ページ1に含まれる内容の要旨
ge.com
Safety Information . . . . . . . . . . . . . 2, 3
Owner’s Manual &
Installation Instructions
Operating Instructions
Control and Indicator Settings . . . . . . .5, 6
WSLS1100
Loading and Using the Washer . . . . . .7, 8
WSLP1100
Special Washer Features . . . . . . . . . . . . . .4
Installation Instructions
Alcove or Closet Installation . . . . . . . . . . 12
Electrical Requirements . . . . . . . . . . . . . . 10
Grounding Instructions . . . . . . . . . . . . . . . 10
Installation Requireme
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. For your safety, the information in this manual must be followed to minimize the risk of fire WARNING! or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. WATER HEATER SAFETY Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more. Hydrogen gas can be explosive under these circumstances. If the hot water has not been used for t
ページ3に含まれる内容の要旨
Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support ge.com WHEN NOT IN USE Turn off water faucets to relieve pressure on Do not attempt to repair or replace any part of hoses and valves and to minimize leakage if this appliance unless specifically recommended a break or rupture should occur. Check the in this Owner’s Manual, or in published user- condition of the fill hoses; they may need repair instructions that you understand and repla
ページ4に含まれる内容の要旨
Special washer features. Before starting the washer: • Load the laundry in the washer. • Add the detergent and fabric softener to the dispenser drawer. • Add bleach (if needed) to the bleach dispenser. Detergent and Fabric Softener Dispenser Drawer The detergent and fabric softener To Use the Fabric Softener Dispenser: Maximum Fill Tower dispensers will automatically release their Use only liquid fabric softener. Pour into contents at the proper time during the dispenser, using amount recommend
ページ5に含まれる内容の要旨
Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support About the control and indicator settings. ge.com Before starting the washer: • Load the laundry in the washer. • Add the detergent and fabric softener to the dispenser drawer. • Add bleach (if needed) to the bleach dispenser. To Use Automatic One-Touch Washing START PAUSE The LOAD SENSING feature automatically senses the size of your load, fills with the appropriate amount of water and calc
ページ6に含まれる内容の要旨
About the control and indicator settings. 3 LOAD SIZE Loosely load clothes no higher than the top row of holes in the washer basket. The water level should just cover the clothes. Adjust the load size accordingly. 4 WASH CYCLE These wash cycles control the length of the washing process. The chart below will help match the WASH CYCLE setting to your specific laundry needs. When a cycle is selected, the automatic temperature that the machine defaults to, can be changed to whatever temperature you
ページ7に含まれる内容の要旨
Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support Loading and using the washer. Always follow fabric manufacturer’s care label when laundering. ge.com Sorting Wash Loads Sort by color (whites, lights, colors), soil level, fabric type (sturdy cottons, easy care, delicates), and whether the fabric produces lint (terry cloth, chenille), or collects lint (velveteen, corduroy). Proper Use of Detergent Add clothes and detergent, then start the
ページ8に含まれる内容の要旨
Loading and using the washer. Fabric Care Labels Below are fabric care label “symbols” that affect the clothing you will be laundering. WASH LABELS Machine wash Normal Permanent Press/ Gentle/ Do not wash Do not wring cycle Hand wash wrinkle resistant delicate Water temperature Hot Warm Cold/cool (50°C/120°F) (40°C/105°F) (30°C/85°F) DRY LABELS Tumble dry Do not dry Dry Normal Permanent Press/ Gentle/ (used with Do not tumble dry wrinkle resistant delicate do not wash) Heat setting High Medium L
ページ9に含まれる内容の要旨
Installation Washer WSLS1100 WSLP1100 Instructions If you have questions, call 800.GE.CARES or visit our Website at: ge.com PLUMBING BEFORE YOU BEGIN • WATER PRESSURE—Must be 10 p.s.i. minimum to Read these instructions completely and carefully. 150 p.s.i. maximum dynamic pressure measured at • faucet. IMPORTANT – Save these instructions for local inspector’s use. • WATER TEMPERATURE—Household water heater should be set to deliver water at 120° to 150°F • IMPORTANT – Observe all (50° to 66°
ページ10に含まれる内容の要旨
Installation Instructions CAUTION: Before plugging in washer, read the following electrical requirements. LEVELING THE WASHER— ELECTRICAL REQUIREMENTS STATIONARY MODELS CAUTION: For personal safety, do Before connecting the hoses, the washer must be level. not use an extension cord or adapter plug with this Leveling locks are located at the bottom front of the appliance. left and right sides of the washer. Do not, under any circumstances, cut or remove the third grounding prong from the power
ページ11に含まれる内容の要旨
Installation Instructions WASHER CONNECTIONS FOR STATIONARY MODEL WSLS1100 WARNING: Make sure the washer is unplugged. 1 4 FLUSH WATER LINES CONNECT DRAIN HOSE Run some water from the hot and cold faucets to flush Form a U shape on the end of the drain hose with the the water lines and remove particles that might clog hose pointed toward the drain. Place the hose in a the water valve screens. laundry tub or stand pipe and secure it with a cable tie (not included). NOTE: If the drain hose is plac
ページ12に含まれる内容の要旨
Installation Instructions WASHER CONNECTIONS FOR STATIONARY MODEL WSLS1100 (CONT.) 6 INSTALLATION CHECKLIST 8 REMOVE THE PROTECTIVE FILM COVERING THE CONTROL PANEL Before starting the washer, check to make sure: ❏ Main power is turned on. ❏ The washer is plugged in. ❏ The water faucets are turned on. ❏ The unit is level. ❏ The drain hose is properly tied up. ❏ There are no leaks at the faucet, drain line or washer. 9 READ THE REST OF THIS 7 RUN THE WASHER THROUGH A OWNER’S MANUAL COMPLETE CYCLE
ページ13に含まれる内容の要旨
Installation Instructions WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1100—ONE-FAUCET CONNECTIONS Use the hose connector provided with the washer for a one-faucet connection. 3 CONNECT TO VALVE INLET Attach the COLD water supply connector to the TO CONNECT THE WASHER: COLD water valve inlet (color BLUE). Make sure the washer is inside the connector before ® tightening. 1 REMOVE THE UNI-COUPLE HOSE FROM INSIDE THE WASHER BASKET Drain Connection Faucet Connector COLD Water Supply Connector 4 TIGHTE
ページ14に含まれる内容の要旨
Installation Instructions WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1100—ONE-FAUCET CONNECTIONS (CONT.) 6 MAKE SURE THE TEMPERATURE 9 REMOVE THE PROTECTIVE FILM SELECTOR IS SET AT COLD/COLD COVERING THE CONTROL PANEL 7 SLOWLY TURN ON THE WATER FAUCET ALL THE WAY TO THE DESIRED TEMPERATURE SETTING 10 INSTALLATION CHECKLIST Before starting the washer, check to make sure: ❏ Main power is turned on. ❏ The washer is plugged in. ❏ The water faucets are turned on. ❏ The unit is level. ❏ There are no le
ページ15に含まれる内容の要旨
Installation Instructions TO DISCONNECT THE WASHER: 1 4 TURN WATER FAUCET OFF DISCONNECT FROM WATER LINE Move the locking collar down and pull the hose connector down to disengage from the faucet adapter. Locking Collar Hose Connector 2 UNPLUG POWER CORD AND RETURN IT TO THE STORAGE 5 AREA DRAIN WATER Drain water from the hoses through the hose connector. 3 PRESS THE RED WATER FLOW BUTTON TO RELEASE THE WATER PRESSURE Water Flow Button Hose Connector 15
ページ16に含まれる内容の要旨
Installation Instructions WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1100—TWO-FAUCET CONNECTIONS If you have two separate water connections, your washer can be connected to both the hot and cold water faucets. 3 PLUG THE POWER CORD INTO A This kit can be purchased from your dealer or from Parts 3-PRONG GROUNDED OUTLET and Accessories. In the United States, call 800.626.2002. In Canada, consult the yellow pages for your local Camco number. TO CONNECT THE WASHER: 1 CONNECT TO WATER LINE Insure pr
ページ17に含まれる内容の要旨
Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support Before you call for service… ge.com Troubleshooting Tips Save time and money! Review the charts on the following pages first and you may not need to call for service. Status Indicators Press POWER ON/OFF to turn off the washer. Call for service. IE When the cycle has started but water has not filled the wash basket within 60 minutes, a signal will sound and this code will be displayed
ページ18に含まれる内容の要旨
Before you call for service… Troubleshooting Tips WATER POSSIBLE CAUSES WHAT TO DO Too many suds Type of detergent • Switch to a lower sudsing detergent brand and follow instructions on package. Very soft water • Try less detergent. Too much detergent • Measure your detergent carefully. Use less soap if you have soft water, a smaller load or a lightly soiled load. Water leaks Fill hoses or drain hose is • Make sure hose connections are tight at faucets and the improperly connected washing ma
ページ19に含まれる内容の要旨
Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support ge.com OPERATION POSSIBLE CAUSES WHAT TO DO Washer pauses during The washer normally pauses wash cycle between washing steps Washer pauses during This is normal • The washer may pause during the spin cycle to remove spin cycle soapy water more efficiently. Washer won’t operate Washer is unplugged • Make sure cord is plugged securely into a working outlet. Water supply is turned off • Turn
ページ20に含まれる内容の要旨
Before you call for service… Troubleshooting Tips PERFORMANCE (cont’d) POSSIBLE CAUSES WHAT TO DO Snags, holes, tears, rips Pins, snaps, hooks, sharp • Fasten snaps, hooks, buttons and zippers. or excessive wear buttons, belt buckles, • Remove loose items like pins, objects in pockets zippers and sharp objects and sharp buttons. left in pockets • Turn knits (which snag easily) inside out. Undiluted chlorine bleach • Check bleach package instructions for proper amount. • Never add undiluted blea
