ページ1に含まれる内容の要旨
Instructions for use
WASHING MACHINE
Contents
GB
Installation, 2-3-4-5
Unpacking and levelling
GB
Connecting the electricity and water supplies
The first wash cycle
English,1
Technical data
Care and maintenance, 6
Cutting off the water or electricity supply
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Precautions and tips, 7
General safety
Disposal
Description of the washing mac
ページ2に含まれる内容の要旨
Installation ! Keep this instruction manual in a safe place for Levelling your appliance correctly will provide it GB future reference. Should the appliance be sold, tran- with stability and avoid any vibrations, noise and sferred or moved, make sure the instruction manual shifting during operation. If it is placed on a fitted accompanies the washing machine to inform the or loose carpet, adjust the feet in such a way as new owner as to its operation and features. to allow enough room for ve
ページ3に含まれる内容の要旨
65 - 100 cm Connecting the drain hose • the supply voltage is included within the values GB indicated on the Technical Data Plate fixed on Connect the drain the machine. hose, without bending it, to a draining duct or • the socket is compatible with the washing a wall drain situated machine’s plug. If this is not the case, replace between 65 and 100 the socket or the plug. cm from the floor; Your appliance is now supplied with a 13 amp fu- sed plug it can be plugged into a 13 amp socket
ページ4に含まれる内容の要旨
As the colours of the wires in the lead may not ! The power supply cable must only be repla- GB correspond with the coloured markings iden- ced by an authorised serviceman. tifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green & Yellow wire to terminal when these norms are not respected. marked E or or coloured Green or Green & Yellow. The first wash cycle Connect Brown wire to terminal marked L or Once the appliance has been
ページ5に含まれる内容の要旨
GB Technical data Model IWC 71451 width 59.5 cm Dimensions height 85 cm depth 53,5 cm Capacity from 1 to 7 kg Electrical please refer to the technical data plate fixed to the machine connections maximum pressure 1 MPa (10 bar) Water minimum pressure connection 0.05 MPa (0.5 bar) drum capacity 52 litres up to 1400 rotations per Spin speed minute Test wash Programme 2: cycles in Cotton Standard 60°. accordance with directives Programme 3: 1061/2010 and Cotton Standard 40°. 1015/2010.
ページ6に含まれる内容の要旨
Care and maintenance 2. unscrew the lid Cutting off the water and electri- GB by rotating it anti- city supplies clockwise (see figu- • Turn off the water tap after every wash cycle. re): a little water may This will limit wear on the hydraulic system trickle out. This is inside the washing machine and help to pre- perfectly normal; vent leaks. • Unplug the washing machine when cleaning it and during all maintenance work. Cleaning the washing machine The outer parts and rubber components
ページ7に含まれる内容の要旨
Precautions and tips product reminds you of your obligation, that when you ! This washing machine was designed and constructed in GB dispose of the appliance it must be separately collected. accordance with international safety regulations. The fol- Consumers should contact their local authority or retailer lowing information is provided for safety reasons and must for information concerning the correct disposal of their therefore be read carefully. old appliance. General safety • This ap
ページ8に含まれる内容の要旨
Description of the washing machine and starting a wash cycle Control panel GB WASH CYCLE PROGRESS/ DELAY TIMER indicator lights FUNCTION START/PAUSE ON/OFF button buttons with button with indicator lights indicator light TEMPERATURE DOOR LOCKED knob indicator light Detergent dispenser drawer WASH CYCLE SPIN SPEED knob knob Detergent dispenser drawer: used to dispense DOOR LOCKED indicator light: indicates whether the detergents and washing additives (see “Detergents and door may be ope
ページ9に含まれる内容の要旨
Wash cycle phase indicator lights Indicator lights GB Once the desired wash cycle has been selected and has be- gun, the indicator lights switch on one by one to indicate which The indicator lights provide important information. phase of the cycle is currently in progress. This is what they can tell you: Wash Delayed start If the DELAY TIMER function has been activated (see “Per- Rinse sonalisation”), after the wash cycle has been started the indicator light corresponding to the selected delay
ページ10に含まれる内容の要旨
Wash cycles Table of wash cycles GB Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) Fabric Wash softener Daily 1 White Cotton: extremely soiled whites. 90° 1400 7 53 2.16 72 160’ 2 Cotton Standard (1): heavily soiled whites and resistant colours. 60° 1400 7 53 1.13 52.5 180’ 3 Cotton Standard (2): lightly soiled whites and delicate colours. 40° 1400 7 53 1.00 75 170’ 4 Synthetics: heavily soiled resistant colours. 50° 800 3.5 - - - 110’ 4 Syntheti
ページ11に含まれる内容の要旨
Personalisation Setting the temperature GB Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash . The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. Setting the spin speed Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle. The maximum spin speeds available for each wash cycle are as follows:
ページ12に含まれる内容の要旨
Detergents and laundry necessary; do not use softeners or detergents containing Detergent dispenser drawer GB softeners. Stuffed duvets cannot be washed with this pro- Good washing results also depend on the correct dose of gramme. detergent: adding too much detergent will not necessa- Wool: all wool garments can be washed using programme rily result in a more efficient wash, and may in fact cause 10, even those carrying the “hand-wash only” label. build up on the inside of your appliance
ページ13に含まれる内容の要旨
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure GB that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. • There is no power to the socket, or the fuse has blown in the mains plug. The wash cycle does not start. • The door is not closed prop
ページ14に含まれる内容の要旨
The machine is noisy. • There will always be some motor, pump and drum noise during spin. GB The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly. This is a safety feature to prevent damage. Out of Balance can be caused by washing a single heavy it
ページ15に含まれる内容の要旨
Assistance 12 Months Parts and Labour Guarantee GB Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you. This guarantee is subject to the following conditions:
ページ16に含まれる内容の要旨
195113487.00 03/2013 - Xerox Fabriano After Sales Service GB No one is better placed to care for your Indesit appliance during the course of its working life than us - the manufacturer. Essential Contact Information Indesit Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1100 fully qualified engineers on call to ensure you receive fast, reliable, local service. UK: 08448 224 224 Republic of Ireland: 0818 313 413 www.indesitservice.
