWITCH (1 REQ) 7 94298 BRACKET (1 REQ ) 8 96151 PROTECTING CAP (1 REQ,) 9 94299 SWITCH FRAME(1 REQ) 10 96152 11 96153 RUBBER BUFFER(4 REQ) QUICK DISCONNECT ADAPTOR (1 REQ) 12 96016 WATER INLET FILTER (1 REQ.) 13 94306 WAND EXTENSION (1 REQ) 14 95602 15 95563 SP
ページ18に含まれる内容の要旨
® 1100 PSi AT 1.6 GPM OWNER'S ELECTRIC HiGH PRESSURE WASHER MANUAL DOUBLE iNSULATED [-_1 Each High Pressure Washer' has its own model number. MODEL NO. The model number for your pressure washer' will be found on a decal attached to the unit. 580.751330 All parts listed herein may be ordered through Sears, Roebuck and Co Service Centers and most Retail Stores. IF YOU NEED WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOL- LOWING INFORMATION: REPAIR SERVICE e PRODUCT--HIGH PRESSURE WASHER OR PARTS e
