ページ1に含まれる内容の要旨
Owner’s Instructions
SW52ASP/SW62ASP
Please read this manual before using and note how to use in the proper manner.
Please be careful of keeping the manual.
Otherwise, it should be bought separately.
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
DESCRIPTION OF PARTS . . . . . . . . . . . . . . . . . . . . .
ページ2に含まれる内容の要旨
FEATURES MAGIC FILTER ECONO WASH COURSE 4 1 T his unique magic Filter ensures that Designed to address concerns on water all the lint inside the tub is captured for consumption. Less water is used per top quality filtering results to deliver wash, while continuing to deliver a clean consistently effective cleaning results. and effective washing performance. It has been certified from WELS(Water Efficiency Labelling and Standards) of Australia. SOFTENER DISPENSER 2 The Softener Dispense
ページ3に含まれる内容の要旨
DESCRIPTION OF PARTS WATER SUPPLY HOSE(HOT) FILTER LID Be sure to keep the lid WATER SUPPLY HOSE (COLD) closed during washing and spinning. DRAIN-HOSE (PUMP) Lint will be collected in the filter during washing. FABRIC SOFTENER DETERGENT BOX DISPENSER BLEACH INLET POWER CORD WATERFALL FLOW SPIN BASKET PULSATOR GROUND LEAD When the water pipe is FRONT CONTROL metal, make sure to cover PANEL the end of the ground wire. ADJUSTABLE LEGS Adjust the length of the legs when installing the wa
ページ4に含まれる内容の要旨
SAFETY INSTRUCTIONS Please note that the following precautions for safety intend to prevent unpredictable danger and damage by helping the proper use in safety. When using hot water in washing, please make sure that the water should not exceed 50˚C. • Plastic parts may be deformed or damaged, and an electric shock or a fire may take place. WARNING CAUTIONS There might be serious injury or fatal accident when There might be a slight injury or damage when you you violate this instruction. violate t
ページ5に含まれる内容の要旨
INSTALLATION & MAINTENANCE ENVIRONMENT IN CASE OF PUMP-DRAINED WASHER T ake out the Be sure to join tightly Install the drain Leave some space. cap-hose and the drain hose into the hose in the position Maintain at least 10cm between the washer and the wall. connect the drain-outlet on the left of about 70~80cm Place the washer on a sturdy flat surface. outlet-hose side of the machine. above the ground. If the washer is placed on an uneven or weak surface, noise or vibration occurs.
ページ6に含まれる内容の要旨
CLEANING THE FILTER NET 1. Push the upper part of 2. Open the cover as 3. Clean the filter. 4. Close the cover and insert the lower the filter and pull in. shown in the figure. part of the filter in the basket first and then push the filter with "click" sound . HOW TO ADD THE FABRIC SOFTENER When a proper amount (one time does) of Do not open the lid during the Spin Dry cycle. fabric softener is stored in the softener inlet,it is If added too early, its effectiveness will decrease. autom
ページ7に含まれる内容の要旨
PRECAUTIONS WARNING! NOTE THE FOLLOWING PRECAUTIONS TO PREVENT ELECTRICITY LEAKAGE AND THE POSSIBILITY OF ELECTRIC SHOCK. Earthing is necessary to prevent leakage or electric shocks caused by the electric currents leaked from the machine. How to earth an outlet with earthing terminals when an earthed power load is not fitted. Outlet with earthing terminals: Even when the internal wires of the earthing terminals are joined, connect the earthing conductor (green) of the machine to the t
ページ8に含まれる内容の要旨
WASHING INSTRUCTION PROCEDURE 1. Sort the laundry into separate wash loads. Each load of washing should contain clothing which needs the same washing conditions. For example, you should not wash delicate clothes with very dirty work clothes. 2. Load the laundry into washing. Before load, check all pockets, and close zippers, hooks and eyes. 3. Add the detergent. (See Page 5) 4. Add the fabric softener. (See Page 5) 5. Close the lid. 6. Press power button. 7. Choose the wash program & opti
ページ9に含まれる内容の要旨
WASHING PROGRAM SENSOR Program CLEANING THE TUB The best washing program is chosen automatically Press the POWER button. Load size and water level is determined automatically Press the PROGRAM button to select the HEAVY DUTY course. Unplug the power cord after washing. Press the CYCLE button to select SOAK. - You can select the water supply or temperature (hot/cold). Press the WATER LEVEL button to select HIGH. Press the START/HOLD button. HEAVY DUTY Program Add a dedicated
ページ10に含まれる内容の要旨
OPTIONAL CYCLE WASH ONLY RINSE ONLY When you choose this cycle, wash cycle is operated. When you choose this function, only rinse cycle is operated. Pressing optional cycle key during washing changes the wash Pressing function key during rinsing changes the number of time in two minute intervals. rinses. Up to 5 rinses can be optionally selected. The wash time can be changed to between 3 and 25 minutes. Unplug the power cord after washing. Load size and water level is determin
ページ11に含まれる内容の要旨
TROUBLESHOOTING Washing machine won’t work Spinning does not work Is the water tap opened? Is the laundry spread out evenly Is the washer plugged in? in the washer? Is the power cut off? Is the washer set on a sturdy Is the fuse all right? flat surface? Is there enough water? Is the lid closed? Water does not drain Water is not supplied Is the drain hose down? (No pump) Is the water tap opened? Is the drain hose frozen? Is the water cut off? Is the drain hose clogged? Is the water supply hose or
ページ12に含まれる内容の要旨
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Samsung Electronics Australia 7 Parkview Drive, Homebush Bay NSW 2127 1300 362 603 www.samsung.com/au SW62ASP-01488K_EN.indd 11 2006-06-05 ｿﾀﾀ・9:15:13
