ページ1に含まれる内容の要旨
LAVAMAT 74800
Washing Machine
User information
ページ2に含まれる内容の要旨
Dear Customer, Please read this user information carefully and keep it to refer to later. Please pass the user information on to any future owner of the appli- ance. The following symbols are used in the text: 1 Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance. 3 Useful tips and hints 2 Environmental information 2
ページ3に含まれる内容の要旨
Contents Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Control panel . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Installation and connection instructions. . . . . . . . . . . . . . . . . 25 Safety information concerning installation . . . . . . . . . . . . . . . . . . . . . . . . 25 Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Removing the transit packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Where
ページ5に含まれる内容の要旨
Operating Instructions 1 Safety Prior to using the appliance for the first time • Follow the “Installation and connection instructions”. If the appliance is delivered in the winter months when there are mi- nus temperatures: store the washing machine at room temperature for 24 hours before using for the first time. Correct use The washing machine is only designed for the washing of normal do- mestic laundry at home. Additions or modifications to the washing machine are not permit- ted.
ページ6に含まれる内容の要旨
Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug from the power point or – if the appliance has been hard-wired – switch off the cut- out in the fuse box or completely remove the fuse. If operation is stopped, disconnect the appliance from the mains sup- ply and turn off the tap. Never remove the power plug from the power point by pulling on the cable. Always pull the plug. Multiway-plugs, connectors and extension cab
ページ7に含まれる内容の要旨
Description of the appliance Control panel Detergent drawer Rating plate (behind door) Plinth flap/ Screw feet Drain pump (height adjustable) Control panel Multi-display Spin/RINSE HOLD button Programme progress display DELAY TIMER button Additional programme DOOR indicator Programme selector buttons START/PAUSE button OVERDOSING indicator 7
ページ8に含まれる内容の要旨
Programme tables Additional programmes Spin speed Programme 2) ENERGY SAVING 6kg - COTTONS/LINEN 3) 6kg 95, 60, 40, 30 40-60 MIX 6kg - EASY-CARES 3) 3kg - 60, 50, 40, 30 EASY IRON 40 1kg - - DELICATES 3kg - - - 40, 30 WOOL/SILK H (Hand-washing) 2kg - - - - - - 40, 30, COLD GENTLE RINSE 3kg - - - - - - DRAIN - - - - - - - - - - - SPIN 6kg - - - - - - REFRESH 3kg - - - -
ページ9に含まれる内容の要旨
Care Washing types and care symbols 1) symbols Energy-saving programme which washes at 60 °C for lightly to normally soiled M O whites or coloureds made of cotton/linen. J M O Programme for normally to heavily soiled whites/coloureds made of cotton/linen. J M Programme for cottons/linen, which is indicated for various wash temperatures. Items which according to their care label are normally washed separately at 40 °C or at 60 °C, can be washed together in this programme. In this way the dr
ページ10に含まれる内容の要旨
Before the first wash 1.Open the detergent drawer. 2.Pour approx. 1 litre of water through the detergent drawer into the washing machine. This closes the water container when the next programme is started and the economy valve can function properly 3.To remove any production-related residues from the drum and water tank, perform the first wash cycle without a load. Programme: COT- TONS/LINEN 60, press the TIME SAVER button, add approx. 1/4 measur- ing cup of detergent. Preparing and sorting
ページ11に含まれる内容の要旨
Running a wash cycle Opening the door/loading washing 1.Open the door: pull the handle on the door. When the appliance is switched on, the DOOR and START/PAUSE indica- tors show whether the door can be opened: DOOR indicator START/PAUSE indicator Can the door be opened? flashing red or not illumi- illuminated green yes nated yes, after pressing the illuminated green illuminated red START/PAUSE button During the programme the door is locked when the water level or the temperature is high. The
ページ12に含まれる内容の要旨
Water softener should be used from water hardness range 2 (=medi- um). The amount of detergent used can then always be that as for hardness range 1 (=soft). Your local water company will provide you with information about water hardness in your area. 1.Pull out the detergent drawer as far as it will go. 2.Add the detergent/conditioner. 3.Push the detergent drawer in fully. Stain removal agent/ Washing powder/tablets stain removal tablets for the main wash cycle Washing powder/tablets Cond
ページ13に含まれる内容の要旨
Switching on the appliance/selecting a programme Set the programme and tempera- ture using the programme selector. 3 The appliance is switched on by se- lecting a programme. – The programme progress display shows the programme steps that the selected programme will car- ry out. – The estimated programme dura- tion (in minutes) appears in the multi-display. Changing the spin speed/selecting rinse hold The washing machine suggests the maximum permitted spin speed suitable for the selected pr
ページ14に含まれる内容の要旨
Selecting additional programmes If required, press additional pro- gramme button(s). The correspond- ing indicator will illuminate. 3 If “Err” flashes in the multi-display, the selected additional programme cannot be used together with the wash programme set. RINSE + Two additional rinse cycles are carried out for the programmes ENERGY SAVING, COTTONS/LINEN, DELICATES, EASY-CARES and EASY IRON (for example in cases of over-sensitive skin). TIME SAVER Shortened wash programme for lightly s
ページ15に含まれる内容の要旨
Setting the delay timer 3 Using the DELAY TIMER button you can delay the start of a programme by 30 minutes (30') to a maximum of 23 hours (23h). 1.Select the programme. 2. Press the DELAY TIMER button repeatedly until the desired start delay is shown in the multi-display, e.g. 12h to delay the start of the pro- gramme by 12 hours. The DELAY TIMER indicator will illuminate. 3 If the display is showing23h and you press the button again, the time delay will be cancelled. 0’ will appear follo
ページ16に含まれる内容の要旨
Interrupting a programme/adding washing Interrupting a programme A programme can at any time be interrupted by pressing the START/ PAUSE button and resumed by pressing START/PAUSE again. To cancel a programme before it has ended, turn the programme se- lector to OFF. Important: Be careful of water in the appliance. Adding washing Washing can be added, as long as the DOOR indicator is illuminated green. 1.Press the START/PAUSE button. The door can be opened. 2.Close the door and press the ST
ページ17に含まれる内容の要旨
Child safety device If the child safety device has been activated, the door can no longer be shut. Activating the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise di- rection as far as it will go. 1 Warning! The knob must not be de- pressed after being set, otherwise the child safety device is not acti- vated. The knob must stand proud as shown in the illustration. Deactivating the child safety device: Turn the knob in an anti-clockwise direction
ページ18に含まれる内容の要旨
Cleaning and care Important: Do not use furniture cleaning products or aggressive clean- ing agents to clean the appliance. Wipe over the control panel and housing with a damp cloth. Detergent drawer The detergent drawer should be cleaned regularly. 1.Remove the detergent drawer by pulling firmly. 2. Remove the softener insert from the middle compartment. 3.Clean all parts with water. 4.Place the softener insert in as far as it will go, so that it is firmly in posi- tion. 5.Clean the entire
ページ19に含まれる内容の要旨
What to do if... Remedying small faults yourself If during use of the appliance one of the following error codes is shown in the multi-display: – E10 (Problems with the water inflow), – E20 (Problems with the water outflow), – E40 (door open), please consult the following table. After the error has been remedied, press the START/PAUSE button. In the event of other errors (E and a number or letter): Switch the ap- pliance off and then on again. Set the programme again. Press the START/PAUSE but
ページ20に含まれる内容の要旨
Problem Possible cause Remedy E10 appears. The tap is shut off. Turn on the tap. The END indicator is Turn off the tap. Unscrew the flashing once, and si- The filter in the inlet hose hose, remove the filter and multaneously an acous- screw connection is blocked. clean it. tic signal is sounding once. The tap is blocked by limes- Check the tap and have it re- (Problems with the wa- cale or faulty. paired, if necessary. ter inflow.) The transit packaging has Remove the transit packag- not be
