ページ1に含まれる内容の要旨
Clothes washer
Installation instructions
WH60F60W*, WH70F60W*
and User guide
& WH80F60W* models
NZ AU SG
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
1 Contents Safety and warnings 2 Installation instructions 4 Initial preparations for washing 8 Selecting a programme and operating your machine 10 Care and cleaning 17 Troubleshooting 20 Specifications 21 Manufacturer’s Warranty 22 Customer Care 24 Important! SAVE THESE INSTRUCTIONS The models shown in this User Guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit o
ページ4に含まれる内容の要旨
2 Safety and warnings General safety ■■ Never place your machine on a carpet covered floor. A lack of airflow from beneath your machine may cause electrical parts to overheat. ■■ Secure the drain hose into the standpipe or tub to prevent any water leakage and to allow machine to discharge water as required. Ensure that the inlet and drain hoses are not folded, squashed, or broken when the appliance is pushed into place after it is installed or cleaned. ■■ There may be some water in your mac
ページ5に含まれる内容の要旨
3 Safety and warnings Safety instructions ■■ You must remove the safety bolts (on the back panel) and the packing reinforcement (underneath the machine) before use. ■■ This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity. ■■ Never open the loading door or remove the filter while there is still water in the drum. ■■ Unplug the machine when it is not in use. ■■ Never touch the plug with wet hands. ■■ Do not operate the machine if the power cord or plug
ページ6に含まれる内容の要旨
4 Installation instructions Remove the packaging ■■ Remove the packaging reinforcement underneath the product by tilting the machine and pulling the extruding ribbon. Not doing so may cause damage to your floor during normal operation of the machine. Removing the transit safety bolts ■■ The clothes washer is fitted with transit safety bolts at the rear to avoid any possible damage to the interior during transportation. Important! The transit bolts MUST be removed prior to operation of the ma
ページ7に含まれる内容の要旨
5 Installation instructions Adjusting the feet ■■ In order for quiet and stable operation, the machine should be placed properly and levelled on its feet. ■■ If the machine is unstable: 1 Loosen the plastic lock nut. 2 Screw or unscrew the adjustable foot until the machine stands firmly level. 3 Tighten the lock nut for stability. Lock nut Adjustable foot Fig.2 Levelling foot adjustment Note: adjust lock nuts by hand. Do not use any tools to loosen or tighten the lock nuts, as they
ページ8に含まれる内容の要旨
6 Installation instructions Inlet hoses Important! The appliance must be connected to the cold water mains using the new hose supplied. Old hoses should not be reused. ■■ Connecting the hose: 1 Connect the straight end of the inlet hose to the tap. There are washers fitted to both ends. 2 C onnect the elbow end of the inlet hose to the inlet valve on the back of the machine. The cold inlet valve is marked in blue. Fig.3 Connection of the inlet hose to the machine
ページ9に含まれる内容の要旨
min. 40 cm max. 100 cm 7 Installation instructions Connecting to the drain ■■ The water drain hose should be placed either at the side of a basin or tub, or connected directly to the wastewater standpipe. ■■ The elbow/guide, supplied with the machine, should be fitted to the drain hose before being connected directly into the tub or wastewater standpipe. ■■ The drain hose should not be sharply bent. ■■ The drain hose needs to be kept at an elevated height of at least 400 mm with a maximum
ページ10に含まれる内容の要旨
8 Initial preparations for washing Preparing clothes for washing ■■ Always follow the advice on the garment care label. It will tell you about the fabric of the garment and how it should be washed. ■■ Sort the laundry according to type of fabric, colour, degree of soiling, and allowable water temperature. ■■ Check and empty pockets. Coins, safety pins, etc can damage both your machine and your clothes. ■■ Remove any metal attachments, or place the items in a laundry bag, pillowcase, or so
ページ11に含まれる内容の要旨
9 Initial preparations for washing Detergents and softeners Detergent drawer The detergent drawer is composed of three main compartments: – (I) for prewash – (II) for main wash – (III) siphon – ( ) for softener Fig.5 Detergent drawer compartments Detergent, softener and other cleaning agents Add detergent and softener before starting the wash programme. Important! ■■ Never open the detergent dispenser drawer while the washing programme is running! ■■ When using a programme without pre-wash,
ページ12に含まれる内容の要旨
10 Selecting a programme and operating your machine Control panel 9 8 7 6 5 4 3 2 1 Fig.6 Control panel (same for 6 kg, 7 kg and 8 kg models) 1 Spin speed adjustment button 6 Display screen 2 Time delay button 7 Child-proof lock indicator 3 Additional function buttons 8 Programme follow-up indicators 4 START/PAUSE and CANCEL button 9 ON/OFF button 5 Programme selection knob Using your machine 1 Ensure the machine is plugged in. 2 Turn the tap on completely. 3 Check that the hose is connec
ページ13に含まれる内容の要旨
11 Selecting a programme and operating your machine Programme should be selected depending on the type of fabric, colour, degree of soiling and permissible water temperature for the load. The following table serves as a guide for making your decision. Max Size Temp Pre- Quick Rinse Programme Fabric type Description of programme load (kg)* (ºC) wash wash plus (kg) Cottons Durable clothes A vigorous wash action 8 8 90 • • • during a longer wash cycle. 8 8 60 • • • 8 8 40 • • • 8 8 Cold •
ページ14に含まれる内容の要旨
12 Selecting a programme and operating your machine Max Size Temp Pre- Quick Rinse Programme Fabric type Description of programme load (kg)* (ºC) wash wash plus (kg) 8 4 40 • • • Shirts Cotton and Cotton and synthetic shirts synthetic shirts can be washed together 7 3 40 • • • (no sorting is required). 6 3 40 • • • 8 3 30 • Delicate Delicate fabrics A sensitive wash action and a slow spin provide extra 7 2 30 • care for delicates. 6 2 30 • 8 2 40 Woollens Machine- It is important to s
ページ15に含まれる内容の要旨
13 Selecting a programme and operating your machine Spin speed selection Whenever a new programme is selected, the maximum spin speed of the selected programme is displayed on the spin speed indicator. To decrease the spin speed, press the SPIN button. The spin speed decreases gradually, then the RINSE HOLD and NO SPIN options are shown respectively. Rinse hold is shown with “ ” and no spin is shown with “ ” symbols. If you do not want to unload your clothes immediately after the programme,
ページ16に含まれる内容の要旨
14 Selecting a programme and operating your machine Time display The display shows the time remaining for the programme to complete while a programme is running. Programme duration may differ from the values in the consumption table subject to the changes in the water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, additional functions selected, and changes in the supply voltage. Time delay With the TIME DELAY function you can delay the programme s
ページ17に含まれる内容の要旨
15 Selecting a programme and operating your machine Changing the selections after the programme has started ■■ Turning the programme knob while the programme is in operation will not change the programme. ■■ The programme needs to be paused or cancelled before changes can be made. Door lock ■■ The loading door cannot be opened whilst the READY lamp is flashing due to safety reasons. ■■ Once the READY lamp lights continuously the door is able to be opened. Adding additional laundry Press t
ページ18に含まれる内容の要旨
16 Selecting a programme and operating your machine Child-proof lock ■■ You can protect the appliance from being tampered by activating the child-proof lock. ■■ When activated, no change can be made to the programme running. To activate the child-proof lock: 1 Press the 1st and 2nd additional function buttons for 3 seconds. 2 The “C ON” (child lock is activated) symbol appears on the screen. Note: the child lock symbol will also be displayed whenever any button is pressed while the machine
ページ19に含まれる内容の要旨
17 Care and cleaning Detergent drawer Remove any powder residue buildup in the drawer. Note: if more than a normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned. To remove and clean the detergent drawer and siphon: 1 Open the detergent drawer. 2 Press the dotted point on the siphon in the softener compartment. 3 Pull the compartment towards you until it is removed from the machine. 4 Wash the dispenser drawer and the siphon
ページ20に含まれる内容の要旨
18 Care and cleaning To clean the filter at the machine end: 1 Turn off the tap. 2 Disconnect the hose. 3 Clean the filter with a thin brush. If the filter is very dirty, you may clean it by pulling it out with pliers (remember to refit the filter after cleaning). 4 Refit the hose and turn the tap back on. To clean the filter at the tap end: 1 Turn off the tap. 2 Disconnect the hose. 3 Remove the filter by hand. 4 Clean the filter by rinsing under the tap. 5 Refit hose and turn tap b
