ページ1に含まれる内容の要旨
LAVAMAT 62825
Washing Machine
User information
ページ2に含まれる内容の要旨
Dear Customer, Please read this user information carefully and keep it to refer to later. Please pass the user information on to any future owner of the appli- ance. The following symbols are used in the text: 1 Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance. 3 Useful tips and hints 2 Environmental information 2
ページ3に含まれる内容の要旨
Contents Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Programme overview . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Installation and connection instructions. . . . . . . . . . . . . . . . . 25 Safety information concerning installation . . . . . . . . . . . . . . . . . . . . . . . . 25 Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Operating Instructions 1 Safety Prior to using the appliance for the first time • Follow the “Installation and connection instructions”. � If the appliance is delivered in the winter months when there are mi- nus temperatures: store the washing machine at room temperature for 24 hours before using for the first time. Correct use � The washing machine is only designed for the washing of normal do- mestic laundry at home. � Additions or modifications to the washing machine are not permit- ted. �
ページ6に含まれる内容の要旨
General safety � Repairs to the washing machine may only be carried out by qualified/ authorised service engineers. � Never use the appliance when the electrical cable is damaged or the control panel, worktop or plinth area are damaged to such an extent that the inside of the appliance is openly accessible. � Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug from the power point or – if the appliance has been hard-wired – sw
ページ7に含まれる内容の要旨
Description of the appliance Detergent dispenser Control panel drawer Rating plate (behind door) Plinth flap/ Screw feet Drain pump (height adjustable) Control panel Spin/RINSE HOLD button Multidisplay Programme progress display Additional programme DOOR indicator Programme selector buttons START/PAUSE button 7
ページ8に含まれる内容の要旨
Programme overview Additional programmes Spin speed Programme 2) ENERGY SAVING 6kg � � � � � � COTTONS/LINEN 3) 4) 6kg � � � � � � � 95, 60, 50, 40, 30 EASY CARES 4) 3kg � � � � � � 60, 50, 40, 30, 20 DELICATES 3kg � � � � � 40, 30 WOOL/ H (Hand-washing) 2kg � � 40, 30, COLD RINSE 3kg � � DRAIN SPIN 6kg � � REFRESH 3kg � � 1) A 10 litre bucket contains approx. 2.5 kg dry washing (cotton) 2) Programme settings for tests in accordance with or in the style of EN 60 456 and IEC 60 456 are described
ページ9に含まれる内容の要旨
Care Application/Features 1) symbols Energy-saving programme which washes at 60 °C for lightly to normally soiled M O whites or colours made of cotton/linen. J M O Programme for normally to heavily soiled whites/colours made of cotton/linen. I K N Programme for easy-care mixed fibres and synthetics. Gentle programme for delicate textiles such as bonded fibres, micro-fibres, syn- I K 2 thetics, net curtains (load max. 20 to 25 m curtains). If used together with RINSE HOLD, also suitable for
ページ10に含まれる内容の要旨
Before the first wash 1. Open the detergent drawer. 2.Pour approx. 2 litres of water through the detergent drawer into the washing machine. This closes the water container when the next programme is started and the economy valve can function properly 3.To remove any production-related residues from the drum and water tank, perform the first wash cycle without a load. Programme: COT- TONS/LINEN 95, press the TIME SAVER button, add approx. 1/4 measur- ing cup of detergent. Preparing and sorti
ページ11に含まれる内容の要旨
Running a wash cycle Opening the door/loading washing 1. Open the door: pull the handle on the door. When the appliance is switched on, the DOOR and START/PAUSE indica- tors show whether the door can be opened: DOOR indicator START/PAUSE indicator Can the door be opened? flashing red or not illumi- illuminated green yes nated yes, after pressing the illuminated green illuminated red START/PAUSE button illuminated red flashing red no, water level and/or or not illuminated or illuminated red te
ページ12に含まれる内容の要旨
hardness range 1 (=soft). Your local water company will provide you with information about water hardness in your area. 1. Pull out the detergent drawer as far as it will go. 2. Add the detergent/conditioner. 3. Push the detergent drawer in fully. Stain removal agent/ Washing powder/tablets stain removal tablets for the main wash cycle Washing powder/tablets Conditioner/Wash-care for the pre wash cycle products to preserve the or water softener shape of garments/Starch Washing powder/tabl
ページ13に含まれる内容の要旨
Changing the spin speed/selecting rinse hold The washing machine suggests the maximum permitted spin speed suitable for the selected pro- gramme. You can reduce this spin speed: To do this, press the Spin/RINSE HOLD button repeatedly until the required indicator is illuminated. 3 The spin speed for the final spin can be changed even during the pro- gramme. To do this: 1.Press the START/PAUSE button. 2. Change the spin speed. 3.Press the START/PAUSE button again. RINSE HOLD With RINSE HOLD
ページ14に含まれる内容の要旨
PRE WASH Warm pre-wash before the main wash that follows automatically; with intermediate spin for COTTONS/LINEN and EASY-CARES, without inter- mediate spin for DELICATES. STAIN For heavily soiled or stained washing. Stain removal agent will be rinsed into the wash at the optimum point in the programme. Can only be set for wash temperatures of 40°C and upwards as stain re- movers only become effective at higher temperatures. Starting a programme 1. Check that the tap is turned on. 2. Press t
ページ15に含まれる内容の要旨
Interrupting a programme/adding washing Interrupting a programme � A programme can at any time be interrupted by pressing the START/ PAUSE button and resumed by pressing START/PAUSE again. � To cancel a programme before it has ended, turn the programme se- lector to OFF. Important: Be careful of water in the appliance. Adding washing Washing can be added, as long as the DOOR indicator is illuminated green. 1.Press the START/PAUSE button. The door can be opened. 2. Close the door and press the S
ページ16に含まれる内容の要旨
Child safety device If the child safety device has been activated, the door can no longer be shut. Activating the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise di- rection as far as it will go. 1 Warning! The knob must not be de- pressed after being set, otherwise the child safety device is not acti- vated. The knob must stand out as shown in the illustration. Deactivating the child safety device: Turn the knob in an anti-clockwise direction as
ページ17に含まれる内容の要旨
Cleaning and maintenance Important! Do not use furniture care products or aggressive cleaners to clean the appliance. Wipe control panel and body with a damp cloth. Cleaning procedure If you plan to wash mainly at low temperature, you should run a hot programme from time to time. This will reduce any deposits and clean the appliance from the inside. Detergent dispenser drawer The detergent dispenser drawer should be cleaned regularly. 1.Remove the detergent dispenser drawer by pulling it fir
ページ18に含まれる内容の要旨
Door and rubber collar Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door. Clean the glass in the door and the rubber collar regularly. What to do if... Remedying small faults yourself If during use of the appliance one of the following error codes is shown in the multi-display: –E10 (Problems with the water inflow), –E20 (Problems with the water outflow), –E40 (door open), please consult the following table. Aft
ページ19に含まれる内容の要旨
Problem Possible cause Remedy E10 appears. The tap is shut off. Turn on the tap. The END indicator is Turn off the tap. Unscrew the flashing once, and si- The filter in the inlet hose hose, remove the filter and multaneously an acous- screw connection is blocked. clean it. tic signal is sounding once. The tap is blocked by limes- Check the tap and have it re- (Problems with the wa- cale or faulty. paired, if necessary. ter inflow.) The transport lock has not Removing the transport lock. be
ページ20に含まれる内容の要旨
Problem Possible cause Remedy Conditioner has not The softener insert in the been rinsed in, com- Clean the detergent drawer, compartment for condition- partment w for condi- insert the conditioner insert ers has not been correctly tioner is filled with firmly. inserted or is blocked. water. Wait until the DOOR indica- The door is locked. tor is illuminated green. The programme will continue when the power cut has end- The door cannot be ed. There has been a power cut. opened when the wa
