ページ1に含まれる内容の要旨
OWNER’S MANUAL
WASHING MACHINE
Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the washer is installed
correctly and safely. Leave these instructions near the washer
after installation for future reference.
F1480RD(1~9)
P/No. : MFL62644924 www.lg.com
ページ2に含まれる内容の要旨
Contents Contents....................................2 Thank you for buying a LG Fully Product Features......................3 Automatic Washing Machine. Important safety instructions Please read your owner’s manual Important safety instructions .................4 Basic safety precautions .......................5 carefully, it provides instruction on safe Save these instructions.........................6 installation, use and maintenance. Safety instructions for use.....................7 Retain
ページ3に含まれる内容の要旨
Product Features Inverter Direct Drive system The advanced Brushless DC motor directly drives the drum without belt and pulley. 6 Motion Washer is able to perform various drum actions or a combination of different actions depending on the wash program selected. Combined with a controlled spin speed and the ability of the drum to rotate both left and right, the wash performance of the machine is greatly improved, giving you perfect results every time. Protection against creases With the alterna
ページ4に含まれる内容の要旨
Important safety instructions READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE. WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. Your Safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This
ページ5に含まれる内容の要旨
Important safety instructions Basic safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following: • Before installation, check exterior • Do not wash or dry articles that have damages. If it has, do not install. been cleaned in, washed in, soaked in, or spotted with combustible or • Do not install or store the washer explosive substances (such as wax, where it will be exposed to the oil, pai
ページ6に含まれる内容の要旨
Important safety instructions Basic safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following: • Before discarding an old machine • To reduce the risk of personal injury, unplug it. Render the plug useless. adhere to all industry recommended Cut off the cable directly behind the safety procedures including the use appliance to prevent misuse. of long sleeved gloves and safety glasses. Fai
ページ7に含まれる内容の要旨
Important safety instructions Safety instructions for use To minimize the risk of fire within the inner bowl, the following should be observed: • Items that have been spotted or • Items containing foam rubber (also soaked with vegetable or cooking oil known as latex foam) or similarly constitute a fire hazard and should textured rubber like materials should not be placed in a tumble dryer. not be dried in a tumble dryer on a Oil-affected items can ignite spontaneously, heat setting. Foam rubbe
ページ8に含まれる内容の要旨
Specifications Transit bolts Power plug • If the supply cord is damaged, it must be replaced by the Drawer manufacturer or its service agents (For detergent and or a similarly qualified person in fabric softener) order to avoid a hazard. Control panel Drain hose Drum Drain pump filter Door Drain plug Adjustable feet Lower cover cap Name : Front loading washing machine Power supply : 220 - 240 V~, 50 Hz Size : 600 mm(W) ✕ 640 mm(D) ✕ 850 mm(H) Weight : 72 kg Max.Watt : 2100 W (Wash) /
ページ9に含まれる内容の要旨
Installation Removing packing 1. Remove the cardboard box and styrofoam packing. 2. Lift the washing machine and remove Washer the base packing. 3. Remove the tape securing the power supply cord and drain hose. Base Packing 4. Remove the inlet hose from the drum. NOTE • Keep the spanner provided for future use. Spanner WARNING • Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation ! Keep all packaging well away from children. Removing trans
ページ10に含まれる内容の要旨
Installation Installation place requirements ❿ Location • Level floor : Washer Allowable slope under entire washer is 1˚ • Power outlet : Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance. approx. • Additional Clearance : 2cm For Wall, 10cm:rear / 2cm : right & left side Do not place or store laundry products on top of washer at any times. They can damage the finish or controls. ❿Positioning • Install the washer on a flat
ページ11に含まれる内容の要旨
Installation ❿Electrical connection • Do not use an extension cord or double adapter. • If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard. • Always unplug the machine and turn off the water supply after use. • Connect the machine to an earthed socket in accordance with current wiring regulations. • The appliance must be positioned so that the plug is easily accessible. • Repairs to the washing ma
ページ12に含まれる内容の要旨
Installation Connecting water supply hose 2 • Water supply pressure must be between 100 kPa and 1000 kPa (1.0 - 10.0 kgf / cm ). • Do not strip or crossthread when connecting inlet hose to the valve. • If the water supply pressure is more than 1000 kPa, a decompression device should be installed. • Periodically check the condition of the hose and replace the hose if necessary. ❿Step1 : Check rubber seal inlet hose • Two rubber seals are supplied with the water inlet hoses. They are used for
ページ13に含まれる内容の要旨
Installation ❿Step3: Connect hose to washer • Make sure that there are no kinks in the hose and that they are not crushed. ❿When your washer has two valves. • The Inlet hose which has red connector is for the hot water tap. • If the washer has two valves, the energy is saved by using hot valve. NOTE • After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the s
ページ14に含まれる内容の要旨
Installation Installation of drain hose • The drain hose should not be placed higher than 100 cm above the floor. Water in the washer does not drain or about 100 cm drains slowly. • Securing the drain hose correctly will about 145 cm protect the floor from damage due to water leakage. • If the drain hose is too long, do not force back into the washer. This will cause abnormal noise. about 105 cm • When installing the drain hose to a sink, secure it tightly with string. • Securing the drain ho
ページ15に含まれる内容の要旨
Installation Leveling 1. Leveling the washing machine properly prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room. NOTE • Timber or suspended type flooring may contribute to excessive vibration and unbalance. 2. If the floor is uneven, turn the adjustable feet as required. (do not insert pieces of wood etc. under the feet) Make sure that all four feet are stable and resting on the floor and then check that the ap
ページ16に含まれる内容の要旨
Installation ❿Concrete floors • The installation surface must be clean, dry and level. • Install washer on a flat hard floor. ❿Tile floors (Slippery floors) • Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into 70x70 mm sections and stick the pieces on to the dry tile where machine is to be placed.) • Tread Mate is a self adhesive material used on ladders & steps that prevents slipping. ❿Wooden floors (Suspended floors) • Wooden floors are particularly sus
ページ17に含まれる内容の要旨
How to use washer Operating washing machine 1. Sort Laundry. (Refer to 18 page) 2. Open the door and load laundry. 3. Press the Power button. 4. Select a Program. (Refer to 19~21 page) Select options at this time (Refer to 23~28 page) Additional Program Temperature Spin Speed Other functions 5. Add detergent. (Refer to 29~30 page) 6. Press the Start/Pause button. 17
ページ18に含まれる内容の要旨
How to use washer Care before washing 1. Care Labels Wash temperature Look for a care label on your clothes. Normal machine wash This will tell you about the fabric content of your garment and how it should be washed. Permanent press Delicate Hand wash Do not wash 2. Sorting To get the best results, sort clothes into loads that can be Sort laundry by... washed with the same wash cycle. Water temperature and spin speed and different fabrics need to Wash Soiling temperature be washed in differ
ページ19に含まれる内容の要旨
How to use washer Washing program table • Recommended courses according to the laundry type. Proper Maximum Description Program Fabric type Temp. Load Provides better performance by 40°C Cotton combining various drum motions. Color fast garments (shirts, (Cold to 95°C) nightdresses, pajamas, etc) Rating Provides optimized washing and normally soiled cotton Cotton 60°C performance with less energy load (underwear). Eco (Cold to 60°C) consumption. Easy This cycle is suitable for casual shirts 40
ページ20に含まれる内容の要旨
How to use washer Drying Program Table Program Fabric type Maximum Load Eco Dry 4.5 kg Cotton or Linen Fabrics such as cotton towel, t-shirts, linen laundries. Cupboard Dry 6.0 kg Iron Dry Cotton or Linen Fabrics for ready to ironing. 6.0 kg Easy Care Textiles, Synthetic Fabrics Low Temp. 4.0 kg Suitable for Easy care, Mix programm washable clothes 30 min. – 0.5 kg 60 min. – 1.5 kg 120 min. – 3.0 kg • Water Temperature: Select water temperature to suit wash cycles. Always follow g
