ページ1に含まれる内容の要旨
AUTOMATIC FRONT LOADING WASHING MACHINE
HWM70-1203D
USER MANUAL
HWM80-1403D
S
C RPM
90 1200 HWM70-1203D
Mixed 7kg
1000
800
Spin/Drain 400
Wash Temp.Spin Speed Intense Extra Rinse Start/Pause HIGH SPEED
1200rpm
Arial Regular18pt ,100%black colour
ページ2に含まれる内容の要旨
03 - 09 10 - 15 16- 20 A t bLe oF contents beFore use using the AL pp A i nce MAINTENANCE >componenTs ................................03 >program selecTion ......................10 >Display coDes ...............................1 8 >prepara Tion................................0 4 >TroubleshooTing........................1 9 >consumpTion anD Technical Da Ta..... 11 >safeTy insTrucTions ....................05 >Washing meThoDs .......................12 >impor Tan T s afe Ty informa Tion.. .....20 >i
ページ3に含まれる内容の要旨
03 Before use components ThANkS fOR PURChASINg A hAIER PRODUCT please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance. Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance. if you sell the appliance, give it away, or leave it behind when you move house, make s
ページ4に含まれる内容の要旨
04 BEFORE USE PREPARATION PREPARING THE MACHINE Remove all the packing materials prior to use, including the polystyrene base. Upon opening the package, water drops may be seen on the plastic bag and the porthole. This is normal phenomenon resulting from water tests in the factory. DESCRIPTION This diagram may differ slightly from the layout of the washing machine you have just purchased due to technical improvements. S C RPM 90 1200 HWM70-1203D Mixed 7kg 1000 800 Spin/Drain 400 HIGH SPEED
ページ5に含まれる内容の要旨
05 Before use sAFety instructions BEfORE SwITChINg ThE APPLIANCE ON fOR ThE fIRST TIME Do ... Do noT ... ... make sure that the transport bolts are removed. ... Touch or use the appliance when barefoot or with wet ... use a separate earthed socket for the power supply. or damp hands or feet. ... make sure that the plug is accessible. ... use flammable detergent or dry cleaning agent. ... hold the plug and not the electric cable when ... use any flammable sprays in close vicinity to the
ページ6に含まれる内容の要旨
06 Before use nsti ALLAtion REMOVINg ThE TRANSPORTATION BOLTS The transportation bolts are designed for clamping anti-vibration components inside of the washing machine during the transportation process. 1. remove the back cover. 2. remove the four bolts on the rear side and take out the synthetic stabilisers from within the machine. 1 . 2 . 3. replace the back cover. 4. fill the holes left by the bolts with blanking plugs. Note: 1.when replacing the back cover, ensure convex surface is fac
ページ7に含まれる内容の要旨
07 Before use INLET hOSE 1. connect the nut on the inlet hose to the connector on the water valve. 2. connect inlet hose to a water tap with cold, fresh water. Note: Use the hose-set supplied with the appliance. Old 1. 2. hose-sets should not be reused. DRAIN hOSE 1. use the drain hose bracket to keep the end of the drain hose retained and prevent the outflow of water. Don't extend the length of the drain hose; if an extended hose is required, please consult a service agent. 1. 2. The height
ページ8に含まれる内容の要旨
2 3 1 2 1 08 BEFORE USE CONTROL PANEL I J K S C RPM HWM70-1203D 90 1200 Mixed 1000 7kg 800 Spin/Drain 400 HIGH SPEED Wash Temp.Spin Speed Intense Extra Rinse Start/Pause 1200rpm Arial Regular18pt ,100%black colour (7kg Model shown) A B C D E F G H A Detergent/Softener Drawer G Extra Rinse B Power Button H Start/Pause Button C Program Dial I ECO D Wash Temp J LED Display E Spin Speed K Delay F Intense button OPER
ページ9に含まれる内容の要旨
09 Before use e ¬s pin s peed _ Touch this button lightly to select the desired speed. When a speed is set, it will be displayed on the indicator.note: if there is no indicator light displayed, it means no spinning. Note: Different water temperatures and spinning speeds can be set for different laundries. wash using the default settings if there is no special requirement. f ¬intense button _if the laundry is heavily soiled, press this button before starting the program. When the button is
ページ10に含まれる内容の要旨
2 3 1 2 1 10 USING THE APPLIANCE PROGRAM SELECTION PROGRAM MODES 2 1 Detergent compartment for prewash mode 2 Detergent compartment 3 Compartment for softener HWM70-1203D HWM80-1403D Preset spin speed Program Maximum Preset 2 3 1 Laundry Type Preset spin speed 1 ¬ Wool - - to 40 °C 30°C Woolen fabrics 400 rpm 400 rpm 1000 rpm 2 ¬ Synthetic - - to 60 °C 40°C Fast colour synthetic 1000 rpm 1000 rpm 3 ¬ Eco - - to 90 °C 40°C Cotton fabrics 1000 rpm 1400 rpm 4 ¬ Standard - - t
ページ11に含まれる内容の要旨
11 USING THE APPLIANCE CONSUMPTION AND TECHNICAL DATA CONSUMPTION TABLE This washing machine is for domestic use only. If the machine is used for commercial purposes the warranty will be void. Do not use for purposes other than that for which it was designed. Follow the instructions given on the label of each garment and wash only machine-washable garments. HWM80-1403D HWM70-1203D PROGRAM MAX.LOAD TEMPERATURE WASHING TIME PROGRAM MAX.LOAD TEMPERATURE WASHING TIME 2 kg 30°C 1:00 h ¬ Wool
ページ12に含まれる内容の要旨
12 using the APPLiAnCe WAshing methods L p A e se note This washing machine is for domestic use only. if the machine is used for commercial purposes the warranty will be void. Do not use for purposes other than that for which it was designed. follow the instructions given on the label of each garment and wash only machine-washable garments. POwER SUPPLy connect the washing machine to the power supply (220V to 240V~/50hz). wATER CONNECTION connect the hose to the cold water connection.Turn on
ページ13に含まれる内容の要旨
2 3 1 2 1 13 USING THE APPLIANCE S C 90 RPM 1200 HWM70-1203D Mixed 1000 7kg 800 400 Spin/Drain Wash Temp.Spin Speed Intense Extra Rinse Start/Pause HIGH SPEED LOADING THE MACHINE 1200rpm Arial Regular 18pt ,100%black colour ¬ When first using the washing machine, let it run unloaded for one program to prevent the laundry from being tainted by oil or dirty water from the washing machine. Before washing you should run the machine without laundry, but with detergent, with 60°C program. ¬ Open t
ページ14に含まれる内容の要旨
14 USING THE APPLIANCE S SETTING WASHING TEMPERATURE C RPM 90 1200 Mixed 1000 800 Press and hold down the temperature button until the desired temperature is selected . 400 Spin/Drain Wash Temp.Spin Speed Intense Extra Rinse SETTING SPIN SPEED Press and hold down the “Spin Speed” (E) button until the desired speed is selected. S C RPM 90 1200 Mixed See "Operational functions" on the "Control Panel" pages (08 and 09) for selecting 1000 800 temperature and spin speed.Set to the value recommended
ページ15に含まれる内容の要旨
15 USING THE APPLIANCE CARE CHART Resistant material Bleachable in cold water Don't dry clean Delicate fabric Do not bleach Dry flat Washable at 95 °C Iron at 200 °C Hung to dry Washable at 60 °C Iron at 150 °C Dry on clothes hanger Washable at 40 °C Iron at 100 °C Tumble dry, normal heat Washable at 30 °C Don't iron Tumble dry, reduced heat Hand wash Dry cleaning with any solvent Don't tumble dry Dry clean only Dry cleaning with pericloride Wool Seal Dry cleaning with aviation fuel Bed sheet (s
ページ16に含まれる内容の要旨
16 maintenance cLA e ning & cAre AfTER w AShINg Turn off the water supply and pull out electricity plug(fig.1) after each wash. open the washer door to prevent formation of moisture and odours. if the washing machine is left idle for a long period, turn off water supply (fig.1b)drain the water in the machine and replace the drain hose. f ig.1 f ig.1b CLEANINg ThE DETERgENT DRA wER 1. clean the detergent/softener drawer regularly. REMOVINg DETERgENT DRA wER 2. slide out draw (in direction sh
ページ17に含まれる内容の要旨
17 MAINTENANCE WATER INLET VALVE AND INLET VALVE FILTER To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve and inlet valve filter regularly. MOVING THE MACHINE If the machine is to be moved to a distant location, replace the transportation bolts removed before installation to prevent damage as shown below. 1. Remove the back cover. 2. Remove the blanking plugs. 3. Insert the synthetic stabilisers and the transportation bolts. 4. Tighte
ページ18に含まれる内容の要旨
18 maintenance dispLA y codes DISPLAy CODES AND SPECIAL fUNCTIONS coDes causes soluTions err1 ¬ Door is not properly shut. _ shut the door properly. err2 ¬ Drainage error, water not emptied within 6 _ clean the filter and check the drain hose for blockage. if error minutes. still exists, please contact the maintenance personnel. err3 ¬ Temperature sensor not properly connected or _ contact the maintenance personnel. damaged. err4 ¬ heater error (appears at the end of a cycle). _ r educe load an
ページ19に含まれる内容の要旨
19 maintenance troubLeshooting TROUBLEShOOTINg The following circumstances do not mean there is a fault with the appliance. contact the customer care Team when you have confirmed the problem after following the instructions below. problem causes soluTions Washing machine fails to ¬ poor connection to the power supply. _ check connection to the power supply. operate. ¬ power failure. _ check the power supply. ¬ The washer door is not properly closed. _ close the washer door properly. ¬ machin
ページ20に含まれる内容の要旨
Ipamrnott Safety Irfonmta Ino 20 Do not use a multiple socket extension cord. a separate earthed socket is required which shall be accessible at all times. if the mains cord becomes damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person with a lead of the same type and rating to avoid a hazard. never remove the plug from the socket by pulling on the cord, always grasp the plug. The door may get hot during use, do not touch it and keep children away wh
